Journals / Politeknik Dergisi / 2019 / Cilt: 22 - Sayı: 1

Heat Pipe Evacuated Tubular Solar Collector Performance Improvement by Applications Of Nanofluid

Isı Borulu Güneş Kollektörlerinde Nano Çözelti ile Performansın İyileştirilmesi

Pages
245–257
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The outcomes from this study shows that using Nano fluids in ETSCs provides following benefits: Low thermal resistance, high thermal conductivity, higher working temperatures, acceleration in reaching working temperature and improvement in efficiency.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:There are many different type of solar energy systems, which are being used widely for different applications.
📊
Key Findings & Data:The most popular type is FP, which was invented in 1950s and this type is predominantly used for last three decades not only in residential but also industrial areas.
💡
Conclusion & Impact:The outcomes from this study shows that using Nano fluids in ETSCs provides following benefits: Low thermal resistance, high thermal conductivity, higher working temperatures, acceleration in reaching working temperature and improvement in efficiency.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Isı Borusu · Güneş Kollektörleri · Nano Çözelti

Abstract

There are many different type of solar energy systems, which are being used widely for different applications. The most important element of these solar systems is solar collector. There are four main types: Flat Panel (FPSC), Evacuated Tube, Heat Pipe and Parabolic. The most popular type is FP, which was invented in 1950s and this type is predominantly used for last three decades not only in residential but also industrial areas. This is because of two main factors: low initial investment and easy usage. Efficiency of FPSCs are mainly effected by 3 parameters: working fluid thermal conductivity, heat losses and optical losses. Due to low efficiency of FPSCs, Evacuated Tubular Heat Pipe Solar Collectors (ETSCs) are now being studied to replace FPSCs. In this type of solar collectors, optical and thermal losses are minimized and performance of the system is better. In this study, ETSCs which are tested by charging Nano fluid were studied and these researches are very limited in the literature. Last studies proved that Nano fluids are increasing thermal efficiency especially in heat pipes. The outcomes from this study shows that using Nano fluids in ETSCs provides following benefits: Low thermal resistance, high thermal conductivity, higher working temperatures, acceleration in reaching working temperature and improvement in efficiency.

Özet

Güneş enerjili sistemler, günümüzde çok farklı alanlarda, farklı amaçlar için yaygın olarak kullanılmaktadır. Güneş enerjili sistemlerin en önemli elemanı güneş kollektörleridir. Güneş kollektörleri genel olarak düzlem yüzeyli (DYGK), vakum tüplü (VTGK), ısı borulu (IBGK) ve parabolik (PGK) olmak üzere dört tipe ayrılmakla beraber en yaygın olarak DYGK kullanılmaktadır. DYGK’nin verimini etkileyen parametreler; kollektörlerde kullanılan akışkanın ısıl iletkenliği, ısı kayıpları ve optik kayıplardır. DYGK’ların düşük verimlerinden dolayı son zamanlarda güneş enerjili sistemlerde VTGK ve IBGK’ların harmonizasyonu olan vakum tüplü ısı borulu güneş kollektörleri (VTIBGK) kullanılmaya başlanmıştır. VTIBGK’lar DYGK’lerin termik ve optik kayıplarını minimize etmekte ve verim artmaktadır. Bu çalışmada Güneş kollektörlerinde verimi etkileyen diğer bir parametre çalışma akışkanı olup literatürde örneğine pek rastlanmamış olunan amorf yapıdaki nano partiküller kullanılarak hazırlanmış nano akışkanların performansa etkisi irdelenmiştir. Son yıllarda yapılan çalışmalarda nanoakışkanları ısıl sistemlerde ve özellikle ısı borularında iyi sonuçlar verdiği ve verimlerini dikkate değer derecede arttırdığı görülmüştür. VTIBK’lerde nano çözelti kullanılması ile düşük ısıl direnç, yüksek ısıl iletkenlik, yüksek çalışma sıcaklıkları, kısa sürede istenen sıcaklık değerlerine ulaşılması ve verimin arttırılması hedeflenmektedir.

🔖

Cite This Article

SU, U. Ö., SÖZEN, A., MENLİK, T. (2019). Heat Pipe Evacuated Tubular Solar Collector Performance Improvement by Applications Of Nanofluid. Politeknik Dergisi, Cilt: 22 - Sayı: 1, 245–257. https://ajindex.com/articles/306370

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. Hussein A. K., Lib D., Kolsic L., Katad S., Sahooe B., A Review of Nano Fluid Role to Improve the Performance of the Heat pipe Solar Collectors, Energy Procedia 109 ( 2017 ) 417 – 424 2. Sabiha M. R., Saidur R., Mekhilef S., Mahian O., Progress and latest developments of evacuated tube solar collectors, Renewable and Sustainable Energy Reviews 3. Muhammad J. M., Muhammad I. A., Sidik N. A. C., Yazid M. N. A. M., Thermal performance enhancement of flat-plate and evacuated tube solar collectors using nanofluid, International Communications in Heat and Mass Transfer 76 (2016) 6–15 4. Arslan G. (2007), Üç Kolonlu Titreşimli Isı Borusunun Matematiksel Modellenmesi Ve Deneysel İncelenmesi, Yüksek Lisans Tezi, İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü 2007 5. Leong K.Y., Ong H. C., Amer N.H., Norazrina M.J., Risby M.S., KuAhmad K.Z., An overview on current application of nanofluids in solar thermal collector and its challenges, Renewable and Sustainable Energy Reviews 53 (2016) 1092 – 1105 6. Devendiran D. K., Amirtham V. A., A review on preparation, characterization, properties and applications of nanofluids, Renewable and Sustainable Energy Reviews 60 (2016) 21 – 40 7. Akilu S., Sharma K.V., Baheta A. T., Mamat R., A review of thermo physical properties of water based composite nano fluids, Renewable and Sustainable Energy Reviews 66 (2016) 654 –678 8. ERSÖZ M. A., YILDIZ A., Isı Borulu Vakum Tüp Güneş Kollektörlerinde Optimum Boru Çapının Belirlenmesi, Abdullah Yıldız Şablon 28.03.2013 9. ACAR B., ÖZ E. S. ve GEDİK E., Ayrık Ve Birleşik Isı Borulu Kollektör Verimlerinin Deneysel Olarak İncelenmesi, Makine Eğitimi Bölümü, Teknik Eğitim Fakültesi, Karabük Üniversitesi 10. Sarsam W. S., Kazi S.N., Badarudin A., A review of studies on using nanofluids in flat-plate solar collectors, Solar Energy 122 (2015) 1245–1265 11. Ghaderian J., Sidik N. A. C., An experimental investigation on the effect of Al2O3/distilled water nanofluid on the energy efficiency of evacuated tube solar collector, International Journal of Heat and Mass Transfer 108 (2017) 972–987 12. Krishnam M, Bose S., Das C., Boron nitride (BN) nanofluids as cooling agent in thermal management system (TMS), Applied Thermal Engineering 106 (2016) 951–958 13. Beybin İ., Kurt M., Ertürk H., Experimental investigation of heat transfer enhancement and viscosity change of hBN nanofluids, Experimental Thermal and Fluid Science 77 (2016) 272–283 14. İnternet: B