Journals / Research on Engineering Structures and Materials / 2021 / Cilt: 7 - Sayı: 1

The mutual interaction between the structural footprint and number of floors in steel structures

Pages
65–86
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As the number of floors and footprint area increases, the total building area increases, so the approximate building cost has also increased.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Structural dimensions and number of floors are some of the factors affecting the building behaviour under the earthquake effects.
📊
Key Findings & Data:Each axial clearance was increased by 0.5m in each structure model.
💡
Conclusion & Impact:As the number of floors and footprint area increases, the total building area increases, so the approximate building cost has also increased.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

Structural dimensions and number of floors are some of the factors affecting the building behaviour under the earthquake effects. In this study, the structural footprint and the number of floors were selected as a variable. For this purpose, a steel structure model with fixed dimensions and properties of load-bearing system elements was selected. The structural footprint was selected as the first variable and then five different structure models were created. The structural footprint was changed by setting each axial clearance in both directions. Each axial clearance was increased by 0.5m in each structure model. Three different number of floors as to be 5, 6 and 7 floors were selected as the second variable. Eigenvalue and pushover analyses were performed for each model and each number of floors. As a result of the analyses, the target displacement values for period, frequency, cumulative participation mass ratio, base shear force, settlement, stiffness and degree of damage were acquired separately. As the structural footprint and number of the floors increase, while the period, settlement and the target displacement values increased, on the contrary, there was a decrease in participation mass ratio, base shear forces and stiffness values. In the study, cost comparisons of building construction were also made considering the change in the total structural area and the number of floors. The criterion of safety and economy was ignored due to increase both in the number of floors and the footprint. This study emphasizes the importance of avoiding the unnecessary structural dimensions via optimum design principles. As structural footprint area and number of floors increase, period values increase, stiffness and seismic capacity values decrease. As the number of floors and footprint area increases, the total building area increases, so the approximate building cost has also increased.

🔖

Cite This Article

IŞIK, E., KARAŞİN, İ. B. (2021). The mutual interaction between the structural footprint and number of floors in steel structures. Research on Engineering Structures and Materials, Cilt: 7 - Sayı: 1, 65–86. https://ajindex.com/articles/302590

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Ferraioli, M. (2016). Dynamic increase factor for pushdown analysis of seismically designed steel moment-resisting frames. International Journal of Steel Structures, 16(3), 857-875.
  2. Işık, E. 2016. Consistency of the rapid assessment method for reinforced concrete buildings. Earthquakes and Structures, 11(5), 873-885.
  3. Yakut, A. 2004. Preliminary seismic performance assessment procedure for existing RC buildings. Engineering Structures, 26(10), 1447-1461. https://doi.org/10.1016/j.engstruct.2004.05.011 [4] Šipoš, T. K., Hadzima-Nyarko, M. 2017. Rapid seismic risk assessment. International Journal of Disaster Risk Reduction, 24, 348-360.
  4. Hadzima-Nyarko, M., KalmanSipos, T. 2017. Insights from existing earthquake loss assessment research in Croatia. Earthquakes and Structures, 13(4), 365-375
  5. Sucuoğlu, H. 2007. A screening procedure for seismic risk assessment in urban building stocks. Sixth National Conference on Earthquake Engineering, Istanbul, Turkey.
  6. Şengezer, B.S. 1999. The damage distribution during March 13, 1992 Erzincan earthquake. YT U. Press Release Center, 13
  7. Özdemir, M., Işık, E., Ülker, M. 2016. Performance evaluation of reinforced concrete buildings with different story numbers. BEU Journal of Science, 5(2), 183-190
  8. Korkmaz, K.A., Düzgün, M. 2006. Statik artımsal itme analizinde kullanılan yük dağılımlarının değerlendirilmesi. Teknik Dergi, 17(82), 3873-3878
  9. Sezer, F., Gençoğlu, M.,Celep, Z. 2007. Betonarme binaların deprem güvenliğinin değerlendirilmesinde deprem yönetmeliği 2007 de kurallarına örnekle kıyaslamalı bir bakış. Altıncı Ulusal Deprem Mühendisliği Konferansı, İstanbul, Turkey
  10. İlerisoy, Z.Y., Tuna, M.E. 201). Effects of plane dimensions and number of storeys on the cost of rectangular-plane buildings constructed with tunnel Form Megaron, 13(4), 559-568
  11. Safiki, A., Solikin, M., Sahid, M.N. 2015. Cost implications of building design plans: a literature review analysis, The 2ndInternational Conference on Engineering Technology and Industrial Application (ICETEA-2015), Indonesia
  12. Saidu, İ., Alumbugu, P.O., Abdulazeez, A., Ola-Awo, W.A., 2015. Assessment of the effect of plan shapes on cost of institutional buildings in Nigeria, International Refereed Journal of Engineering and Science (IRJES), 4(3), 39-50
  13. Ferry, D.