Journals / Research on Engineering Structures and Materials / 2019 / Cilt: 5 - Sayı: 2

Production and characterization of ternary sheep hydroxyapatite (SHA)-wollastonite (W)-commercial inert glass (CIG) biocomposite

Pages
167–174
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The highest Vickers microhardness and compression strength values were obtained with SHA-5 wt% wollastonite- 5 wt % CIG composite sintered at 1300ºC as 197 HV and 94 MPa, respectively.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Hydroxyapatite [HA] is the most widely accepted biomaterial for the repair and reconstruction of bone tissue defects.
📊
Key Findings & Data:In this study, 5 wt% wollastonite and 5 wt% commercial inert glass were added to sheep hydroxyapatite together to improve mechanical properties.
💡
Conclusion & Impact:The highest Vickers microhardness and compression strength values were obtained with SHA-5 wt% wollastonite- 5 wt % CIG composite sintered at 1300ºC as 197 HV and 94 MPa, respectively.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

Hydroxyapatite [HA] is the most widely accepted biomaterial for the repair and reconstruction of bone tissue defects. It has all the characteristic features of biomaterials such as biocompatible, bioactive, osteoconductive, nontoxic, noninflammatory and non-immunogenic properties. It has low mechanical properties for load bearing applications. HA must be reinforced with other ceramics or metals to produce more load resistible composites. HA also can be produced from natural materials such as bovine, sheep, chicken, human bones, fish bones with simple calcination method. In this study, 5 wt% wollastonite and 5 wt% commercial inert glass were added to sheep hydroxyapatite together to improve mechanical properties. Mechanical properties of composite increased with increasing sintering temperature. The highest Vickers microhardness and compression strength values were obtained with SHA-5 wt% wollastonite- 5 wt % CIG composite sintered at 1300ºC as 197 HV and 94 MPa, respectively.

🔖

Cite This Article

DEMİRKOL, N., TURAN, M. (2019). Production and characterization of ternary sheep hydroxyapatite (SHA)-wollastonite (W)-commercial inert glass (CIG) biocomposite. Research on Engineering Structures and Materials, Cilt: 5 - Sayı: 2, 167–174. https://ajindex.com/articles/302603

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Stipniece L. Salma-Ancane K. Putnins A. and Berzina-Cimdina L. Evaluation of Sr-and/or Mg-containing Hydroxyapatite Behavior in Simulated Body Fluid, Key Engineering Materials, 2015; 631: 61 – 66.
  2. Skwarek E. Bolbukh Y. Janusz W. and Tertykh V. Hydroxyapatite Composites with Multiwalled Carbon Nanotubes. Adsorption Science & Technology, 2017; 35(5-6): 534 – 544.
  3. Encinas-Romero MA. Aguayo-Salinas S. Valenzuela-Garcia JL. Payan SR. and CastillonBarraza FF. Mechanical and Bioactive Behavior of Hydroxyapatite-Wollastonite Sintered Composites. Int, J. Appl. Ceram. Technol., 2010; 7(2): 164-177.
  4. Demirkol N. Physical and Mechanical Properties of Hydroxyapatite-WollastoniteTitania Composites. Journal of Turkish Ceramic Federation, 2016; 49: 102-109
  5. Lin K. Zhang M. Zhai W. Qu H. Chang J. Fabrication and Characterization of Hydroxyapatite/Wollastonite Composite Bioceramics with Controllable Properties for Hard Tissue Repair. Journal of the American Ceramic Society, 2011; 94(1): 99-105.
  6. Harabi A. Chehlatt S. Preperation Process of a Highly Resistant Wollastonite Bioceramics Using Local Raw Materials. Journal of Thermal Analysis and Calorimetry, 2013; 111(1): 203-211.
  7. Demirkol N. Oktar F.N. Kayali E.S. Influence of Commercial Inert Glass Addition on the Mechanical Properties of Commercial Synthetic Hydroxyapatite. Acta Physica Polonica A, 2013; 123(2): 427-429.
  8. Rocha D.N. Oliveira Cruz L.R. Prado Neto J.L. Elmassalami Ayad N.M. Gobbo L.A. and Silva M.H.P. Production and Characterization of Hydroxyapatite/Niobo Phosphate Glass Scaffold. Key Engineering Materials, 2014; 587: 128-131.
  9. Salman S. Oktar F.N. Gunduz O. Agathopoulos S. Ovecoglu M.L. Kayali E.S. Sintering Effect on Mechanical Properties of Composites Made of Bovine Hydroxyapatite(BHA) and Commercial Inert Glass (CIG). Key Engineering Materials, 2007; 330-332: 189-192.
  10. British Standard Non-metallic materials for surgical implants. Part 2. Specification for [1] Stipniece L. Salma-Ancane K. Putnins A. and Berzina-Cimdina L. Evaluation of Sr-and/or Mg-containing Hydroxyapatite Behavior in