Journals / Research on Engineering Structures and Materials / 2019 / Cilt: 5 - Sayı: 2

Flexural properties of glass fiber/epoxy/MWCNT composites

Pages
91–98
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

An increase in interfacial adhesion between glass fibers and epoxy matrix due to the existing of the carbon nanotubes was the reason of the improvement of the flexural properties of carbon nanotubes integrated composites.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Glass fiber/epoxy resin/multi-walled carbon nanotubes (MWCNTs) were used to fabricate the nano materials integrated thermoset composite materials in this study.
📊
Key Findings & Data:The best improvement of the flexural modulus and strength with 19% and 7% were obtained by the samples in the 90° direction and MWCNTs compared to the samples without MWCNTs.
💡
Conclusion & Impact:An increase in interfacial adhesion between glass fibers and epoxy matrix due to the existing of the carbon nanotubes was the reason of the improvement of the flexural properties of carbon nanotubes integrated composites.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

Glass fiber/epoxy resin/multi-walled carbon nanotubes (MWCNTs) were used to fabricate the nano materials integrated thermoset composite materials in this study. Thermoset composites with and without nano materials were fabricated using resin transfer molding (RTM) methods. In order to characterize fabricated samples, three-point flexural tests were used. The best improvement of the flexural modulus and strength with 19% and 7% were obtained by the samples in the 90° direction and MWCNTs compared to the samples without MWCNTs. An increase in interfacial adhesion between glass fibers and epoxy matrix due to the existing of the carbon nanotubes was the reason of the improvement of the flexural properties of carbon nanotubes integrated composites.

🔖

Cite This Article

DEMİRCAN, Ö., ÇOLAK, P., KADIOĞLU, K., GÜNAYDIN, E. (2019). Flexural properties of glass fiber/epoxy/MWCNT composites. Research on Engineering Structures and Materials, Cilt: 5 - Sayı: 2, 91–98. https://ajindex.com/articles/302618

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (2)

  1. Meyyappan M. Carbon Nanotubes Science and Applications, CRC Press,
  2. New York, ISBN 9780849321115, 2005 [2] Agnihotri KP, Padhee SS, Bedi SH. Effect of carbon nanotube grafting on the wettability and average mechanical properties of carbon fiber/ polymer multiscale composites, Polymer Composites, 2018; 39: 1184-1195. https://doi.org/10.1002/pc.24714 [3] Prusty KR, Ray CB, Tathore KD. Mechanical, thermomechanical, and creep performance of CNT embedded epoxy at elevated temperatures: An emphasis on the role of carboxyl functionalization. Journal of Applied Polymer Science, 2017; 134: 44851-44862. [4] Avci A, Eskizeybek V, Gülce A. Preparation and mechanical properties of carbon nanotube grafted glass fabric/epoxy multi-scale composites. Advanced Composite Materials, 2017; 26: 169–180. https://doi.org/10.1080/09243046.2015.1052188 [5] Rahaman A, Imran M. Epoxy-carbon nanotubes as matrix in glass fiber reinforced laminated composites. Fullerenes, Nanotubes and Carbon Nanostructures, 2017; 25: 559–562. https://doi.org/10.1080/1536383X.2017.1330264 [6] Coelho FAL, Ramirez MA, Becker D, Amico CS, Silva da VL, Sene ST. Glass fiber hybrid composites molded by rtm using a dispersion of carbon nanotubes/clay in epoxy. Materials Research, 2013; 16: 1128–1133. https://doi.org/10.1590/S1516- 14392013005000104 [7] Zhou Y, Pervin F, Lewis L, Jeelani S. Fabrication and characterization of carbon/epoxy composites mixed with multi-walled carbon nanotubes. Materials Science and Engineering A, 2008; 475: 157–165. https://doi.org/10.1016/j.msea.2007.04.043 [8] Mahato KK, Rathor e DK, Prusty RK, Dutta K and Ray BC. Tensile behavior of MWCNT enhanced glass fiber reinforced polymeric composites at various crosshead speeds. IOP Conf. Ser. Mater. Sci. Eng., 2017; 178. https://doi.org/10.1088/1757- 899X/178/1/012006 [9] Panchagnula KK, Kuppan P, Improvement in the mechanical properties of neat GFRPs with multi-walled CNTs. J Mater Res Technol., 2018; https://doi.org/10.1016/j.jmrt.2018.02.009 [10] Zeng S, Duan P, Shen M, Xue Y, Lu F, Lu, Y, Interface enhancement of glass fiber fabric/ epoxy composites by modifying fibers with functionalized MWCNTs. Composite Interfaces, 2018; https://doi.org/10.1080/09276440.2018.1499354 [11] Sager RJ, Klein PJ, Lagoudas DC, Zhang Q, Liu J, Dai L, Baur JW. Effect of carbon nanotubes on the interfacial shear strength of T650 carbon fiber in an epoxy matrix. Composite Science and Technology, 2009; 69: 898–904. https://doi.org/10.1016/j.compscitech.20