Journals / Mathematical and Computational Applications / 2009 / Cilt: 14 - Sayı: 2

A graphical user interface for programming stepper motors used at different kinds of applications

Pages
139–146
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It can be, also, considered as a learning aid system for students to get a comprehensive understanding of stepper motors.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Stepper motors are a digital actuator whose input is in the form of programmed energization of the stator windings and whose output is in the form of discrete angular rotation.
📊
Key Findings & Data:By means of this software, stepper motors having up to 8-separate-excitating signal can be programmable and controllable easily.
💡
Conclusion & Impact:It can be, also, considered as a learning aid system for students to get a comprehensive understanding of stepper motors.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Stepper motors are a digital actuator whose input is in the form of programmed energization of the stator windings and whose output is in the form of discrete angular rotation. It is, therefore, ideally suited for use as an actuator in computer control systems, digital control systems and etc. Control systems employing stepper motors as actuators are known as incremental motion control systems. In this study both a GUI and a programming page driven from Matlab program are developed for programming and controlling different types of stepper motors at different drive modes. The parallel port of a PC is used to drive stepper motors. By means of this software, stepper motors having up to 8-separate-excitating signal can be programmable and controllable easily. In the software many different rotational motions are defined as built–in functions. In addition, it provides that the user can define new built-in functions, too. It can be, also, considered as a learning aid system for students to get a comprehensive understanding of stepper motors.

🔖

Cite This Article

ALTINTAŞ, A. (2009). A graphical user interface for programming stepper motors used at different kinds of applications. Mathematical and Computational Applications, Cilt: 14 - Sayı: 2, 139–146. https://ajindex.com/articles/280042

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. T. Kenjo and A. Sugawara, Stepping Motors and Their Microprocessor Controls, 2.ed., Oxford University Press, England, 1994
  2. P. P. Acarnley, Stepping Motors: A Guide to Modern Theory and Practice, 4.ed, IEE Control Engineering Series 63, The Institution of Electrical Engineers, London, 1984
  3. P. Krause and O. Wasynczuk, Electromechanical Motion Devices, McGraw-Hill Pub., New York, 1989
  4. J. Petrovcic, and S. Strmcnik, A microcomputer-based speed controller for lift drives, IEEE Trans. Ind. Appl. 24(3), 487-498, 1988
  5. M. Zribi and J. Chiasson, Position control of a PM stepper motor by exact linearization, IEEE Trans. Automatic Control 36, 620-625, 1991
  6. D.O. Carrica, S.A. Gonzalez, M. Benedetti, A novel algorithm for controlling stepper motors at higher speed, Proc. IMechE Part I:J Systems and Control Engineering 217, 359-365, 2003
  7. D.O. Carrica, S.A. Gonzalez, M. Benedetti, A high speed velocity control algorithm of multiple stepper motors, Elsevier- mechatronics 14, 675-684, 2004
  8. A. Biran and M. Breiner, MATLAB for Engineers, Addison-Wesley Pub., New York, 1995
  9. Matlab, Creating Graphical User Interfaces, Version 7, The Mathworks Inc., Natick/MA, 2006
  10. D.F. Rogers and J.A. Adams, Mathematical Elements for Computer Graphics 2.ed, McGraw-Hill Pub., New York, 1990.