Journals / Mathematical and Computational Applications / 2011 / Cilt: 16 - Sayı: 1

Investigation of coating layer to reduce thermal stresses in steel fiber reinforced aluminum metal matrix composite

Pages
226–235
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results have been presented in graphics.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, by using coating layers to reduce thermal stresses in the metal matrix composites with a mismatch in coefficients of thermal expansions of fiber and matrix is investigated.
📊
Key Findings & Data:In this solution, 224 nodes and 44 nine-node isoparametric elements are used.
💡
Conclusion & Impact:The results have been presented in graphics.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, by using coating layers to reduce thermal stresses in the metal matrix composites with a mismatch in coefficients of thermal expansions of fiber and matrix is investigated. The thermoelastic solutions based on a three cylinder model are deformed. It is shown that the effectiveness of the layer can be defined by the product of its cofficients of thermal expansions and thickness and that a compensating layer with a sufficiently high coefficient of thermal expansions can reduce the thermal stresses in the metal matrix. . In order to verify the results were compared with the finite element method. In this solution, 224 nodes and 44 nine-node isoparametric elements are used. The study is based on a three cylinder model isolating one steel fiber with a coating layer and a aluminum matrix layer. Only monotonic cooling is studied and the variation of the material properties with temperatures is not considered. The results have been presented in graphics.

Özet

Türkçe Öz Yok

🔖

Cite This Article

OKUMUŞ, F. (2011). Investigation of coating layer to reduce thermal stresses in steel fiber reinforced aluminum metal matrix composite. Mathematical and Computational Applications, Cilt: 16 - Sayı: 1, 226–235. https://ajindex.com/articles/279928

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. Ghosn, L.J. and A. L. Bradley. Optimum Interface Properties for Metal Matrix Composites,NASA TM-1022985, 1989. 2.Doghri, I. and F.A. Leckie. Elasto-Plastic Analysis of Interface Layers for Fiber Reinforced Metal Matrix Composites, Composites Science and Technology, 1993. 3.Caruso, J.J., C.C. Chamis and H.C. Brown. Parametric Studies to Determine the Effects of Compliant Layers on Metal Matrix Composite Systems, NASA TM-102465,1990. 4.Jansson, S. and F.A. Leckie. Reduction of Thermal Stresses in Continuous Fiber Reinforced Metal Matrix Composites with Interface Layers, Journal of Composite Materials, 26 (10): 1474-1486,1992. 5.Okumuş, F. Influence of coating layer to reduce thermal stresses in cylindirically formed metal matrix composites, ASME 14th Reliability Stress Analysis and Failure Prevention Conference, Vol.5,121-128, 2000. 6.Doghri, I. and Jansson, S. and Leckie, A. and Lemaitre, J. Optimization of Coating Layers In the Design of Ceramic Fiber Reinforced Metal Matrix Composites, Journal of Composite Materials, 28 (2): 167-18J, 1994.