Journals / Research on Engineering Structures and Materials / 2019 / Cilt: 5 - Sayı: 3

Adsorption kinetics, equilibrium and thermodynamics of gas-phase toluene onto char produced from almond shells

Pages
279–298
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was found that the adsorption of the gas-phase toluene onto char could be well represented by the pseudo-second-order kinetic model.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Toluene is the primary material in chemical process industries and is often used as a raw material in the production of many chemicals and as a solvent in many engineering processes.
📊
Key Findings & Data:The influences of adsorption parameters such as nitrogen (N2) flow rate as the gas-phase toluene carrier, char amount, gas-phase toluene concentration at the inlet and the adsorption temperature on both the adsorption capacity and adsorption efficiency were examined.
💡
Conclusion & Impact:It was found that the adsorption of the gas-phase toluene onto char could be well represented by the pseudo-second-order kinetic model.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

Toluene is the primary material in chemical process industries and is often used as a raw material in the production of many chemicals and as a solvent in many engineering processes. In this study, the material of char, which is used as an adsorbent, was produced from almond shells. The adsorption process of gasphase toluene onto char was investigated using a laboratory-scale fixed-bed reactor under atmospheric pressure. The structure of the char was characterized by BET and FTIR. The influences of adsorption parameters such as nitrogen (N2) flow rate as the gas-phase toluene carrier, char amount, gas-phase toluene concentration at the inlet and the adsorption temperature on both the adsorption capacity and adsorption efficiency were examined. It was found that the adsorption of the gas-phase toluene onto char could be well represented by the pseudo-second-order kinetic model. Equilibrium isotherm data were analyzed by the Langmuir and Freundlich isotherm models and the results indicated that the adsorption process was described well by the Langmuir isotherm model. The maximum monolayer adsorption capacity (qmax) of the char was determined as 15.42 mg g-1 for 303 K. Thermodynamic parameters such as ΔG° = -7.93 kJ mol-1, ΔH°= -17.18 kJ mol-1, ΔS°= -0.013 kJ mol-1 K-1 showed that the adsorption process was spontaneous, exothermic and physical. The results showed that the material of char produced from almond shells could be used as a biosorbent to remove the material of gas-phase toluene from various industrial and natural sources through the adsorption method.

🔖

Cite This Article

KUTLUAY, S., BAYTAR, O., ŞAHİN, Ö. (2019). Adsorption kinetics, equilibrium and thermodynamics of gas-phase toluene onto char produced from almond shells. Research on Engineering Structures and Materials, Cilt: 5 - Sayı: 3, 279–298. https://ajindex.com/articles/302607

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Koppmann R. Volatile Organic Compounds in the Atmopshere. UK.: Blackwell Publishing Ltd.; 2007.
  2. Ghoshal AK, Manjare SD. Selection of appropriate adsorption technique for recovery of VOCs: an analysis. Journal of Loss Prevention in the Process Industries. 2002;15(6):413-421.
  3. Khan FI, Kr. Ghoshal A. Removal of Volatile Organic Compounds from polluted air. Journal of Loss Prevention in the Process Industries. 2000;13(6):527-545.
  4. Pires J, Carvalho A, de Carvalho MB. Adsorption of volatile organic compounds in Y zeolites and pillared clays. Microporous and Mesoporous Materials. 2001;43(3):277- 287.
  5. Srivastava NC, Eames IW. A review of adsorbents and adsorbates in solid–vapour adsorption heat pump systems. Applied Thermal Engineering. 1998;18(9):707-714.
  6. Tsai W-T. A review of environmental hazards and adsorption recovery of cleaning solvent hydrochlorofluorocarbons (HCFCs). Journal of Loss Prevention in the Process Industries. 2002;15(2):147-157.
  7. Hindarso H, Ismadji S, Wicaksana F, Mudjijati, Indraswati N. Adsorption of Benzene and Toluene from Aqueous Solution onto Granular Activated Carbon. Journal of Chemical & Engineering Data. 2001;46(4):788-791.
  8. Jones AP. Indoor air quality and health. Atmospheric Environment. 1999;33(28):4535- 4564.
  9. Gupta VK, Verma N. Removal of volatile organic compounds by cryogenic condensation followed by adsorption. Chemical Engineering Science. 2002;57(14):2679-2696.
  10. Hwang KS, Dae Ki C, Sung Yong G, Sung Yong C. Adsorption and thermal regeneration of methylene chloride vapor on an activated carbon bed. Chemical Engineering Science. 1997;52(7):1111-1123.
  11. Naidu G, Jeong S, Johir MAH, Fane AG, Kandasamy J, Vigneswaran S. Rubidium extraction from seawater brine by an integrated membrane distillation-selective sorption system. Water Research. 2017;123:321-331.
  12. Shahmirzadi MAA, Hosseini SS, Tan NR. Enhancing removal and recovery of magnesium from aqueous solutions by using modified zeolite and bentonite and proce