Journals / Research on Engineering Structures and Materials / 2020 / Cilt: 6 - Sayı: 1

Two simple methods for surface modification of lithium disilicate dental blocks with hydroxyapatite

Pages
97–104
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

However, the powder method has approximately 1.67 calcium/phosphate ratio which necessary for hydroxyapatite(HA)structure for higher crystallinity and lower solubility propertie

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Crowns are materials that attracting the attention and lithium disilicates among them widely used because of their high bulk mechanical features.
📊
Key Findings & Data:In this study, lithium disilicate dental blocks were coated with bioactive calcium–phosphate components usingsol–gel dip–coating methods toincrease their surface bioactivity.
💡
Conclusion & Impact:However, the powder method has approximately 1.67 calcium/phosphate ratio which necessary for hydroxyapatite(HA)structure for higher crystallinity and lower solubility propertie
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

Crowns are materials that attracting the attention and lithium disilicates among them widely used because of their high bulk mechanical features. Increasing the bioactivity of crowns has generally been a common aspect of all studies. In this study, lithium disilicate dental blocks were coated with bioactive calcium–phosphate components usingsol–gel dip–coating methods toincrease their surface bioactivity. Two coating methods called as slurry and powder methods were proposed to obtain dense and remarkable layer on the lithium disilicate substrates. The coating layers were characterized by scanning electron microscopy attached with energy dispersive spectroscopy. Coating procedures have successfully accomplished and show enhanced surface propertieswith terms of calcium/phosphate ratios. Tri–calcium phosphate obtained by the slurry method, which has 1.5 calcium/phosphate ratio, is afavorable structure for bio–absorbable. However, the powder method has approximately 1.67 calcium/phosphate ratio which necessary for hydroxyapatite(HA)structure for higher crystallinity and lower solubility propertie

🔖

Cite This Article

TOPUZ, M., DİKİCİ, B. (2020). Two simple methods for surface modification of lithium disilicate dental blocks with hydroxyapatite. Research on Engineering Structures and Materials, Cilt: 6 - Sayı: 1, 97–104. https://ajindex.com/articles/302613

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Liu P-R. A Panorama of dental CAD/CAM restorative systems. Compendium of continuing education in dentistry. 2005
  2. 29(7):507-512. [2] Figueiredo-Pina CG, Patas N, Canhoto J,Claudio R, Olhero SM, SerroAP, Ferro AC,Guedes M. Tribological behaviour of unveneered and veneered lithium disilicate dental material. Journal of the Mechanical Behavior of Biomedical Materials. 2016
  3. http://dx.doi.org/10.1016/j.jmbbm.2015.08.007 [3]Ural Ç. Diş Hekimliği Pratiğinde Tamamı Seramik ve Cad-Cam Uygulamaları. Dirim Tip Gazetesi. 2011
  4. Tysowsky G. The Science Behind Lithium Disilicate: Today’s Suprisingly Versatlie, Esthetic & DurableMetal-Free Alternative. OralHealth. 2009
  5. 99(3):93-97. [5] Topuz M. Production of Bioactive Hybrid Coatings on Beta (β) –Type Titanium Alloys, Characterization and Investigation of In-vitro Corrosion Properties, MsThesis, Yüzüncü Yıl University, Van, Turkey, 51-52,2016. [6] Dikici B, Niinomi M, Topuz M, Say Y, Aksakal B, Yılmazer H, NakaiM. Synthesis and characterization of hydroxyapatite/TiO2 coatings on the β-type titanium alloys with different sintering parameters using sol-gel method. Protection of Metals and Physical Chemistry of Surfaces. 2018
  6. 54(3):457-462. https://doi.org/10.1134/S2070205118030255 [7] Songur F, Dikici B, Niinomi M, Arslan E. The plasma electrolytic oxidation (PEO) coatings to enhance in-vitro corrosion resistance of Ti–29Nb–13Ta–4.6Zr alloys: The combined effect of duty cycle and the deposition frequency. Surface and Coatings Technology. 2019
  7. https://doi.org/10.1016/j.surfcoat.2019.06.025 [8] Xu H, Geng X, Liu G, Xiao J, Li D, Zhang Y, Zhu P, Zhang C. Deposition, nanostructure and phase composition of suspension plasma-sprayed hydroxyapatite coatings. Ceramics International. 2016
  8. 42(7): 8684-8690. https://doi.org/10.1016/j.ceramint.2016.02.102 [9] Azari A, Jamnani SN, Yazdani A,Atri F, Rasaie V, Yazdi AFA.Deposition of Crystalline Hydroxyapatite Nanoparticles on Y-TZP Ceramic: A Potential Solution to Enhance Bonding Characteristics of Y-TZP Ceramics. Journal of Dentistry (Tehran). 2017
  9. 14(2):62-68 10] Azari A, Nikzad S, Yazdani A, Atri F, Yazdi AFA. Deposition of crystalline hydroxyapatite nano-particle on zirconia ceramic: a potential solution for the poor bonding characteristic of zirconia ceramics to resin cement. Journal of Materials Science: Materials in Medicine. 2017
  10. 28(7). https://doi.org/10.1007/s10856-017-5921-8 [11] Hirota M, Hayakawa T, Ohkubo C, Sato M, Kara H, Toyama T,