Journals / Politeknik Dergisi / 2018 / Cilt: 21 - Sayı: 4

Corrosion Behavior of AA5754 Thin Sheets Welded with Cold Metal Transfer Method

Soğuk Metal Transferi ile Birleştirilen AA5754 Alaşımı İnce Sacların Korozyon Davranışı

Pages
907–911
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Hardness test was applied and maximum hardness values were observed in weld metal.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:AA5754 aluminium alloy are widely used in outer and inner panels of automobiles.
📊
Key Findings & Data:Present study aimed to investigate the corrosion rate of cold metal transfer (CMT) welded 2 mm thick AA5754 sheets.
💡
Conclusion & Impact:Hardness test was applied and maximum hardness values were observed in weld metal.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:AA5754 · CMT kaynağı · korozyon

Abstract

AA5754 aluminium alloy are widely used in outer and inner panels of automobiles. Present study aimed to investigate the corrosion rate of cold metal transfer (CMT) welded 2 mm thick AA5754 sheets. Welded sheets were produced with 73.97, 86.18, 108.99 J/mm heat input values using ER5356 filler wire. Effect of heat input on corrosion rate was determined by Tafel extrapolation method. It was determined that corrosion rate increased with increasing heat input. Corroded surfaces were viewed by SEM. Hardness test was applied and maximum hardness values were observed in weld metal.

Özet

AA5754 alüminyum alaşımı, otomobillerin iç ve dış panellerinde yaygın olarak kullanılmaktadır. Bu çalışmada, soğuk metal transferi (CMT) ile birleştirilen 2 mm kalınlığındaki AA5754 levhaların, kaynak işlemi sonrası korozyon hızının araştırılması amaçlanmıştır. Kaynak işlemi ER5356 dolgu teli kullanılarak 73.97, 86.18, 108.99 J/mm ısı girdisi değerlerinde gerçekleştirilmiştir. Isı girdisinin korozyon hızına etkisi Tafel ekstrapolasyon yöntemi ile belirlenmiştir. Isı girdisinin artmasıyla korozyon hızının arttığı tespit edilmiştir. Korozyona uğramış yüzeyler taramalı elektron mikroskobu (SEM) ile incelenmiştir.

🔖

Cite This Article

DURMUŞ, H., ÇÖMEZ, N. (2018). Corrosion Behavior of AA5754 Thin Sheets Welded with Cold Metal Transfer Method. Politeknik Dergisi, Cilt: 21 - Sayı: 4, 907–911. https://ajindex.com/articles/306486

References (14)

  1. Simoncini, M., Forcellese, A., “Effect of the welding parameters and tool configuration on micro-and macro-mechanical properties of similar and dissimilar FSWed joints in AA5754 and AZ31 thin sheets”, Materials & Design, 41: 50-60, (2012)
  2. Han, L., Thornton, M., Boomer, D., Shergold, M., “A correlation study of mechanical strength of resistance spot welding of AA5754 aluminium alloy”, Journal of Materials Processing Technology, 211(3): 513-521, (2011)
  3. Liu, A., Tang, X., Lu, F., “Study on welding process and prosperities of AA5754 Al-alloy welded by double pulsed gas metal arc welding”, Materials & Design, 50: 149-155, (2013)
  4. Jin, H., Saimoto, S., Ball, M., Threadgill, P. L., “Characterisation of microstructure and texture in friction stir welded joints of 5754 and 5182 aluminium alloy sheets”, Materials science and technology, 17(12): 1605-1614, (2001)
  5. Taşkın, M., Çalıgülü, U., “AISI 430/1010 Çelik Çiftinin Lazer Kaynağında Kaynak Gücünün Birleşmeye Etkisi”, Fırat University Journal of Engineering, 21 (1): 11-22, (2009)
  6. Kang, M., Kim, C., “Joining Al 5052 alloy to aluminized steel sheet using cold metal transfer process”, Materials & Design, 81: 95–103, (2015)
  7. Grzybicki, M., Jakubowski, J., “Comparative tests of steel car body sheet welds made using CMT and MIG/MAG methods”, Welding International, 27(8): 610–615, (2013)
  8. Cao, R., Sun, J. H., Chen, J. H., Wang, P., “Weldability of CMT Joining of AA6061-T6 to Boron Steels with Various Coatings”, Welding Journal, 93: 193–204, (2014)
  9. Kah, P., Suoranta, R., Martikainen, J., “Advanced gas metal arc welding processes”, The International Journal of Advanced Manufacturing Technology, 67(1-4): 655–674, (2012)
  10. Rajeev, G. P., Kamaraj, M., Bakshi, S. R., “Al-Si-Mn Alloy Coating on Aluminum Substrate Using Cold Metal Transfer (CMT) Welding Technique”, JOM, 66(6): 1061–1067, (2014)
  11. Casalino, G., Mortello, M., Leo, P., Benyounis, K. Y., Olabi, A. G., “Study on arc and laser powers in the hybrid welding of AA5754 Al-alloy”, Materials & Design, 61: 191-198, (2014)
  12. Barlas, Z., Özsaraç, U., “Effects of FSW Parameters on Joint Properties of AlMg3 Alloy”, Welding Journal, 91: 16-22, (2012)
  13. Costa, M. I., Verdera, D., Costa, J. D., Leitao, C., Rodrigues, D. M., “Influence of pin geometry and process parameters on friction stir lap welding of AA5754-H22 thin sheets”, Journal of Materials Processing Technology, 225: 385-392, (2015)
  14. Halambek, J., Berković, K., V