Journals / Politeknik Dergisi / 2009 / Cilt: 12 - Sayı: 3

The prediction of compressive strength of high temperature implemented additive concrete using fuzzy logic and regression methods

Yüksek sıcaklık uygulanmış katkılı betonunun bulanık mantık ve regresyon yöntemiyle basınç dayanımın tahmini

Pages
195–200
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As the result of the study, it was observed that the fuzzy logic model for the due to higher temperature and ultra sound transition values was better than the multi-linear regression model.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:When materials are faced with high temperature, physical and chemical changes in their structure and these changes are irreversible.
📊
Key Findings & Data:In the study compressive strengths of concrete samples produced with mixing air carried additives for 5 different temperatures were tried to predict using multi linear regression and fuzzy logic methods.
💡
Conclusion & Impact:As the result of the study, it was observed that the fuzzy logic model for the due to higher temperature and ultra sound transition values was better than the multi-linear regression model.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

When materials are faced with high temperature, physical and chemical changes in their structure and these changes are irreversible. It is crucial to predict these structure changes for buildings. In the study compressive strengths of concrete samples produced with mixing air carried additives for 5 different temperatures were tried to predict using multi linear regression and fuzzy logic methods. These samples were casted in of 50x100 mm dimension. The compressive strengths and ultrasound transition values were obtained on these samples. The higher temperature and ultrasound transition speeds were used as input for the determination of compressive strength values. As the result of the study, it was observed that the fuzzy logic model for the due to higher temperature and ultra sound transition values was better than the multi-linear regression model.

Özet

Malzemeler yüksek sıcaklıkla karşı karşıya kaldıkları zaman içyapılarında geri dönüşümü mümkün olmayan fiziksel ve kimyasal değişimler olmaktadır. Bu değişimlerin önceden bilinmesi konut yapılar için son derece önemlidir. Bu çalışmada, hava sürüklenmiş katkı (HSK) ilave edilerek üretilmiş betonlara 5 farklı yüksek sıcaklık değerinde çoklu doğrusal regresyon ve bulanık mantık yöntemi kullanılarak basınç dayanım değerleri tahmin edilmeye çalışılmıştır. Beton örnekler 50x100 mm ebatlarında hazırlanmıştır. Numunelere ultrases geçiş hızı ve basınç dayanım deneyleri yapılmıştır. Sonuçta yüksek sıcaklık ve ultrases geçiş hızı değerlerine bağlı olarak bulanık mantık modelinin çoklu doğrusal regresyon modeline göre daha iyi sonuç verdiği görülmüştür.

🔖

Cite This Article

DURMUŞ, G., CAN, Ö. (2009). The prediction of compressive strength of high temperature implemented additive concrete using fuzzy logic and regression methods. Politeknik Dergisi, Cilt: 12 - Sayı: 3, 195–200. https://ajindex.com/articles/306658

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (17)

  1. Erdoğan, TY., Admixtures For Concrete, ODTU Geliştirme Vakfı Yayn. ve Ltş Şti., Ankara,, ss 10-11. (1997
  2. Topçu, İ.B., “Yapı Malzemeleri ve Beton”, Eskişehir, (2006
  3. Akman, M.S., Akçay, B., “Kimyasal Beton Katkıların Gelimi ve Çimentolarla Uyumu”, Yapılarda Kimyasal Katkılar (Beton ve Harçlar) Sempozyumu, 24-258, ss 15- 32 Ankara,(2005
  4. Erdoğan, TY., “Beton”, ODTU Geliştirme Vakfı Yayn. ve iltş şti., Ankara,, ss 140-160. (2003
  5. Troxell, G.E., Davis, H.E., ‘‘Composition and Properties of Concrete’’, Mc Graw-Hill Book Comp. Inc., NewYork,, pp. 66-74. (1956
  6. Parlak, N., Akman, M.S., “Lignosüfonatların Üretimi, Özellikleri ve Süper akışkanlaştırıcı Olarak Geliştirilmesi”, SİKA Teknik Bülten, s. 3-13. (2002/1
  7. Tosun, M., “Beton Katkı Maddeleri ve Önemi”, Kuzey Kıbrıs 1. Beton Kongresi,, s. 133-139. (1990)
  8. Yüzer, N., Akbaş, B., Kızılkanat, A.B., “Yüksek Sıcaklık Etkisinde Kalan Betonun Basınç Dayanımı-Renk Değişimi İlişkisinin Yapay Sinir Ağları Yöntemi ile Tahmini”, 7. Ulusal Beton Kongresi, s. 271-280, (2007)
  9. Demirel, B., Gönen, T., “Yüksek Sıcaklığın Karbon Lif Takviyeli Hafif Betonda Basınç Dayanımı Ve Poroziteye Etkisi”, Mühendislik Bilimleri Dergisi, s. 223-228. (2008)
  10. Elmas, Ç., “Bulanık Mantık Denetleyiciler”, ISBN 975 347 613 2, Seçkin yayınevi, Ankara, 26, (2003)
  11. Zadeh, L.A., 1965 “Fuzzy sets” Information And Concrete”, 8, 338-352. (1965)
  12. Beycioğlu, A., Kılınçarslan, Ş., Başyiğit C., Emiroğlu M., Akkurt, İ., "Yapay Sinir Ağları İle Ağır Betonların Basınç Dayanımının Tahmini" Fırat Univ. Fen Ve Muh. Bilimleri Dergisi 20-4, 609-616, (2008)
  13. Demir, F., Gençoğlu, M., ve Güler, K., “Çelik Tel Takviyeli Betonların Gerilme-Şekil Değiştirme Davranışı için Bir Bulanık Mantık Yaklaşımı”, Türkiye İnşaat Mühendisliği 17. Teknik Kongre ve Sergisi, İstanbul, 15- 16-17 Nisan (2004)
  14. Murat Y.Ş., Gedizlioğlu E., A Fuzzy Logic Multi-phased Signal Control Model for Isolated Junctions, Transportation Research Part C: Emerging Technologies, 13, 19- 36s., (2005)
  15. Şen, Z., Fuzzy Algorithm for Estimation of Solar Irradiation from Sunshine Duration,Solar Energy, 63, 1, 39-49, (1998)
  16. Murat, Y. Ş., Uludağ N., “Bulanık Mantık ve Lojistik Regresyon Yöntemleri ile Ulaşım Ağlarında Geçki Seçim Davranışının Modellenmesi İMO Teknik Dergi, 4363 - 4379, Yazı 288, (2008
  17. TS EN 480-8, “Kimyasal Katkılar - Beton, Harç ve Şerbet İçin- Deney Metotları- Bölüm 8: Katı Madde Muhtevası Tayini”, Türk Standartları Enstitüsü, (200