Journals / Mathematical and Computational Applications / 2011 / Cilt: 16 - Sayı: 2

Evaluation of optimal sensor placement techniques for parameter identification in buildings

Pages
456–466
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The overall results show that the SSE Technique is the best.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This paper addresses the application of six different optimal sensor placement (OSP) techniques in buildings.
📊
Key Findings & Data:Mozst importantly, while the sensor distribution estimated by other techniques is mainly concentrated in a certain storey of the building, SSE gives a homogeneous sensor distribution throughout the building.
💡
Conclusion & Impact:The overall results show that the SSE Technique is the best.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

This paper addresses the application of six different optimal sensor placement (OSP) techniques in buildings. These techniques are the EFfective Independence (EFI), Optimal Driving Point (ODP), Non-Optimal Driving Point (NODP), Effective Independence Driving Point Residue (EFI-DPR), Singular Value Decomposition (SVD) and the Sensor Set Expansion (SSE) methods. A toolbox OPTISEP is developed by the author for this purpose within the context of this paper. The techniques are compared among themselves by using various criteria. The overall results show that the SSE Technique is the best. First, the technique results in a dramatic reduction in the computational effort. Second, it allows a civil engineer to specify a set of locations that they absolutely want to keep in the final sensor configuration. Mozst importantly, while the sensor distribution estimated by other techniques is mainly concentrated in a certain storey of the building, SSE gives a homogeneous sensor distribution throughout the building. Finally, it is shown that the technique i s also robust against noise in the measurements.

🔖

Cite This Article

BAKIR, P. G. (2011). Evaluation of optimal sensor placement techniques for parameter identification in buildings. Mathematical and Computational Applications, Cilt: 16 - Sayı: 2, 456–466. https://ajindex.com/articles/279917

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. Kammer D.C. Sensor placement for on-orbit modal identification and correlation of large space structures. Journal of Guidance Control and Dynamics, 14(2):251-59, 1991. 2. Kammer D.C. and Jensen B.M. and Mason D.R. Test-analysis correlation of the space shuttle solid rocket motor center segment. Journal of Spacecraft and Rockets, 26(4):266-73, 1989. 3. Kincaid R.K. and Padula S.L. D-optimal designs for sensor and actuator locations. Computers and Operations Research, 29(6):701-13, 2002. 4. Naimimohasses DM, Barnet DM and Smith PR. Sensor optimization using neural network sensitivity measures. Measurement Science and Technology, 6:1291-300, 1995. 5. Oh DY and No HC. Determination of the minimal number and optimal sensor location in a nuclear system with fixed incore detectors. Nuclear Engineering and Design, 152:197-212, 1994. 6. Meo M and Zumpano G. On the optimal sensor placement techniques for a bridge structure. Engineering Structures, 27:1488-97, 2005. 7. Li DS and Li HN and Fritzen CP. The connection between effective independence and modal kinetic energy methods for sensor placement. Journal of Sound and Vibration, 305:945-955, 2007. 8. Celep Z. and Kumbasar N. Earthquake engineering and earthquake resistant design of structures (in Turkish). Beta Publishing, Turkey, 2004. 9. Celep. Z. Reinforced Concrete Structures (in Turkish). Beta Publishing, Turkey, 2009. 10. The language of technical computing MATLAB. Available at: http://www.mathworks.com, version 7.10.246, release 14.0, the mathworks. 2005. 11. Imamovic N. Model validation of large finite element model using test data. PhD thesis, Imperial College, London, UK, 1998. 12. Doebling SW. Measurement of structural flexibility matrices for experiments with incomplete reciprocity. PhD thesis, Colorado University, http://sdel.colorado.edu/Publications/1995/Theses/Doebling-PhD.pdf, USA, 1996. 13. Kim H.B. and Park Y.S. Sensor placement guide for structural joint stiffness model improvement. Mechanical System and Signal Processing, 11(5):651-72, 1997. 14. Kammer DC. Sensor set expansion for modal vibration testing. Mechanical systems and signal processing, 19(4):700-716, 2005. 15. Kammer D.C. and Tinker M.L. Optimal placement of triaxial accelerometers for modal vibration tests. Mechanical Systems and Signal Processing, 18:29-41, 2004. 16. Middleton D. An introduction to statistical communication theory. McGraw-Hill, New York, USA, 1960. 17. Allemang R. J. and Brown D. L. A correlation coefficient for