Journals / Research on Engineering Structures and Materials / 2019 / Cilt: 5 - Sayı: 4

A simplified method for analysis of reinforced concrete beams exposed to fire situation

Pages
335–346
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

At the end of this work, it was concluded that the proposed simplified method, besides this being a method that allows an easy application, presents results, in general, in favor of safety; and, withal, allows more economics results when compared with the tabular method.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The reinforced concrete structural design consists in determining the structural members dimensions, steel ratio and location of steel rebars so that a limit state is not reached.
📊
Key Findings & Data:Currently, when considering fire effects, commercial design software, in general, are limited to do the verifications only based on the tabular method, according to ABNT NBR 15200, without considering internal and external forces, so the designer needs to change the dimensions of the concrete section.
💡
Conclusion & Impact:At the end of this work, it was concluded that the proposed simplified method, besides this being a method that allows an easy application, presents results, in general, in favor of safety; and, withal, allows more economics results when compared with the tabular method.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

The reinforced concrete structural design consists in determining the structural members dimensions, steel ratio and location of steel rebars so that a limit state is not reached. Currently, when considering fire effects, commercial design software, in general, are limited to do the verifications only based on the tabular method, according to ABNT NBR 15200, without considering internal and external forces, so the designer needs to change the dimensions of the concrete section. This fact does not stimulate the use of the Brazilian standard codes since they do not present economic solutions. This paper aims to propose a simplified method to design reinforced concrete beams, of harbor structures, in a fire situation, which allows the implementation in commercial design software. Such proposed simplified method intends to involve structural safety, improves design facilities and economy in construction. Then, through a numerical example, the practical application of the tabular and simplified method was demonstrated. The results obtained by the simplified method were more economical than the tabular method. The calculation models validation was done through a comparative study with values found in the literature, as well as those calculated by the 500 °C isotherm method, and with the software ANSYS results. At the end of this work, it was concluded that the proposed simplified method, besides this being a method that allows an easy application, presents results, in general, in favor of safety; and, withal, allows more economics results when compared with the tabular method.

🔖

Cite This Article

AMARAL, M. M. D., FERREIRA, M. W., REAL, M. D. V. (2019). A simplified method for analysis of reinforced concrete beams exposed to fire situation. Research on Engineering Structures and Materials, Cilt: 5 - Sayı: 4, 335–346. https://ajindex.com/articles/302616

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Araújo JM. Curso de Concreto Armado - 4 Vols. Rio Grande: Editora Dunas, 2014
  2. ABNT NBR 15200, de 26 de abril de 2012. Projeto de estruturas de concreto em situação de incêndio. Rio de Janeiro: Brazilian Association of Thecnical Rules
  3. Albuquerque GB de ML de. Dimensionamento de vigas de concreto armado em situação de incêndio (Master Thesis). University of São Paulo, São Paulo, 2012
  4. ABNT NBR 14432, de 30 de novembro de 2001. Exigências de resistência ao fogo de elementos construtivos de edificações - Procedimento. Rio de Janeiro: Brazilian Association of Thecnical Rules
  5. ABNT NBR 6118, de 29 de abril de 2014. Projeto de estruturas de concreto. Rio de Janeiro: Brazilian Association of Thecnical Rules
  6. Wickstrom U. A very simple method for estimating temperature in fire exposed concrete structures (SP Rapport), 1986
  7. Soares EMP. Verificação de peças usuais de concreto armado em situação de incêndio (Dissertação de mestrado). Engineering School of the Federal University of Minas Gerais, Belo Horizonte, MG, 2003
  8. Sousa DA de, Silva GP. Estruturas de concreto em situação de incêndio (Trabalho de conclusão de curso). Federal University of Goiás, Goiânia, GO, 2015
  9. Gonçalves MJCR. Comportamento ao fogo de elementos estruturais de betão: análise númerica e metodologia (PhD Thesis). Engineering Faculty of the University of Porto, Portugal, (2007)
  10. Costa CRG, Ajala GR, Júnior SÁV, Oliveira MB de, Miller CP. Estudo Comparativo da Utilização da ABNT NBR 15200:2012 e da ABNT NBR 6118:2014. REINPEC - Revista Interdisciplinar Pensamento Científico, 2(1), 2016. https://doi.org/10.20951/2446- 6778/v2n1a6