Journals / Research on Engineering Structures and Materials / 2020 / Cilt: 6 - Sayı: 1

The electroless metal plating process over ABS plastic by using ionic liquids

Pages
45–52
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In this way, both it will be provided a significant benefit to public health, and it will be brought innovation to the metal plating industry with the environmentallyfriendly ionic liquid catalyst.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Electroless metal plating is a coating technique which relies on reduction of metal ions with an autocatalytic chemical reduction process.
📊
Key Findings & Data:Experiments were carried out with 120-500 grit sandpaper and at 80°Cplating bath temperaturefor30-120 minutes of deposition time and at different pH values as 8-9.
💡
Conclusion & Impact:In this way, both it will be provided a significant benefit to public health, and it will be brought innovation to the metal plating industry with the environmentallyfriendly ionic liquid catalyst.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

Electroless metal plating is a coating technique which relies on reduction of metal ions with an autocatalytic chemical reduction process. Ionic liquids are defined as compounds that are sensitive to the environment due to their low pressure that can be negligible, their high heat resistance, and a higher ionic conductivity, to be electrochemically rich, to have wide open liquid range, to have a range of high polar solubility. In this study, the effects of ionic liquids were investigated in the electroless metal plating process over ABS plastic. For this purpose electroless baths were prepared by using two different types of ionic liquids (EMIC & DCA) for copper and nickel plating. Experiments were carried out with 120-500 grit sandpaper and at 80°Cplating bath temperaturefor30-120 minutes of deposition time and at different pH values as 8-9. X-Ray XDL-B System, X-ray Diffraction (XRD) andScanning Electron Microscopy (SEM) were used for thecharacterization and the amount of deposits. According to the experimental and analytical results, the metal plating on ABS plastic was succeeded with two different ionic liquid additions. On the contrary of the traditional processes with chromic and sulphuric acids, the etching and the plating processes were performed with environmentally friendly chemicals. In this way, both it will be provided a significant benefit to public health, and it will be brought innovation to the metal plating industry with the environmentallyfriendly ionic liquid catalyst.

🔖

Cite This Article

URAZ, C. (2020). The electroless metal plating process over ABS plastic by using ionic liquids. Research on Engineering Structures and Materials, Cilt: 6 - Sayı: 1, 45–52. https://ajindex.com/articles/302601

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Tang XBC, Han C., Zhang B. A New Palladium Free Surface Activation Process for Ni Electroless Plating on ABS Plastic.Materials Letters, 2009
  2. https://doi.org/10.1016/j.matlet.2009.01.006 [2]Ngo HL, LeCompteK., Hargens L., McEwen AB. Thermal properties of imidazolium ionic liquids. Thermochimica Acta, 2000
  3. 358, 97-102.https://doi.org/10.1016/S0040-6031(00)00373-7 [3]MurugesanS,Linhardt RJ.Ionic liquids in carbohydrate chemistry-currenttrends and fture directions.Current Organic Synthesis, 2005
  4. https://doi.org/10.2174/157017905774322640 [4]Koura N, Nagase H, Sato A, Kumakura S, Takeuchi K, Ui K, Tsuda T, Loong C K. Electroless Plating of Aluminum from a Room-Temperature Ionic Liquid Electrolyte. Journal of Electrochemical Society, 2007
  5. https://doi.org/10.1149/1.2817880 [5]Deng MJ, Sun IW, Chen PY, Chang JK, Tsai WT.Electrodeposition behavior of nickel in the water-and air-stable 1-ethyl-3-methylimidazolium-dicyanamide room-temperature ionic liquid. Electrochimica Acta,2008
  6. 53(19):5812-5818.https://doi.org/10.1016/j.electacta.2008.03.040 [6]Linka G, Riedel W. Galvanotechnik, 1987
  7. KılıçarslanA, ToptanF, Kerti I. Akımsız Nikel Kaplama Yöntemi ve Seramik Partiküllerine Uygulanması, Türk Mühendis ve Mimar Odaları Birliği Metalurji Mühendisleri Odası, http://www.metalurji.org.tr/dergi/dergi154/d154_3337.pdf [8]Ang LL, Hor TSA, Xu GQ, Tung CH, Zhao SP, Wang JLS. Decoration of Activated Carbon Nanotubes with Copper and Nickel. Carbon, 2000
  8. https://doi.org/10.1016/S0008-6223(99)00112-8 [9]Liu Z, ChenY. Spectroscopic Studies on Tetragonal ZrO2-Supported MoO3and NiO-MoO3Systems. Journal of Catalysis, 1998
  9. https://doi.org/10.1006/jcat.1998.21. [10]RudnikE, KokoszkaK, ŁapsaJ. Comparative Studies on the Electroless Deposition of Ni-P, Co-P and Their Composites with SiC Particles. Surface & Coatings Technology, 2008
  10. https://doi.org/10.1016/j.surfcoat.2007.09.026 [11]CaturlaF, Molina F, Molina-SabioM, Rodriguez-Reinoso F, Esteban A. Electroless Plating of Graphite with Copper and Nickel. Journal of Electrochemical Science, 1995
  11. https://doi.org/10.1149/1.2048468 [12]Fukuhara C, Ohkura H, Gonohe K, IgarashiA. Low-Temperature Water-Gas Shift Reaction of Plate-Type Copper-Based Catalysts on an Aluminum Plate Prepared by Electroless Plating. Applied Catalysis A: General, 2005
  12. 195–203.https://doi.org/10.1016/j.apcata.2004.10.036 [13]Song L, Li W, Wang G, Zhang M, Tao K.