Journals / Research on Engineering Structures and Materials / 2021 / Cilt: 7 - Sayı: 2

Experimental investigation on use of ferrochrome slag as an alternative to natural aggregates in concrete structures

Pages
225–244
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was concluded that 60% replacement of natural coarse aggregate with air cooled ferrochrome slag and 60% replacement of natural fine aggregate with water cooled ferrochrome slag in concrete is feasible.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In view of reducing the cost of concrete and to meet the demand of conventional raw materials used in concrete, various industrial and solid wastes are being studied for their utilization in concrete without affecting its fresh, hardened and durability properties.
📊
Key Findings & Data:Presence of chromium in Cr+3 and Cr+6 state in ferrochrome slag is an area of concern towards its feasibility to be used as a constituent material in concrete.
💡
Conclusion & Impact:It was concluded that 60% replacement of natural coarse aggregate with air cooled ferrochrome slag and 60% replacement of natural fine aggregate with water cooled ferrochrome slag in concrete is feasible.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

In view of reducing the cost of concrete and to meet the demand of conventional raw materials used in concrete, various industrial and solid wastes are being studied for their utilization in concrete without affecting its fresh, hardened and durability properties. Ferrochrome slag is waste material obtained from manufacturing of high carbon ferrochromium alloy. Depending upon cooling process, two types of ferrochrome slag are produced i.e. air cooled by letting molten slag cooled down under normal temperature and water cooled ferrochrome slag by quenching molten slag. Presence of chromium in Cr+3 and Cr+6 state in ferrochrome slag is an area of concern towards its feasibility to be used as a constituent material in concrete. In this study, physical and chemical properties of both types of slags were evaluated to check the feasibility of replacing natural fine aggregates with water cooled ferrochrome slag and natural coarse aggregates with air cooled ferrochrome slag. In concrete mix designs, natural aggregates were replaced with ferrochrome slag at replacement levels of 30%, 60% and 100%. Mixes were prepared at two w/c ratios and were evaluated for different fresh, hardened and durability properties of concrete. It was concluded that 60% replacement of natural coarse aggregate with air cooled ferrochrome slag and 60% replacement of natural fine aggregate with water cooled ferrochrome slag in concrete is feasible.

🔖

Cite This Article

OJHA, P. N., SINGH, A., SINGH, B., PATEL, V. (2021). Experimental investigation on use of ferrochrome slag as an alternative to natural aggregates in concrete structures. Research on Engineering Structures and Materials, Cilt: 7 - Sayı: 2, 225–244. https://ajindex.com/articles/306362

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (9)

  1. Panda CR, Mishra KK, Panda KC, Nayak BD, Nayak BB. ʻEnvironmental and technical assessment of ferrochrome slag as concrete aggregate material, Construction and Building Materials, 49, 2013.
  2. Sahu N, Biswas A, Kapure GU, A short review on utilization of ferrochromium slag, Mineral Processing and Extractive Metallurgy Review, 2016.
  3. Lind BB, Fallman AM, Larsson LB. Environmental impact of ferrochrome slag in road construction, International Conference on the Science and Engineering of Recycling for Environmental Protection, 2001.
  4. Khalifa J, “Research on the use of Ferro-Chrome slag in civil engineering applications.” MATEC Web of Conferences, 2018
  5. Panda CR, Mishra KK, Panda KC, Nayak BD, Nayak BB. Environmental and technical assessment of ferrochrome slag as concrete aggregate material, Construction and Building Materials, 2013.
  6. Sathwik SR, Sanjith J, Sudhakar GN. Development of high strength concrete using ferrochrome slag aggregate as replacement to coarse aggregate, American Journal of Engineering Research, 2016
  7. Zyranov FA, Bukreev AB, Zyranova OO. Heavy Concrete on Cement with slag of low carbon ferrochrome. Electric Journal of Structural Engineering, 2016, [8] IS: 2386 - 1963 (Reaffirmed 2002). “Methods of Test for Aggregates for Concrete”. BIS, New Delhi [9] IS 4032 -1995. “Method of chemical analysis of hydraulic cement”. BIS, New Delhi [10] ASTM D5233 – 92 (2009). “Standard Test Method for Single Batch Extraction Method for Wastes”. ASTM International, West Conshohocken, PA [11] IS: 1199 -1959 (Reaffirmed 2004). “Methods of Sampling and Analysis of Concrete”. BIS, New Delhi [12] IS: 383-2016. “Coarse and Fine Aggregate for Concrete – Specification (Third Revision)”. BIS, New Delhi [13] Government of India, Ministry of Environment, Forest and Climate Change, published in the gazette of India, extraordinary, part II, section 3, sub-section (i
  8. ASTM C1260-14. “Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)”. ASTM International, West Conshohocken, PA [15] IS: 516 - 1959 (Reaffirmed 2004). “Methods of test of strength of concrete”. BIS, New Delhi [16] IS: 5816 - 1999 (Reaffirmed 2004), Splitting Tensile Strength of Concrete - Method of Test”. BIS, New Delhi
  9. ASTM C1202-19. “Standard Test Me