Journals / Mathematical and Computational Applications / 2010 / Cilt: 15 - Sayı: 1

Prediction of head, efficiency, and power characteristics in a semi-open impeller

Pages
137–147
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

To overcome these difficulties, an ANN can be used for prediction of pump performance in semi open impeller.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Artificial Neural Network (ANN) was used to predict the effects of splitter blades in a semi-open impeller on centrifugal pump performance.
📊
Key Findings & Data:Experimental results for lengths of splitter blades in ratio of 1/3, 2/3, and 3/3 of the main blade length were evaluated by different ANN training algorithm.
💡
Conclusion & Impact:To overcome these difficulties, an ANN can be used for prediction of pump performance in semi open impeller.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Artificial Neural Network (ANN) was used to predict the effects of splitter blades in a semi-open impeller on centrifugal pump performance. The characteristics of this impeller were compared with those of impellers without splitter blades. Experimental results for lengths of splitter blades in ratio of 1/3, 2/3, and 3/3 of the main blade length were evaluated by different ANN training algorithm. Training and test data were obtained from experimental studies. The best training algorithm and number of neurons were determined. The values of head, efficiency, and effective power were estimated in a semi-open impeller with splitter blades in ratio of 3/6 and 5/6 of the main blade length at the best efficiency point (b.e.p.). Here, as the splitter blade length increases; the flow rate and power increases, the efficiency decrease. All of the estimated values of performance in a semi-open impeller with splitter blades indicate the model works in line with expectations. Experimental studies to determine head, efficiency and effective power consumption in different types of pumps are complex, time consuming, and costly. It also requires specific measurement tools to obtain the characteristics values of pump. To overcome these difficulties, an ANN can be used for prediction of pump performance in semi open impeller.

🔖

Cite This Article

GÖLCÜ, M., PANCAR, Y., ERGÜR, H. S., GÖRAL, E. Ö. (2010). Prediction of head, efficiency, and power characteristics in a semi-open impeller. Mathematical and Computational Applications, Cilt: 15 - Sayı: 1, 137–147. https://ajindex.com/articles/280026

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (16)

  1. S. Yuan, C. Chen, W. Cao, Design Method of Obtaining Stable Head-Flow Curves of Centrifugal Pumps, ASME, Pumping Machinery, FED154, 171-175, 1993
  2. F. Schweigher and J. Gregori, Design Effects on Performance Characteristics of Centrifugal Pumps, ASME, Applied Mechanics, Biomechanics, Fluid Eng. Conference, Cincinnati, 1-6, 1987
  3. L. D. Kui and J. Jian, Calculation of Complete Three-Dimensional Flow in a Centrifugal Rotor with Splitter Blades, ASME, The Gas Turbine and Aeroengine Congress, Amsterdam, June 6-9, 88-GT-93, 1988
  4. D. Eckardt, Detailed Flow Investigations Within a High-Speed Centrifugal Compressor Impeller, Trans. ASME, J. Fluids Engineering, 98(3),390, 1976
  5. T.Z. Farge, M.W. Johnson, T.M.A. Maksoud, Tip Leakage in a Centrifugal Impeller, Trans. ASME, J. Turbomachinery,111(3),244, 1989
  6. H. Miyamoto, Y. Nakashima, Y. Yasunaga, K. Shiramoto, Study on Flow of Centrifugal Impeller (1st Report, Flow Measurement in Unshrouded Impeller Passage), Trans. Jpn. Soc. Mech. Eng., (in Japanese), 55,(512), B, 1137, 1989a
  7. H. Miyamoto, Y. Nakashima, Y. Yasunaga, K. Shiramoto, Study on Flow of Centrifugal Impeller (2nd Report, Flow Measurement in Shrouded Impeller Passage), Trans. Japan. Soc. Mech. Eng., (in Japanese), 55, (518), B, 3108, 1989b
  8. C. Pfleiderer, Die kreiselpumpen für Flüssigkeiten und gase, Springer Verlag, Berlin, 1961
  9. A.J. Stepanoff, Centrifugal and Axial Flow Pumps, John Wiley Sons Inc., Newyork, 1967
  10. P.O. Black, Pumps, Theodore Audel Co., Indiana, 1975
  11. E. Ö. Göral, Effect of Splitter Blades on Pump Performance in Semi Open Impellers, Master Thesis in Mechanical Engineering, Graduate School of Natural and Applied Sciences, Osmangazi University, 2000
  12. K.K. Singh, K.T. Shenoy, A.K. Mahendra, S.K. Ghosh, Artificial neural network based modelling of head and power characteristics of pump-mixer, Chemical Engineering Science, 59:2937-2945, 2004
  13. D.R. Parisi and M.A. Laborde, Modelling steady-state heterogeneous gas–solid reactors using feedforward neural networks, Computers and Chemical Engineering, 25, 1241, 2001
  14. R. Sharma, D. Singhal, R. Ghosh, A. Dwivedi, Potential application of artificial neural networks to thermodynamics: vapour–liquid equilibrium prediction, Computers and Chemical Engineering, 23,385-390, 1999
  15. R. Altissimi, A. Brambilla, A. Deidda, D. Semino, Optimal operation of a separation plant using ANN, Computers and Chemical Engineering, 22 (Suppl. 1), S939, 1998
  16. A. Sozen, E. Arc