Journals / Research on Engineering Structures and Materials / 2019 / Cilt: 5 - Sayı: 2

Microstructure, hardness and biocompatibility properties of ceramic based coatings produced by plasma spray method

Pages
127–136
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Biocompatibility tests reveal the most compatible and consistent results in terms of cytotoxicity were obtained with Al2O3-40% TiO2 coating.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Ceramic materials with excellent mechanical, corrosion and abrasion resistance is set in terms of features such as biomaterials.
📊
Key Findings & Data:In this study, Al2O3, Al2O3-40% TiO2, ZrO2 - 8% Y2O3 and Cr2O3-2% TiO2 ceramic coatings were produced by plasma spraying on AISI 316L stainless steel surface.
💡
Conclusion & Impact:Biocompatibility tests reveal the most compatible and consistent results in terms of cytotoxicity were obtained with Al2O3-40% TiO2 coating.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

Ceramic materials with excellent mechanical, corrosion and abrasion resistance is set in terms of features such as biomaterials. In this study, Al2O3, Al2O3-40% TiO2, ZrO2 - 8% Y2O3 and Cr2O3-2% TiO2 ceramic coatings were produced by plasma spraying on AISI 316L stainless steel surface. It was aimed to investigate microstructure, hardness and biocompatibility properties of coatings. Scanning electron microscope (SEM) analysis and X-ray diffraction (XRD) phase analysis were used to determine the microstructure and phase composition properties. The biocompatibility properties of coatings have been tried to be determined by analyzing cytotoxicity and viability. The SEM images show that the ceramic coatings are connected in accordance with the substrate. The XRD analyzes show the formation of binary and ternary complex phases in the coating layers. Cr2O3- 2% TiO2 coating has the highest hardness in the coating layers. Biocompatibility tests reveal the most compatible and consistent results in terms of cytotoxicity were obtained with Al2O3-40% TiO2 coating.

🔖

Cite This Article

ISLAK, S., EMİN, N., ÖZORAK, C., HRAAM, H. R. H. (2019). Microstructure, hardness and biocompatibility properties of ceramic based coatings produced by plasma spray method. Research on Engineering Structures and Materials, Cilt: 5 - Sayı: 2, 127–136. https://ajindex.com/articles/302619

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Wong, JY, Bronzino, JD. Biomaterials, CRC Press, Taylor&Francis Group, LLC, 2007
  2. Williams, DF. Williams dictionary of biomaterials, Liverpool University Press 1999
  3. Lutıšanová, G, Kuzıelová, E, Palou, MT, Kozánková, J. Static and Dynamic In Vitro Test of Bioactivity of Glass Ceramics, Ceramics – Silikáty, 2011; 55(2): 106-113
  4. Demirkıran, H. (2003). Biyocam Takviyeli Hidroksiapatit Kompozitlerinin Geliştirilmesi, MSc. Thesis, İTÜ Fen Bilimleri Enstitüsü, İstanbul
  5. Lee, KY, Park, M, Kim, HM, Lim, YJ, Chun, HJ, Kim, H, Moon, SH. Ceramic bioactivity: progresses, challenges and perspectives. Biomedical materials, 2006; 1(2):R31–R37.
  6. Heimann, RB. Plasma-spray coating, VCH, New York, 1996
  7. Tian, W, Wang, Y, Yang, Y. Three body abrasive wear characteristics of plasma sprayed conventional and nanostructured Al2O3-13% TiO2 coatings. Tribology International, 2010; 43(5-6):876-881.
  8. Castell, JV, Gmez-Lechn, MJ. In vitro methods in pharmaceutical research. Elsevier, 1996.
  9. Pawlowski, L. The science and engineering of thermal spray coatings, John Wiley & Sons, Ltd., England. 2008
  10. Pantelis, DI, Psyllaki, P, Alexopoulos, N. Tribological behaviour of plasma-sprayed Al2O3 coatings under severe wear conditions. Wear, 2000; 237: 197-204.
  11. Song, EP, Ahn, J, Lee, S, Kim, NJ. Effects of critical plasma spray parameter and spray distance on wear resistance of Al2O3-8 wt.%TiO2 coatings plasma-sprayed with nanopowders. Surface and Coatings Technology, 2008; 202: 3625-3632.
  12. Datye, A, Koneti, S, Gomes, G, Wu, KH, Lin, HT. Synthesis and characterization of aluminum oxide-boron carbide coatings by air plasma spraying. Ceramics International, 2010; 36: 1517-1522.
  13. Wang, Y, Jiang, S, Wang, M, Wang, S, Xiao, TD, Strutt, PR. Abrasive wear characteristic of plasma sprayed nanostructured alumina/titania coatings. Wear, 2000; 237: 176– 185.
  14. Sun, Y, Li, B, Yang, D, Wang, T, Sasaki, Y, Ishii, K. Unlubricated friction and wear behaviour of zirconia ceramics. Wear, 1998; 215: 232-236.
  15. Cadenas, M, Vijande, R, Montes, HJ, Sierra, JM. Wear behaviour of laser cladded and