Journals / Mathematical and Computational Applications / 2000 / Cilt: 5 - Sayı: 2

Elastic-plastic stress analysis in thermoplastic composite cantilever loaded by a single force

Pages
77–89
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

For the shear stress, maximum stress component is found around the x-axis.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this investigation an elastic-plastic stress analysis is carried out in a steel fiber reinforced thermoplastic composite cantilever.
📊
Key Findings & Data:Orientation angles are chosen as 0°, 30°, 45°, 60° and 90°.
💡
Conclusion & Impact:For the shear stress, maximum stress component is found around the x-axis.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this investigation an elastic-plastic stress analysis is carried out in a steel fiber reinforced thermoplastic composite cantilever. The beam is loaded by a single force at its free end. An analytical elastic-plastic solution is found by satisfying both equations of equilibrium and boundary conditions. Orientation angles are chosen as 0°, 30°, 45°, 60° and 90°. Yielding starts at upper or lower surfaces of the beam at different distances from the free end for 30°, 45°, 60° orientation angles. Maximum residual stresses are obtained at the upper and lower surfaces of the beam. For the shear stress, maximum stress component is found around the x-axis.

🔖

Cite This Article

ÖZCAN, R. (2000). Elastic-plastic stress analysis in thermoplastic composite cantilever loaded by a single force. Mathematical and Computational Applications, Cilt: 5 - Sayı: 2, 77–89. https://ajindex.com/articles/280395

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. D. Jegley. Impact-damaged graphite-thermoplastic trapezoidal-corrugation sandwich and semi- sandwich panels, Journal of Composite Materials, 27, No.5, pp. 526-538, 1993
  2. C. H. Chen. And, C. 11, Cheng, Secant moduli of a glass bead-reinforced silicone rubber specimen, Journal of Composite Materials, 30, No.1, pp. 69-83, 1996
  3. W. J. Cantwell. The influence of stamping temperature on the properties of a glass mat thermoplastic composite", Journal of Composite Materials, 30, No.11, pp. 1266-1281, 1996
  4. I. H. Tavman. Thermal and Mechanical Properties of Aliminum Powder Filled High Density Polyethylene Composites", Journal of Applied Polymer Science, 62, pp. 2161- 2167, 1996
  5. G. Jeronimidis and A. T. Parkyn. Residual stress in carbon fibre- thermoplastic matrix laminates, Journal of Composite Materials, 22, No.5, pp. 401-415, 1998
  6. D. R. J. Owen and J. A. Figueiras. Anisotropic elasto-plastic finite element analysis of thick and thin plates and shells, International Journal For Numerical Methods in Engineering, 19, pp. 541-566, 1983
  7. M. M. Domb and J. S. Hansen. The effect of cooling rate on free-edge stress development in semi-crystalline thermoplastic laminates, Journal of Composite Materials, 32, No.4, pp. 361-385, 1998. 8
  8. Chung, C. T. Sun and I. Y. Chang. Modelling creep in thermoplastic composites", Journal of Composite Materials, 27, No.10, pp. 1009-1029, 1993
  9. Y. A. Bahei-El-Din and G. J. Dvorak. Plasticity analysis of laminated composite plates, Transactions of the Asme, 49, pp. 740-746, 1982
  10. R, Karakuzu and 0. Sayman. Elasto-plastic finite element analysis of orthotropic rotating discs with holes, Computers and Structures, 51, No.6, pp. 695-703, 1994
  11. R. Karakuzu, A. Ozel and 0. Sayman. Elasto-plastic finite element analysis of metal- matrix plates with edge notches, Computers and Structures, 63, No.3, pp. 551-558, 1997. 12
  12. Sayman. Elasto-plastic stress analysis in stainless steel fiber reinforced aluminum metal matrix laminated plates loaded transversely, Composite Structures, 43, pp. 147- 154, 1998
  13. R. Karakuzu and R. Ozcan. Exact solution of elasto-plastic stresses in a metal —matrix composite beam of arbitrary orientation subjected to transverse loads, Composites Science and Technology, 56, pp. 1383-1389, 1996
  14. S. G. Lekhnitskii. Theory of Elasticity of an Anisotropic Body, Mir Publishers, Moscow, 1981
  15. R. M. Jones. Mechanics of Composite Materials, McGraw-Hill Kogakuska, Tokyo, 1975.