Journals / Mathematical and Computational Applications / 2003 / Cilt: 8 - Sayı: 1

Modelling tractive performance for drive wheel

Pages
49–54
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Results showed that $M_1$ model outputs were closer to experimental values than $M_2$ model outputs for prediction of traction performance

📌 3 Key Takeaways

🎯
Objective & Hypothesis:A model was developed by regression analysis to predict the tractive performance of 7.00-18 radial ply tire for agricultural tractors.
📊
Key Findings & Data:To obtain experiments values belonging to tractive performance of tire, a study was conducted in the soil bin by using a single wheel agricultural tire test machine.
💡
Conclusion & Impact:Results showed that $M_1$ model outputs were closer to experimental values than $M_2$ model outputs for prediction of traction performance
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

A model was developed by regression analysis to predict the tractive performance of 7.00-18 radial ply tire for agricultural tractors. Different parameters that affect the cone index of soil and wheel slip were considered for the analysis. To obtain experiments values belonging to tractive performance of tire, a study was conducted in the soil bin by using a single wheel agricultural tire test machine. Performance of this model was compared with model developed by Wismer and Luth (1974) to predicted tractive performance. Mathematical and statistical methods were used to fitting and analysing of models. Results showed that $M_1$ model outputs were closer to experimental values than $M_2$ model outputs for prediction of traction performance

🔖

Cite This Article

ÇARMAN, K., DÜNYAMALIOĞLU, F. (2003). Modelling tractive performance for drive wheel. Mathematical and Computational Applications, Cilt: 8 - Sayı: 1, 49–54. https://ajindex.com/articles/280355

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (9)

  1. D. V. Hinkley, N. Reid and E. J. Snell, Statistical Theory and Modelling. London, Chapman and Hall, 1991
  2. J. E. Macnab, R. B. Wensink and D. E. Booster, Modelling wheel tractor energy requirements and tractive performances. Transaction of the ASAE, 20 (4), 602-605, 1977
  3. J. H. Esch, L. L. Bashfort, K. V. Bargen and R. E. Ekstrom, Tractive performance comparisons between a rubber belt track and a four-wheel-drive tractor. Transaction of the ASAE, 33 (4), 1109-1115, 1990
  4. J. H. Esch, Tractive performance of rubber belt track and four wheel drive agricultural tractors. Unpublished M.S. Thesis, University of Nebraska, 1987
  5. J. L. Turner, A semi empirical mobility model for tracked vehicles. Transaction of the ASAE, 27 (2), 990-996, 1984
  6. J. Y. Wong, Theory of Ground Vehicles, New York, John Wiley & Sons, 1978
  7. K. Çarman, and H. Doğan, The determination of tractive performance of 7.00-18 radial tire size. National Symposium on Mechanisation in Agriculture, Urfa, Turkey, pp. 123-129,2001
  8. R. D. Wismer and H, J. Luth, Off-road traction prediction for wheeled vehicles. Transaction of the ASAE, 17 (1), 8-10, 1974
  9. S. K. Upadhyaya, Effects of tread design on bias ply tire tractive characteristics. Transaction of the ASAE, 31 (5), 1338-1345,1988.