Journals / Mathematical and Computational Applications / 1996 / Cilt: 1 - Sayı: 2

Using the growth models for optimization of energy distribution systems

Pages
169–173
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

These cases can be used in such as exact cost expressions, optimum system design, selection of the optimum design amongst the others [2,3,4,5,6], etc. in energy distribution systems.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Energy distribution systems were developed in the recent years due to increasing population, new technologies and load demand.
📊
Key Findings & Data:The purpose of this paper is a brief summary of reference [1].
💡
Conclusion & Impact:These cases can be used in such as exact cost expressions, optimum system design, selection of the optimum design amongst the others [2,3,4,5,6], etc. in energy distribution systems.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Energy distribution systems were developed in the recent years due to increasing population, new technologies and load demand. Alternative technical arrangements are made trouble to choose the best construction. On the other hand, system costs are affected for the new design and operating. That is, for a new distribution design or operation of an exist system, both technical and economical constraints must be consider. Today, the present planning is done more sensitively using various statistical methods and computer aided approaches depending on the new technology developments. Some parameters depend on system design must be considered correctly. If some of them change yearly, these changes must be included in the calculations such as load, inflation, etc. If this work is not done, then the system design may be insufficient. For example, if load growth is not considered correctly, then the system design will be affected from this situation because of operating losses. The purpose of this paper is a brief summary of reference [1]. Annual growth factors of load, loss factor and energy costs were considered to obtain the sufficient system design. So, all the cost expressions depend on these factors can be obtained correctly. Moreover, these factors were modeled in twenty-seven cases by the considered three models in "Present Worth Analysis" formulations. These cases can be used in such as exact cost expressions, optimum system design, selection of the optimum design amongst the others [2,3,4,5,6], etc. in energy distribution systems.

🔖

Cite This Article

PEKİNER, F. O. (1996). Using the growth models for optimization of energy distribution systems. Mathematical and Computational Applications, Cilt: 1 - Sayı: 2, 169–173. https://ajindex.com/articles/280237

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (5)

  1. PEKlNER F.o., "A New Approach For Cost Minimization In Underground Distribution Systems", Ph.D. Thesis, İ.T.Ü., İstanbul, 1993
  2. PEKİNER F.O., ŞENTÜRK E.,"Yeraltı Kablolu Alçak Gerilim Fiderlerinin Dizaynında Bugünkü Değer Yontemi İle İlgili Bir UyguIama", Harran Universitesi, GAP l. Mühendislik Kongresi, Şanlıurfa, 29 Mayıs-3 Haziran 1996, sf.586-593
  3. PEKlNER F.O., ŞENTÜRK E., "Yok Büyümesinin Optimum Alçak Gerilim Yeraltı Kablo Kesiti Seçimine Etkisi", Yıldız Teknik Üniversitesi Dergisi, 1996/1
  4. PEKİNER F.O., "A New Approach For Optimum Selection Of Distribution Transformers", I. Mühendislik Ve Fen Bilimlerinde Matematik Ve Bilgisayar Uygulamaları Sempozyumu, c.B.Ü., Manisa, 19-21 Kasım 1996
  5. PEKİNER F.O., "A New Approach To Determine The Optimum Cable Sizes Of The Underground Primary Voltage Feeders", 1. Mühendislik Ve Fen Bilimlerinde:Matematik Ve Bilgisayar Uygulamaları Sempozyumu, C.B.Ü., Manisa, 19-21 Kasım 1996