Journals / Research on Engineering Structures and Materials / 2020 / Cilt: 6 - Sayı: 4

Investigation on the manufacturing variants influential on the strength of 3D printed products

Pages
293–313
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The conducted literature survey results indicate that besides the filament material, the nozzle speed and diameter, layer thickness, filament diameter, printing raster angle, printing pattern, temperature and infill density are parameters which influence the final product quality and mechanical properties in term of ultimate tensile strength, yield stress and elasticity modulus.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This paper investigates the manufacturing variants influential on the strength of 3D printed products.
📊
Key Findings & Data:In contrast to the traditional manufacturing methods which produce the final product via removing materials from parts, in 3D printing technology the products are provided with adding layer by layer directly from a digital file. 3D printing technology due to overcoming the many difficulties and limitations of conventional fabrication approaches is a rapidly progressing technology which takes attention in many industries such as aerospace, automotive, medical and building industries.
💡
Conclusion & Impact:The conducted literature survey results indicate that besides the filament material, the nozzle speed and diameter, layer thickness, filament diameter, printing raster angle, printing pattern, temperature and infill density are parameters which influence the final product quality and mechanical properties in term of ultimate tensile strength, yield stress and elasticity modulus.
🔬Design:Survey & Empirical Study
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

This paper investigates the manufacturing variants influential on the strength of 3D printed products. In contrast to the traditional manufacturing methods which produce the final product via removing materials from parts, in 3D printing technology the products are provided with adding layer by layer directly from a digital file. 3D printing technology due to overcoming the many difficulties and limitations of conventional fabrication approaches is a rapidly progressing technology which takes attention in many industries such as aerospace, automotive, medical and building industries. This paper aims to research the variants affecting the mechanical properties of components produced by 3D printing technologies. To reach this aim a comprehensive review was conducted to determine the various process and geometric parameters in 3D printing technologies. The conducted literature survey results indicate that besides the filament material, the nozzle speed and diameter, layer thickness, filament diameter, printing raster angle, printing pattern, temperature and infill density are parameters which influence the final product quality and mechanical properties in term of ultimate tensile strength, yield stress and elasticity modulus. It is concluded that 3D printing filament materials strength has direct affect on the strength of final product. By providing the adequate thermal behavior of the system, the cohesion between layers can be improved. Extrusion speed affects surface roughness and quality of the produced components. Nozzle diameter has a significant influence on interlayer cohesion. The honeycomb pattern due to facilitating the load transfer between layers provides higher mechanical strength. Findings of this study will guide the researchers and manufacturers to select appropriate printing parameters to produce component with optimum mechanical properties.

🔖

Cite This Article

MERAM, A., SÖZEN, B. (2020). Investigation on the manufacturing variants influential on the strength of 3D printed products. Research on Engineering Structures and Materials, Cilt: 6 - Sayı: 4, 293–313. https://ajindex.com/articles/302682

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Additive Manufacturing ASTM52900 - 15
  2. Xu T, Zhao W, Zhu J, Albanna, M, Yoo J. and Atala, A. Complex heterogeneous tissue constructs containing multiple cell types prepared by inkjet printing technology. Biomaterials, 2013: 34(1), pp.130-139. https://doi.org/10.1016/j.biomaterials.2012.09.035 [3]Kruth J. Material Incress Manufacturing by Rapid Prototyping Techniques. CIRP Annals. 1991;40(2):603-614.
  3. Wohlers T. Tracking Global Growth in Industrial-Scale Additive Manufacturing. 3D Printing and Additive Manufacturing. 2014;1(1):2-3
  4. Kruth J, Levy G, Klocke F, Childs T. Consolidation phenomena in laser and powder-bed based layered manufacturing. CIRP Annals. 2007;56(2):730-759.
  5. Peres F, Martin C. Design methods applied to the selection of a rapid prototyping resource. 1999 7th IEEE International Conference on Emerging Technologies and Factory Automation Proceedings ETFA '99 (Cat No99TH8467).
  6. New manufacturing milestone: 30,000 additive fuel nozzles | GE Additive [Internet]. Ge.com. 2020 [cited 9 April 2020]. Available from: https://www.ge.com/additive/blog/new-manufacturing-milestone-30000-additivefuel- nozzles [8] Bhushan B, Caspers M. An overview of additive manufacturing (3D printing) for microfabrication. Microsystem Technologies. 2017; 23(4): 1117-1124
  7. Woesz A. Rapid Prototyping to Produce Porous Scaffolds with Controlled Architecture for Possible use in Bone Tissue Engineering. Virtual Prototyping & Bio Manufacturing in Medical Applications. 2010:171-206. https://doi.org/10.1007/978-0-387-68831- 2_9 [10] Salonitis K, Tsoukantas G, Stavropoulos P, Stournaras A. A critical review of stereolithography process modeling. 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, 377-384, 2003
  8. Pham DT., Dimov SS. Rapid Prototyping Process. Rapid Manufacturing, 1st edition, Springer, London, 2001: 19-40, 978-1-4471-0703-3.
  9. Sood A, Ohdar R, Mahapatra S. Experimental investigation and empirical modelling of FDM process for compressive strength improvement. Journal of Advanced Research. 2012;3(1):81-90.
  10. Nikzad M, Masood S, Sbarski I. Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling. Materials & Design. 2011;32(6):3448-3456. htt