Journals / Politeknik Dergisi / 2019 / Cilt: 22 - Sayı: 1

Effect of Water Based Varnishes Added Nano-Graphene on the Surface Properties of Beech (Fagus orientalis Lipsky) Wood

Kayın (Fagus orientalis Lipsky) Odununun Yüzey Özelliklerine Nano-Grafen Katkılı Su Bazlı Verniklerin Etkisi

Pages
203–212
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

According to the results of the research, the surface glossiness ​​of the samples decreased and the roughness values increased slightly due to the increase of NG in the varnish.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:ABSTRACT In this study, surface glossiness, roughness, hardness, color change, and varnish adhesion resistance properties of beech (Fagus orientalis Lipsky) wood samples coated with nano-graphene (NG) modified water based varnishes were investigated. 0.25%, 0.50% and 1% by weight of NG were added to the water-based varnish and the prepared solution was applied to the samples surfaces.
📊
Key Findings & Data:According to the results of the research, the surface glossiness ​​of the samples decreased and the roughness values increased slightly due to the increase of NG in the varnish.
💡
Conclusion & Impact:As a result, it may be recommended that NG addition can be prefer in the water based varnishes to provide high adhesion strength and in the surface darkening process.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Yüzey özellikleri · ağaç malzeme · vernik

Abstract

ABSTRACT In this study, surface glossiness, roughness, hardness, color change, and varnish adhesion resistance properties of beech (Fagus orientalis Lipsky) wood samples coated with nano-graphene (NG) modified water based varnishes were investigated. 0.25%, 0.50% and 1% by weight of NG were added to the water-based varnish and the prepared solution was applied to the samples surfaces. According to the results of the research, the surface glossiness ​​of the samples decreased and the roughness values increased slightly due to the increase of NG in the varnish. On the other hand, the increase in the amount of NG provided significant increases in varnish adhesion resistance up to 25%. The surface hardness value of beech samples increased up to 13% after varnishing. However in contrast to the predicted, effect of NG on hardness values was found to be insignificant. On the other hand, the values of L*, a* and b* decreased significantly with the increase of NG ratio. The samples were darkened and the green-blue color tendency of the samples increased. As a result, it may be recommended that NG addition can be prefer in the water based varnishes to provide high adhesion strength and in the surface darkening process.

Özet

Bu çalışmada, nano-grafen (NG) ile modifiye edilmiş su bazlı vernik uygulanan kayın (Fagus orientalis Lipsky) odunu örneklerinin yüzey parlaklık, pürüzlülük, sertlik ve renk değişimi ile vernik yapışma direnci özellikleri araştırılmıştır. Su bazlı vernik içerisine, ağırlıkça %0.25, %0.50 ve %1 NG eklenmiş ve ardından hazırlanan vernik çözeltisi örnek yüzeylerine uygulanmıştır. Araştırma sonuçlarına göre, vernik içerisine eklenen NG miktarındaki artışa bağlı olarak örneklerin yüzey parlaklık değerleri azalmış, pürüzlülüğü ise bir miktar artmıştır. Diğer taraftan, NG miktarındaki artış sonucu kayın örneklerdeki vernik yapışma direncinde %25’e kadar önemli artışlar sağlanmıştır. Vernik uygulamalarından sonra örneklerin yüzey sertlik değeri artmıştır. Ancak, sertlik artışında NG’in etkisi öngörülenin aksine önemsiz bulunmuştur. Ayrıca, NG katkısı ve miktarındaki artış sonucu örneklerin L*, a* ve b* renk değerleri önemli oranda azalmıştır. Örnekler koyulaşmış ve yeşil-mavi renk eğilimi artmıştır. Sonuç olarak, su bazlı vernikte yüksek yapışma direncinin sağlanmasında ve ağaç malzemenin koyu tonlarda renklendirilmesinde NG’in değerlendirilmesi önerilebilir.

🔖

Cite This Article

PELİT, H., MUSTAFA, K. (2019). Effect of Water Based Varnishes Added Nano-Graphene on the Surface Properties of Beech (Fagus orientalis Lipsky) Wood. Politeknik Dergisi, Cilt: 22 - Sayı: 1, 203–212. https://ajindex.com/articles/306366

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Vardanyan V., Galstian T., Riedl B., “Effect of addition of cellulose nanocrystals to wood coatings on color changes and surface roughness due to accelerated weathering”, Journal of Coatings Technology and Research, 12 (2): 247-258, (2015)
  2. U.S. Environmental Protection Agency, Cleaning Up Commonly Found Air Pollutants, The Plain English Guide to the Clean Air Act, (2007)
  3. T.C. Çevre, ve Orman Bakanlığı, Birleşmiş Milletler İklim Değişikliği Çerçeve Sözleşmesi Kyoto Protokolü, (1998)
  4. Yıldız E., “Water based paint and coatings expectations and water based polyurethane bonding systems”, Tübitak, (1999)
  5. Sönmez A., Budakçı M., “Ağaç işlerinde üstyüzey işlemleri ІІ., Koruyucu katman ve boya/vernik sistemleri”, Gazi Üniversitesi Teknik Eğitim Fakültesi, Sevgi Ofset, Ankara, (2004)
  6. Overbeek A., “Polymer heterogeneity in waterborne coatings”, Journal of Coatings Technology and Research, 7(1): 1-21, (2010)
  7. Pelit H., “Yoğunlaştırma ve ısıl işlemin doğu kayını ve sarıçamın bazı teknolojik özellikleriyle üstyüzey işlemlerine etkisi”, Doktora Tezi, Gazi Üniversitesi Fen Bilimleri Enstitüsü, (2014)
  8. Yakın M., “Su bazlı verniklerde sertlik, parlaklık ve yüzeye yapışma mukavemetinin tespiti”, Yüksek Lisans Tezi, Gazi Üniversitesi Fen Bilimleri Enstitüsü, (2001)
  9. Budakçı M., Sönmez A., “Bazı ahşap verniklerin farklı ağaç malzeme yüzeylerindeki yapışma direncinin belirlenmesi”, Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 25(1): 111-118, (2010)
  10. Çakıcıer N., Korkut S., Korkut D.S., “Varnish layer hardness, scratch resistance, and glossiness of various wood species as affected by heat treatment”, BioResources, 6(2): 1648-1658, (2011)
  11. Keskin H., Tekin A., “Abrasion resistances of cellulosic, synthetic, polyurethane, waterborne and acidhardening varnishes used woods”, Construction and Building Materials, 25(2): 638-643, (2011)
  12. Söğütlü C., Nzokou P., Koc I., Tutgun R., Döngel N., “The effects of surface roughness on varnish adhesion strength of wood materials”, Journal of Coatings Technology and Research, 13(5): 863-870, (2016)
  13. Altun S., Esmer M., “Isıl İşlemin Bazı Ağaç Malzemelerde Yüzey Pürüzlülüğü ve Vernik Yapışma Direncine Etkisi”, Politeknik Dergisi, 20(1): 231-239, (2017)
  14. Atar M., Peker H., “Effects of impregnation with boron compounds on the surface adhesion strength of varnishes used woods”, African Journal of Environmental Science and Technology, 4(9): 603-609, (2010)
  15. Peker H., “A