They were tabulated for various ring-shaped crack sizes and transversely isotropic materials.
📌 3 Key Takeaways
🎯
Objective & Hypothesis:The problem of a ring-shaped crack in an infinitely long thick layer was considered in this study.
📊
Key Findings & Data:The problem was formulated for a transversely isotropic material by using integral transform technique under uniform load.
💡
Conclusion & Impact:They were tabulated for various ring-shaped crack sizes and transversely isotropic materials.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters
Abstract
The problem of a ring-shaped crack in an infinitely long thick layer was considered in this study. The problem was formulated for a transversely isotropic material by using integral transform technique under uniform load. Due to the geometry of the configuration, Hankel integral transform technique was chosen and the problem was reduced to a singular integral equation. This integral equation was solved numerically by using Gaussian Quadrature Formulae and the values were evaluated for discrete points. Stress intensity factors were obtained by using these values. They were tabulated for various ring-shaped crack sizes and transversely isotropic materials.
🔖
Cite This Article
ATABERK, N., UYANER, M., AVCI, A. (2003). Stress intensity factors for a ring- shaped crack in a transversely isotropic thick layer. Mathematical and Computational Applications, Cilt: 8 - Sayı: 1, 79–88. https://ajindex.com/articles/280364
M. Uyaner, A. Akdemir, S. Erim, A. Avci, Plastic zones in a transversely isotropic solid cylinder containing a ring shaped crack Jnt J. Frac. 106 (2000) 161.175 [2] M. Uyaner, N. Ataberk, A. Avci, Plastic zones for a penny shaped crackin a transversely isotropic layer bonded between two isotropic half spaces, European Journal of Mechanics A-Solids, 21,401-410(2002) [3] N. Ataberk, M. Uyaner, A. Avci, Plastic zones in a transtropic thick-walled cylinder containing a ring-shaped cavity: Part 1-Theory (2002) to be appeared in the proceedings of The 14th European Conference on Fracture, 8-13 September 2002,
Cracow, Poland, [4] M. Uyaner, N. Ataberk, A. Avci, Plastic zones in a transtropic thick-walled cylinder containing a ring-shaped cavity; Part 2-Calculation (2002) to be appeared in the proceedings of The 14th European Conference on Fracture, 8-13 September 2002,
Cracow, Poland. [5] Y, Z. Chen, Stress intensity factors in a finite length cylinder with a circumferential crack, Int. Journal of Pressure Vessels and Piping 77 (2000) 439-444 [6] S.Das, B.Patra, L.Debnath,'Stress intensity factors around two co-planer Griffith cracks in an orthotropic layer sandwiched between two identical orthotropic half planes, Int.- Journal of Engineering Science 38 (2000) 121-133 [7] H. Parhi and A. Atsumi, The distribution of stress in a transversely isotropic cylinder containing a penny-shaped crack, International Journal Engineering Science 4 (1975) 675-685. [bj M. Dahan, Stress intensity factor for an infinite transversely isotropic solid containing a penny-shaped crack, Journal Physique 41 (1980) 213-215. [9] M. Dahan, Stress distribution in a transversely isotropic solid containing a penny-shaped crack, Arch.-Much. 33:3 _____ 1981) 415-428. [10] A. Atsumi and Y. Shindo, Singular stresses İn a transversely isotropic circular cylinder with circumferential edge crack, International Journal Engineering Science 17 (1979) 1229-1236. [11] Y. Konishi and A. Atsumi, Crack problem of transversely isotropic strip, International Journal Engineering, Science 11 (1973) 9-20. [12] Y. Konishi, On two coplanar cracks in an infinite transversely isotropic medium, International Journal Engineering Science 10 (1972) 917-923. [13] Fildiş, H. and Yahşi, O. S., The stress intensity factors for an infinitely long transverse^*-isotropic solid cylinder which.contains a ring-shaped cavity, ASME Winter Annual Meeting,.(199*. [14] K. Arin and F.Erdogan, Penny-shaped crack in an elastic layer