Journals / Research on Engineering Structures and Materials / 2021 / Cilt: 7 - Sayı: 1

Micro-mechanical properties of geotextile fibers: measurement and characterization at cold environmental conditions

Pages
97–120
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The experimental results show that the mechanical properties of the PP fibers do not remain constant within the common range of cold temperatures (-10 °C – 21 °C) found in typical civil engineering applications such that the temperature change was found to be an important factor affecting the PP fiber micro-mechanical properties such as modulus, strength, toughness and plastic elongation.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:One of the most important properties of a fabric (geotextile) and also one of the focus areas of the current research study is its tensile strength, and thus, mechanical properties (modulus, resilience, strength, toughness).
📊
Key Findings & Data:To this end, the mechanical properties of the geotextiles must properly be evaluated at the “macro-scale” as well as at the “micro-scale” as they are fibrous synthetic materials including polymeric fibers as well as significant volume of void space.
💡
Conclusion & Impact:The experimental results show that the mechanical properties of the PP fibers do not remain constant within the common range of cold temperatures (-10 °C – 21 °C) found in typical civil engineering applications such that the temperature change was found to be an important factor affecting the PP fiber micro-mechanical properties such as modulus, strength, toughness and plastic elongation.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

One of the most important properties of a fabric (geotextile) and also one of the focus areas of the current research study is its tensile strength, and thus, mechanical properties (modulus, resilience, strength, toughness). To this end, the mechanical properties of the geotextiles must properly be evaluated at the “macro-scale” as well as at the “micro-scale” as they are fibrous synthetic materials including polymeric fibers as well as significant volume of void space. As being a polymer, the mechanical behavior of the geotextile micro-fibers is highly dependent on the ambient conditions including particularly the temperature. In light of this, the tensile behavior of geotextile single micro-fibers was characterized by performing micro-mechanical tensile tests at “micro-scale” level at different cold temperature conditions using Dynamic Thermo- Mechanical Analyzer (DMA) to measure the developed “micro-scale” tensile stress – strain behavior of geotextile micro-fibers. The results examined from the influence of micro-mechanical properties of polymeric fibers on the observed temperature dependent stress-strain curve were used to determine the modulus of elasticity (E), modulus of resilience (UR), ultimate tensile strength (τmax), amount of plastic strain (εp), toughness (UT), rupture strength (τR) for the polypropylene (PP) micro-fiber of needle-punched nonwoven (NPNW) geotextile and the variation in those important mechanical properties with a change in ambient temperature conditions. The experimental results show that the mechanical properties of the PP fibers do not remain constant within the common range of cold temperatures (-10 °C – 21 °C) found in typical civil engineering applications such that the temperature change was found to be an important factor affecting the PP fiber micro-mechanical properties such as modulus, strength, toughness and plastic elongation. Therefore, the test results provide an index of behavior at “micro-scale” level for the polymeric geotextile single fibers at cold temperature conditions.

🔖

Cite This Article

KARADEMİR, T. (2021). Micro-mechanical properties of geotextile fibers: measurement and characterization at cold environmental conditions. Research on Engineering Structures and Materials, Cilt: 7 - Sayı: 1, 97–120. https://ajindex.com/articles/302591

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Nielsen LE,.Mechanical properties of polymers and composites. Vol. 1, 2, Marcel Dekker Inc., NY, USA, 1974
  2. Painter PC, Coleman MM. Fundamentals of polymer science. 2nd Edition, CRC press, Boca Raton, FL, USA, 1997
  3. Zhai Z, Jiang B, Drummer D. "Temperature-dependent response of quasi-unidirectional E-glass fabric reinforced polypropylene composites under off-axis tensile loading," Composites Part B, Vol. 148, No. 4, 2018, pp. 180-187.
  4. Li J-H, Hsieh J-C, Lou C-W, Hsieh,C-T, Pan Y-J, Hsing W-H, Lin J-H. "Needle punched thermally-bonded eco-friendly nonwoven geotextiles: Functional Properties," Materials Letters, Vol. 183, No. 6, 2016, pp. 77-80.
  5. Mitchell JK, Seed RB, Seed HB. "Kettleman Hills Waste Landfill Slope Failure. I: Liner System Properties," Journal of Geotechnical Engineering, Vol. 116, No. 4, 1990, pp. 647- 668.
  6. Nielsen LE, Landel RF. Mechanical Properties of Polymers and Composites. Marcel Dekker, Inc., New York, NY, USA, 1994
  7. Dowling NE. Mechanical behavior of materials. 3rd Edition, Pearson Prentice Hall, Upper Saddle River, NJ, USA, 2007, 912p
  8. Youssefi M, Safaie B. "The study on the mechanical properties of multi-walled carbon nanotube/polypropylene fibers," Journal of Institution of Engineers, India Series E, Vol. 99, No. 1, 2018, pp. 37-42.
  9. Stein RS, Powers J. Topics in Polymer Physics. Imperial College Press, London, UK, 2006, 414p.
  10. Daniels C. Polymers: Structure and Properties. Technomic Publishing Company, Inc., Lancaster, PA, USA, 1989
  11. Andrawes KZ, McGown A, Kabir Md. H. "Uniaxial Strength Testing of Woven and Nonwoven Geotextiles," Geotextiles and Geomembranes, Vol. 3, No. 1, 1984, pp. 41-56.
  12. Kobler J, Schneider M, Ospald F, Andra H, Muller R. "Fiber orientation interpolation for the multiscale analysis of short fiber reinforced composite parts," Computational Mechanics, Vol. 61, No. 4, 2018, pp. 729-750. https://doi.org/10.1007/s00466-017- 1478-0 [13] Kumar NS, Shabaridharan K, Perumalraj R, Ilango, V. "Study on cross directional tensile properties of bamboo-/polypropylene-blended needle-punched non-woven fabrics," Journal of Industrial Textiles, Vol. 47, No. 6, 2018, pp. 1342-1356. https://doi.org/10.1177/15280837176906