The BE solutions are shown to be in good agreement with analytical and Finite Element (FE) solutions.
📌 3 Key Takeaways
🎯
Objective & Hypothesis:This paper presents a review of different elasto-plastic Boundary Element (BE) formulations with particular emphasis on two main approaches; the initial strain displacement-gradient approach with its modeling of the partial or full interior domain, and the particular integral approach which can be applied exclusively to the surface avoiding any modeling interior.
📊
Key Findings & Data:The initial strain formulation is implemented in a computer program using two-dimensional isoparametric quatratic elements to discretise either the complete interior domain or only the part associated with the plastic region.
💡
Conclusion & Impact:The BE solutions are shown to be in good agreement with analytical and Finite Element (FE) solutions.
🔬Design:Review & Systematic Survey
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters
Abstract
This paper presents a review of different elasto-plastic Boundary Element (BE) formulations with particular emphasis on two main approaches; the initial strain displacement-gradient approach with its modeling of the partial or full interior domain, and the particular integral approach which can be applied exclusively to the surface avoiding any modeling interior. The initial strain formulation is implemented in a computer program using two-dimensional isoparametric quatratic elements to discretise either the complete interior domain or only the part associated with the plastic region. The BE solutions are shown to be in good agreement with analytical and Finite Element (FE) solutions.
🔖
Cite This Article
GUN, H., BECKER, A. A. (1998). Boundary element formulations in elastoplastic stress analysis. Mathematical and Computational Applications, Cilt: 3 - Sayı: 3, 139–151. https://ajindex.com/articles/280418
J. L. Swedlow and T. A. Cruse, Formulation of boundary equations for three dimensional elastoplastic flow, into J. Solids and Structures 7, 1673-1683, 1971
P. Riccardella, An implementation ojthe boundmy integral technique for plane problems in elasticity and elasto plasticity, PhD thesis, Carnegie-Mellon University, 1973
A. Mendelson, A. Boundmy integral methods· in elasticity and plasticity, Report NASA TND-7418,1973
S. Murkherjee, Corrected boundary integral equations in planar thermo elastic plasticity, into.f Solids and Structures 13, 331-335, 1977
J. C. F. Telles and C A. Brebbia, The boundary elements method to plasticity, Proc. Second Int. Conf. on Recent Advances in Boundary Element Methods, Southampton, 295-317, 1980
P. K. Banerjee, and G G. Mustoe, The boundary element method for two dimensional problems of elasto- plasticity, Proc. First into Seminar on Recent Advances in boundary Element Methods Southampton, 283-300, 1978
S. Kobayashi and N Nishimura, N. Elasto-plastic analysis by the integral equation method, Proc. Symp. innovative Numerical Analysisfor the Engineering Sciences, Charlottesville, 1980
M. Morjaria and S. Mukherjee, Numerical analysis of planar time dependent inelastic deformation of plates with cracks by the boundary element method, int. J. solids and Structures 17,127-143,1981 9. L. M. O. Faria, C. A. M. Soares, MF.S.Periera, and CA.Brebbia, Boundary elements in 2D plasticity using quadratic shape functions, Applied Maths Modelling 5, 371-375,1981 10. J. C. F. Telles and C A. Brebbia, Boundary elements: new developments in elastoplastic analysis, Appl. Math. Modelling 5,376-382, 1981
K. H. Lee, A boundary integral equation methodjor two dimensional elasto-plastic analysis, PhD thesis, Imperial College, University of London, 1983
C. L. Tan and K L. Lee, Elastic plastic stress analysis ofa cracked thick-walled cylinder, J. Strain Analysis 18, 253-260, 1983
K. H. Lee and R. T. Fenner, A quadratic formulation for two dimensional elasto-plastic analysis using the boundary integral equation method, J. Strain Analysis 21, 159-175, 1986
V. Kumar and S. Mukerjee, A boundary integral equation formulation for time dependent inelastic deformation in metals, Int J. Mech. Sci. 19, 713-724, 1977
J. C. F. Telles and C. A Brebbia, Elasticlviscoplastic problems using boundary elements, int. J. Mech Sci. 24, 605-618, 1982
P. K. Banerjee and T. G. Davies, Advanced implementation of bou