Journals / Politeknik Dergisi / 2018 / Cilt: 21 - Sayı: 4

Review and Analysis Study on Schottky Structures

Schottky Yapılar Üzerine İnceleme ve Analiz Çalışması

Pages
977–989
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The statistical analysis results indicate that the academic studies made for every type of Schottky structures over the world and Turkey increase for almost every year.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Although quite a few number of theoretical and experimental studies are still carried out on metal-semiconductor contacts which forms in case of a tight contact of metal and semiconductor under high temperature and vacuum, the formation and transmission mechanisms of the barrier between metal and semiconductor have not yet been fully elucidated.
📊
Key Findings & Data:It has been tried to improve the performance of the Schottky structures without or with interfacial layers such as insulator or polymer and ferroelectric by using various materials with different physical, chemical and electrical properties from past to present.
💡
Conclusion & Impact:The statistical analysis results indicate that the academic studies made for every type of Schottky structures over the world and Turkey increase for almost every year.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Schottky yapı · MY schottky yapılar · arayüzey tabakalı schottky yapılar

Abstract

Although quite a few number of theoretical and experimental studies are still carried out on metal-semiconductor contacts which forms in case of a tight contact of metal and semiconductor under high temperature and vacuum, the formation and transmission mechanisms of the barrier between metal and semiconductor have not yet been fully elucidated. Since the initial detailed studies about these structures were made by W. Schottky, these metal-semiconductor contacts are generally known as Schottky diodes/structures. It has been tried to improve the performance of the Schottky structures without or with interfacial layers such as insulator or polymer and ferroelectric by using various materials with different physical, chemical and electrical properties from past to present. The significant features not found in other diodes, such as its ability to operate at very high frequencies and low forward bias, and very fast switching capability, the widespread use in electronic technology, and the fact that its technology is open for development encourage scientists to study on Schottky structures. Together with the investigation of the metal-semiconductor and the metal-semiconductor with interfacial layer Schottky structures by considering the scientific studies on Schottky structures, the observation of its progress over time, the statistical analysis of academic studies in this area over the world and Turkey have been made in this study. Ultimately, it is aimed to reveal the situation of Turkey over the world in terms of scientific studies. At the same time, to what extent the scientific studies on distinct MS structures get reciprocity in the world and in Turkey is set forth. The analysis of the academic studies which are scanned by Science Citation Index (SCI) in Web of Science database and made in Turkey as well as all over the world were performed with data mining by utilizing automated data collection methods and SQL Server Management Studio program. The statistical analysis results indicate that the academic studies made for every type of Schottky structures over the world and Turkey increase for almost every year.

Özet

Yüksek sıcaklık ve vakum altında metal ve yarı iletkenlerin sıkı kontak edilmesi durumunda oluşan metal-yarı iletken kontaklar üzerinde hala çok sayıda teorik ve deneysel çalışma yapılıyor olmasına rağmen metal ve yarı iletken arasındaki bariyerin oluşumu ve iletimi mekanizmaları henüz tam olarak aydınlatılmamıştır. Bu yapılar hakkında yapılan ilk detaylı çalışmalar W. Schottky tarafından yapıldığından, bu metal-yarı iletken kontaklar genellikle Schottky diyotlar/yapılar olarak bilinir. Geçmişten günümüze farklı fiziksel, kimyasal ve elektriksel özelliklere sahip çeşitli malzemeler kullanılarak arayüzey tabakalar olmaksızın veya yalıtkan, polimer ve ferroelektrik gibi arayüzey tabakalar içeren Schottky yapıların performansı arttırılmaya çalışılmıştır. Çok yüksek frekanslarda ve düşük ileri ön gerilimde çalışabilmesi ve çok hızlı anahtarlama kabiliyeti gibi diğer diyotlarda bulunmayan özellikleri, elektronik teknolojideki yaygın kullanımı ve gelişime açık teknolojiye sahip olması bilim insanlarını Schottky yapıları üzerinde çalışmaya teşvik etmektedir. Bu çalışmada, metal yarıiletken ve arayüzey tabakasına sahip metal yarıiletken Schottky yapıların bu alanda yapılan bilimsel çalışmalar da göz önüne alınarak incelenmesi, zaman içindeki gelişiminin gözlenmesi ile birlikte dünya ve Türkiye’de bu alanda yapılan akademik çalışmaların istatistiksel analizi yapılmıştır. Sonuçta, Türkiye'nin bilimsel çalışmalar bakımından dünyanın neresinde olduğunu açığa çıkartmak amaçlanmıştır. Aynı zamanda farklı MY yapılar üzerine yapılmış bilimsel çalışmaların Türkiye ve dünyada ne oranda karşılık gördüğü de ortaya konulmuştur. Web of Science veri tabanında Science Citation Index (SCI) tarafından taranan ve hem Türkiye’de hem de tüm dünyada yapılan akademik çalışmaların analizi veri madenciliği ile otomatik veri toplama yöntemleri ve Structured Query Language (SQL) sunucu yönetim stüdyosu programı kullanılarak yapılmıştır. İstatistiksel analiz sonuçları her alanda Schottky yapılar üzerine Türkiye ve dünyada yapılan akademik çalışmaların nerede ise her sene artış gösterdiğini göstermektedir.

🔖

Cite This Article

TAN, S. O. (2018). Review and Analysis Study on Schottky Structures. Politeknik Dergisi, Cilt: 21 - Sayı: 4, 977–989. https://ajindex.com/articles/306466

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Sze S. M., Kwok K. Ng., “Physics of Semiconductor Devices” 3rd ed., John Wiley & Sons, 9780470068328, New Jersey, (2007)
  2. Rhoderick E. H. and Williams R. H., “Metal Semicondutor Contacts”, 2nd ed., Oxford Press, 0198593368, USA, (1988)
  3. Northrop D. C. and Rhoderick E. H, “The Physics of Shottky barriers, in Impedance Devices”, Solid State Electronics, 4: 37-73, (1978)
  4. Sharma B. L., “Metal-Semiconductor Schottky Barrier Junctions and Their Applications”, Plenum Press, 9781468446555, New York, (1984)
  5. Soylu M. and Yakuphanoglu F., “Photovoltaic and interface state density properties of the Au/n-GaAs Schottky barrier solar cell”, Thin Solid Films, 519: 1950-1954, (2011)
  6. Farag A. A. M., Yahia I. S. And Fadel M., “Electrical and photovoltaic characteristics of Au/n-CdS Schottky diode”, Int. J. Hydrogen Energ., 34: 4906-4913, (2009)
  7. Sharma A. T., Shahnawaz, Kumar S., Katharria Y. S and Kanjilal D., “Barrier modification of Au/n-GaAs Schottky diode by swift heavy ion irradiation”, Nuclear Instruments and Methods in Physics Research Section B, 263: 424, (2007)
  8. Demirezen S., Özavcı E. and Altındal Ş., “The effect of frequency and temperature on capacitance/conductance–voltage (C/G–V) characteristics of Au/n-GaAs Schottky barrier diodes (SBDs)”, Materials Science in Semiconductor Processing, 23: 1-6, (2014)
  9. Gökçen M., Altuntaş H., Altındal Ş. and S. Özçelik, “Frequency and voltage dependence of negative capacitance in Au/SiO2/n-GaAs structures”, Materials Science in Semiconductor Processing, 15: 41–46, (2012)
  10. Bhajantri R. F., Ravindrachary V., Harisha A., Ranganathalah C. and Kumaraswamy G. N., “Effect of barium chloride doping on PVA microstructure positron annihilation study”, Appl. Phys. A, 87: 797-805, (2007)
  11. Afandiyeva I. M., Dökme İ., Altındal Ş., Bülbül M. M. and Tataroğlu A., “Frequency and voltage effects on the dielectric properties and electrical conductivity of Al–TiW–Pd2Si/n-Si structures”, Microelectronic Engineering, 85: 247-252, (2008)
  12. Bilkan Ç., Zeyrek S., San S. E. and Altındal Ş., “A compare of electrical characteristics in Al/p-Si (MS) and Al/C2OH12/p-Si (MPS) type diodes using current–voltage (I–V) and capacitance–voltage (C–V) measurements”, Materials Science in Semiconductor Processing, 32: 137-144, (2015)
  13. Sze S. M., Crowell C.R. and Khang D., “Photoelectric Determination of TheImage Force Dielectric Constant For Hot Electrons in Schottky Barriers”, J.Appl. Phys., 35: 2534-2536,