Journals / Research on Engineering Structures and Materials / 2017 / Cilt: 3 - Sayı: 2

A reactive poly(styrene sulfonic acid) catalyst preparation and usage for fuel additive ester production

Pages
89–97
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Better results were obtained as 77.9 % acid conversion at 343 K when alcohol:acid feed molar ratio was 4:1.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The production of new generation fuels from sustainable resource is prominent issue of the current world.
📊
Key Findings & Data:Only small amount usage of lignocellulosic based additives such as ethyl valerate (EV) increases the energy density of fuel.
💡
Conclusion & Impact:Better results were obtained as 77.9 % acid conversion at 343 K when alcohol:acid feed molar ratio was 4:1.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

The production of new generation fuels from sustainable resource is prominent issue of the current world. A wide range of feedstock can be used to produce first generation liquid fuel from starch to corn. Besides the first one, second generation fuel is considered as fuel additive for increasing the calorific value of gasoline and limiting the hazardous gas emission. Only small amount usage of lignocellulosic based additives such as ethyl valerate (EV) increases the energy density of fuel. Due to the non-hazardous and less irritant properties of ethyl valerate it is defined as “green fuel”. It was reported that the 10-20% blend ratio of EV with gasoline causes a significant improvement for engine performance. EV is chemically produced by esterification reaction between ethanol and valeric acid. Reaction can be carried out by means of heterogeneous, homogeneous acid catalyst, lipase and ionic liquids and reactive polymers. In this study, a reactive poly (styrene sulfonic acid) (PSSA) catalyst was prepared and used for ethyl valerate synthesis at different temperature conditions. Effect of alcohol:acid feed molar ratio was also investigated as a function of acid conversion. Better results were obtained as 77.9 % acid conversion at 343 K when alcohol:acid feed molar ratio was 4:1.

🔖

Cite This Article

NİGİZ, F. U., HİLMİOĞLU, N. D. (2017). A reactive poly(styrene sulfonic acid) catalyst preparation and usage for fuel additive ester production. Research on Engineering Structures and Materials, Cilt: 3 - Sayı: 2, 89–97. https://ajindex.com/articles/302690

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Luo L, Van der Voet E,Huppes G, Udo de Haes HA. Allocation issues in LCA methodology: a case study of corn stover-based fuel ethanol. Int J Life Cycle Assess. 2009; 14: 529–539. http://dx.doi.org/10.1007/s11367-009-0112-6
  2. VonBlottnitz H, Curran MA. A review of assessments conducted on bio-ethanol as a transportation fuel from a net energy, greenhouse gas, and environmental life cycle perspective. Journal of Cleaner Production. 2007;15: 607-619. http://dx.doi.org/10.1016/j.jclepro.2006.03.002
  3. Balat M, Balat H. Recent trends in global production and utilization of bio-ethanol fuel. Applied Energy. 2009; 86: 2273–2282. http://dx.doi.org/10.1016/j.apenergy.2009.03.015
  4. Pan T, Deng J, Xu Q,, Xu Y, Guo QX, Fu Y. Catalytic conversion of biomass-derived levulinic acid to valerate esters as oxygenated fuels using supported ruthenium catalysts. Green Chem. 2013; 15: 2967-2974. http://dx.doi.org/10.1039/c3gc40927a
  5. Lange J, Price R, Ayou PM, Louis J, Petrus L, Clarke L, Gosselink H.Valeric Biofuels: A Platform of Cellulosic Transportation Fuels. AngewandteChemie International Edition. 2010; 49: 4479–4483. http://dx.doi.org/10.1002/anie.201000655
  6. Climent MJ, Corma A, Iborra S. Conversion of biomass platform molecules into fuel additives and liquid hydrocarbon fuels. Green Chem. 2014; 16: 516-547. http://dx.doi.org/10.1039/c3gc41492b
  7. Dong L, He L, Tao G, Hu C. High yield of ethyl valerate from the esterification of renewable valeric acid catalyzed by amino acid ionic liquids. RSC Advances. 2013; 3; 4806-4813. http://dx.doi.org/10.1039/c3ra23034a
  8. Giovana SP, Barros M, Ranulfo MA, Elias BT. Production of Ethyl Valerate from Burkholderiacepacia Lipase Immobilized in Alginate. Chemical Engineering Transactions. 2013; 32: 1063-1068
  9. Alonso DM, Wettstein SG, Dumesic JA. Gamma-valerolactone, a sustainable platform molecule derived from lignocellulosic biomass. Green Chem. 2013; 15: 584-595. http://dx.doi.org/10.1039/c3gc37065h
  10. Chan-Thaw CE, Marelli M, Psaro R, Ravasio N, Zaccheria F. New generation biofuels: γ-valerolactone into valeric esters in one pot. RSC Adv. 2013; 3: 1302-1306. http://dx.doi.org/10.1039/C2RA23043G
  11. Raghavendra T, Sayania D, Madamwar D. Synthesis of the 'green apple ester' ethyl valerate in organic solvents by Candida rugosa lipase immobilized in MBGs in organic solvents: Effects of immobilization and reaction parameters. Journal of Molecular Catalysis B: Enzymatic. 2010; 63: 31–38. http://dx.doi.org/10.1016/j.molcatb.2009.11.015
  12. Bayramoglu G, Hazer B, Altı