Journals / Mathematical and Computational Applications / 2007 / Cilt: 12 - Sayı: 1

A new method for extracting 3D solid models of objects using 2D technical drawings

Pages
31–39
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results show that in most of the cases the algorithm works as expected.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, a new method called “3D-Space” have been developed to obtain 3D models of prismatic machine parts using 2D technical drawings.
📊
Key Findings & Data:The algorithm basicaly works in the following manner: 3 basic views (i.e. top, front, left side) of an object are supplied as inputs while the output is a 3D solid view of corresponding object.
💡
Conclusion & Impact:The results show that in most of the cases the algorithm works as expected.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, a new method called “3D-Space” have been developed to obtain 3D models of prismatic machine parts using 2D technical drawings. The algorithm basicaly works in the following manner: 3 basic views (i.e. top, front, left side) of an object are supplied as inputs while the output is a 3D solid view of corresponding object. To start with a raw bounding box spatially big enough to contain the complete final object is taken. Following the operations executed on it, the result is the 3D solid view of the 2D drawings. The basic views of the object are used to determine the nature of the operation to be applied on the raw entity. A feedback mechanism is also incorporated into the system to check the correctness of the final product. The results show that in most of the cases the algorithm works as expected. However there are some restrictions which are given in the text.

🔖

Cite This Article

ÇAYIROĞLU, İ., ÇAVUŞOĞLU, A., ÇELİK, V. (2007). A new method for extracting 3D solid models of objects using 2D technical drawings. Mathematical and Computational Applications, Cilt: 12 - Sayı: 1, 31–39. https://ajindex.com/articles/279985

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. M. Idesawa, A system to generate a solid figure from a three view, Bull. of the Japon Soc. of Mech. Engng., 16, 216-225, 1973
  2. G. Lafue, Recognition of three-dimensional objects from orthographic views, Computer Grahics, Interactive Techniques and Image Processing, ACM/SIGGRAPH, 103-108, July 1976
  3. G. Markowsky and M.A. Wesley, Fleshing out wire frames. IBM J. of Res. & Develop. 24, 582-597, 1980
  4. B. Aldefeld, On automatic recognition of 3D structures from 2D representations,Computer-Aided Design, 15, 59-64, 1983
  5. H. Sakurai, Gossard D.C. Solid model input through orthographic views, Computer Graphics, 17, 243-252, 1983
  6. H. Bin, Inputting constructive solid geometry representations directly from 2D orthographic engineering drawings. Computer-Aided Design, 18, 147-155, 1986
  7. R. Lequette, Automatic construction of curvilinear solids from wireframe views.Computer-Aided Design, 20, 171-180, 1988
  8. H. Masuda and M. Numao, A cell-based approach for generating solid objects from orthographic projections, Computer-Aided Design, 29, 177-187, 1997
  9. S.S.P. Shum, W.S. Lau, M.M.F. Yuen and K.M. Yu, Solid reconstruction from orthographic opaque views using incremental extrusion, Comput. & Graphics., 21, 787-800, 1997
  10. B.S. Shin and Y.G. Shin, Fast 3D solid model reconstruction from orthographic views, Computer-Aided Design, 30, 63-76, 1998.