SavedAdd your journal

Journals / Madencilik Dergisi / 2005 / Cilt: 44 - Sayı: 3

The coagulation of glass industry tailings with fly ash

Cam sanayi atıklarını uçucu kül ile koagülasyonu

Oktay BAYAT
BELGİN BAYAT
HÜSEYİN VAPUR
Volkan ARSLAN
METİN UÇURUM
Pages
19–24
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

After the experiments, it was determined that fly ash can be used instead of alum in the plant as a coagulant.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study; coagulation/flocculation tests were carried out using solid tailings taken from flotation plant of Trakya Glass Industry (Mersin-Tarsus).
📊
Key Findings & Data:Alum and fly ash were used as coagulants and the pulp was mixed in Jar-Test apparatus for 30 minutes.
💡
Conclusion & Impact:After the experiments, it was determined that fly ash can be used instead of alum in the plant as a coagulant.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study; coagulation/flocculation tests were carried out using solid tailings taken from flotation plant of Trakya Glass Industry (Mersin-Tarsus). Alum and fly ash were used as coagulants and the pulp was mixed in Jar-Test apparatus for 30 minutes. Then, sedimentation behavior of the particles was investigated at 5, 10, 15, 20, 25 and 30 minutes periods. After the experiments, it was determined that fly ash can be used instead of alum in the plant as a coagulant.

Özet

Bu çalışmada; Trakya Cam Sanayi (Mersin-Tarsus) flotasyon tesisinden alınan atık üzerinde koagülasyon/flokülasyon deneyleri yapılmıştır. Koagülant olarak Afşin-Elbistan uçucu külü ve alüm kullanılmış ve süspansiyon Jar-Test deney aletinde 30 dakika süreyle karıştırılmıştır. Daha sonra 5, 10, 15, 20, 25 ve 30 dakikalık zaman aralıklarındaki çökme davranışları araştırılmıştır. Yapılan çalışmalar sonucunda koagülant olarak uçucu külün alümün yerine kullanılabileceği tespit edilmiştir.

🔖

Cite This Article

BAYAT, O., BAYAT, B., VAPUR, H., ARSLAN, V., UÇURUM, M. (2005). The coagulation of glass industry tailings with fly ash. Madencilik Dergisi, Cilt: 44 - Sayı: 3, 19–24. https://ajindex.com/articles/282210

References (11)

  1. Bayat, B., 2002. “Comparative study of adsorption properties of Turkish fly ashes I. The case of nickel(II), copper(II) and zinc(II)”, Journal of Hazardous Materials B95,251–273
  2. Bayat, O., 1998. “Characterization of Turkish Fly Ashes” Fuel, 77, (9/10), 1059-1066.
  3. Bayat, O., Kılıç, Ö., 1999.” Dewatering of glass–sand processing plant tailings with direct current”. VIII Balkan Mineral Processing Conference, Belgrade, Yugoslavia, 797-804.
  4. Cheremisinoff, P., 1988. “Coal Fly Ash: Power Plant Waste or By-Product”, Power Engineering, July, 40-41. Douglas M. C., 1974. “Waste Treatmant”, Chemical and Process Technology Encyclopedia, McGraw-Hill Book Company, 1141-1146.
  5. Fan, M., Brown, R. C., Leeuwen, J., Nomura, M., Zhuang, Y., 2003 “The kinetics of producing sulfate- based complex coagulant from fly ash”, Chemical Engineering and Processing, 42, 1019-1025
  6. Gaudin, A.M.,1967.”Principles of Mineral Dressing” McGraw-Hill Book Company, 483-487.
  7. İpekoğlu, Ü., 1997. “Susuzlandırma (Katı-Sıvı Ayrımı) ve Yöntemleri”, II. Baskı, D.E.Ü. Mühendislik Fakültesi Yayınları No: 179, 38-41.
  8. Reed, G.D., Mitchel, D.T. and Parker, D.G., 1976. “Water Quality Effect of Aqueous Fly Ash Disposal”, Proceedings of 31st Ind. Waste Conf., 337-345.
  9. Rudolf, T., Savo, T., 2004. “Fly Ashes as a Building Material”., Ore Dressing, 6, (1), 31-40.
  10. Vandenbusch, M.B. and Sell, N.J., 1992. “Fly Ash as a Sorbent for The Removal of Biologically Resistant Organic Matter”, Resources Conservation and Recycling, 6, 95-116.
  11. Zhao, Y.Q., 2004. “Settling behaviour of polymer flocculated water-treatment sludge I: analyses of settling curves.