Journals / Research on Engineering Structures and Materials / 2020 / Cilt: 6 - Sayı: 1

Preparation of single-and double-layer antireflective coatings by sol-gel method

Pages
1–21
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

However,still a 5-6% achievement in transmittanceof glass in 400-800nm range was attained by optimizing the thickness of each layer using different withdrawal speeds,and concentration and types of the precursor sols.Characterization of the coatings was performed with SEM, AFM, EDS and FTIR analysis

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Antireflective (AR) SiO2coatings were developed in this work to increasethe transmittance of glass in the visible light range of 400-800nm, due to their potential applicationson solar energy systems.
📊
Key Findings & Data:Also, double-layer AR coatings were preparedby covering AR SiO2layer with a dense TiO2layer with the aim of protecting AR layer from environmental effects.
💡
Conclusion & Impact:However,still a 5-6% achievement in transmittanceof glass in 400-800nm range was attained by optimizing the thickness of each layer using different withdrawal speeds,and concentration and types of the precursor sols.Characterization of the coatings was performed with SEM, AFM, EDS and FTIR analysis
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

Antireflective (AR) SiO2coatings were developed in this work to increasethe transmittance of glass in the visible light range of 400-800nm, due to their potential applicationson solar energy systems. Also, double-layer AR coatings were preparedby covering AR SiO2layer with a dense TiO2layer with the aim of protecting AR layer from environmental effects. SiO2coatings were obtainedwith sol-gel and dip coating methods, by using acid-and base-catalyzed silica sols as precursors. Only 1% transmittance increase was gained with acid-catalyzed SiO2coating due to its dense structure. On the contrary, SiO2coatings formed by base-catalyzed sol havetransmittance >99% in the 460-660nm range and of 99.8% at 550nm, corresponding to the wavelength at maximum intensityof solar spectrum. This high valueswereattributed to the porous structure of the film revealed by SEM and AFManalysis, and to the optimized thickness of coating achieved at 90-120mm/min withdrawal speeds. Transmittance of base-catalyzed SiO2coatings decreased to an average value of 96.2% after coated with high refractive index TiO2layer. However,still a 5-6% achievement in transmittanceof glass in 400-800nm range was attained by optimizing the thickness of each layer using different withdrawal speeds,and concentration and types of the precursor sols.Characterization of the coatings was performed with SEM, AFM, EDS and FTIR analysis

🔖

Cite This Article

İKİZLER, B. (2020). Preparation of single-and double-layer antireflective coatings by sol-gel method. Research on Engineering Structures and Materials, Cilt: 6 - Sayı: 1, 1–21. https://ajindex.com/articles/302627

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Huang X, Yuan Y, Liu S, Zhang L, Hong R. Preparation of hydrophobic broadband antireflective SiO2coating on flexible poly(methyl methacrylate) substrates. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2018; 538: 519 -525.
  2. Agustín-Sáenz C, Machado M, Tercjak A. Antireflective mesoporous silica coatings by optimization of water content in acid-catalyzed sol-gel method for application in glass covers of concentrated photovoltaic modules. Journal of Colloid and Interface Science, 2019; 534: 370 -380.
  3. Mozumder MS, Mourad A-H I, Pervez H, SurkattiR. Recent developments in multifunctional coatings for solar panel applications: A review. Solar Energy Materials and Solar Cells, 2019; 189: 75 -102.
  4. Ye H, Zhang X, Zhang Y, Ye L, Xiao B, Lv H, Jiang B. Preparation of antireflective coatings with high transmittance and enhanced abrasion-resistance by a base/acid two-step catalyzed sol-gel process. Solar Energy Materials & Solar Cells, 2011; 95: 2347 -2351.
  5. Grosjean A, Soum-Glaude A, Neveu P, Thomas L. Comprehensive simulation and optimization of porous SiO2 antireflective coating to improve glass solar transmittance for solar energy applications. Solar Energy Materials and Solar Cells, 2018; 182: 166 -177.
  6. Xu YJ, Liao JX, Cai QW, Yang XX. Preparation of a Highly-Reflective TiO2/SiO2/Ag Thin Film with Self-Cleaning Properties by Magnetron Sputtering for Solar Front Reflectors. Solar Energy Materials & Solar Cells, 2013; 113: 7 -12.
  7. Huang WH, Lin CS. Robust superhydrophobic transparent coatings fabricated by a low-temperature sol-gel process. Applied Surface Science, 2014; 305: 702 -709.
  8. Raut HK, Ganesh VA, Nair AS, Ramakrishna S. Anti-reflective coatings: A critical, in-depth review. Energy Environ. Sci., 2011; 4: 3779 -3804.
  9. Priyadarshini BG, Sharma AK. Design of multi-layer anti-reflection coating for terrestrial solar panel glass. Bull. Mater. Sci., 2016; 39(3): 683 -689.
  10. Kavaklı İ.G., Kantarlı K. Single and Double-Layer Antireflection Coatings on Silicon. Turkish Journal of Physics, 2002; 26: 349 -354
  11. Biswas PK, Suj