Journals / Politeknik Dergisi / 2007 / Cilt: 10 - Sayı: 2

The Effect of Square Hole on Thermal Stresses in an Aluminum Metal-Matrix Cross-Ply Laminated Composites

Pages
163–171
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results were given in graphical forms

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the effect of a square hole on thermal stresses in a cross ply laminated composite plates reinforced steel fiber-aluminum metal-matrix was examined.
📊
Key Findings & Data:The stacking sequences of composite were also selected as symmetric (0/90)s and antisymmetric (0/90)2 manners.
💡
Conclusion & Impact:The results were given in graphical forms
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Thermal stresses · finite element method · laminated composites

Abstract

In this study, the effect of a square hole on thermal stresses in a cross ply laminated composite plates reinforced steel fiber-aluminum metal-matrix was examined. Laminated composite plates were composed of four orthotropic layers. The stacking sequences of composite were also selected as symmetric (0/90)s and antisymmetric (0/90)2 manners. Uniform temperature distribution was selected as thermal loading. Finite element method (FEM) was performed to calculate the magnitude of the thermal stresses, ANSYS software was used during the solution. The width square laminated plate-to-the square hole dimension, a/b, was chosen as 5. The results were given in graphical forms

Özet

In this study, the effect of a square hole on thermal stresses in a cross ply laminated composite plates reinforced steel fiber-aluminum metal-matrix was examined. Laminated composite plates were composed of four orthotropic layers. The stacking sequences of composite were also selected as symmetric (0/90)s and antisymmetric (0/90)2 manners. Uniform temperature distribution was selected as thermal loading. Finite element method (FEM) was performed to calculate the magnitude of the thermal stresses, ANSYS software was used during the solution. The width square laminated plate-to-the square hole dimension, a/b, was chosen as 5. The results were given in graphical forms.

🔖

Cite This Article

ŞEN, F. (2007). The Effect of Square Hole on Thermal Stresses in an Aluminum Metal-Matrix Cross-Ply Laminated Composites. Politeknik Dergisi, Cilt: 10 - Sayı: 2, 163–171. https://ajindex.com/articles/306759

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...