Journals / Mathematical and Computational Applications / 2011 / Cilt: 16 - Sayı: 2

The prediction of swell percent and swell pressure by using neural networks

Pages
425–436
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It has been demonstrated that the ANN models can be used satisfactorily to predict swell percent and swell pressure as a rapid inexpensive substitute for laboratory techniques.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Expansive soils exhibit significantly high volumetric deformations and so pose a serious threat to stability of the structures and foundations.
📊
Key Findings & Data:Two different ANN (ANN-1 and ANN-2) and MRA (MRA-1 and MRA-2) models have been developed: ANN-1 and MRA-1 models for predicting swell percent and ANN-2 and MRA-2 models for predicting swell pressure.
💡
Conclusion & Impact:It has been demonstrated that the ANN models can be used satisfactorily to predict swell percent and swell pressure as a rapid inexpensive substitute for laboratory techniques.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Expansive soils exhibit significantly high volumetric deformations and so pose a serious threat to stability of the structures and foundations. Thus, determination of their swelling properties (i.e. swelling potential and swell pressure) becomes essential. However, measurement of the swelling properties is time-consuming and requires special and expensive equipment. With this in view, efforts were made to develop artificial neural network (ANN) and multiple regression analysis (MRA) models that can be employed for estimating swell percent and swell pressure. To achieve this, the results of free swell tests performed on statically compacted specimens of Kaolinite-Bentonite clay mixtures with varying soil properties were used. Two different ANN (ANN-1 and ANN-2) and MRA (MRA-1 and MRA-2) models have been developed: ANN-1 and MRA-1 models for predicting swell percent and ANN-2 and MRA-2 models for predicting swell pressure. The results obtained from ANN and MRA models were compared vis-à-vis those obtained from the experiments. The values predicted from the ANN models match the experimental values much better than those obtained from MRA models. Moreover, several performance indices such as determination coefficient ($R^ 2$), variance account for (VAF), mean absolute error (MAE), and root mean square error (RMSE) were calculated to check the prediction capacity of the ANN and MRA models developed. The obtained indices make it clear that the constructed ANN models have shown higher prediction performance than MRA models. It has been demonstrated that the ANN models can be used satisfactorily to predict swell percent and swell pressure as a rapid inexpensive substitute for laboratory techniques.

🔖

Cite This Article

ERZİN, Y., GÜNEŞ, N. (2011). The prediction of swell percent and swell pressure by using neural networks. Mathematical and Computational Applications, Cilt: 16 - Sayı: 2, 425–436. https://ajindex.com/articles/279916

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (17)

  1. A. Dhowian, A. O. Erol and Y. Abdulfattah, Evaluation of expansive soils and foundation methodology in the kingdom of Saudi Arabia, King Abdulaziz City for Science and Technology, Riyad, 1998
  2. M. A. El-Sohby, and A. R. El-Sayed, Some factors affecting swelling of clayey soils, Geotechnical Engineering 12, 19-39, 1981
  3. M. A. El-Sohby, and A. R. El-Sayed, Mineralogy and swelling of expansive clayey soils, Geotechnical Engineering 14, 79-87, 1981
  4. A. Komornik and D. David, Prediction of swelling pressure of clays, Journal of Soil Mechanics AND Foundation Engineering Division, ASCE 95(1), 209-225, 1969
  5. S. Azam and S.N. Abduljauwad, Influence of gypsification on engineering behavior of expansive clay, Journal of Geotechnical and Geoenvironmental Enginneering 126 (6), 538-542, 2000
  6. Y. Erzin, and O. Erol, Correlations for quick prediction of swell pressures, The Electronic Journal of Geotechnical Engineering 9-Bundle F, 2004
  7. V.K.S. Thakur and D.N. Singh, Rapid determination of swelling pressure of clay minerals, Journal of Testing and Evaluation, ASTM 33 (4), 1-7, 2005
  8. M. A. Shahin, M. B. Jaksa and H.R. Maier, Artificial neural network applications in geotechnical engineering, Australian Geomechanics 36(1), 49-62, 2001
  9. N. Güneş, Determination of swell pressure under load, MSci. Thesis, Celal Bayar University, Manisa, 2009 (in Turkish)
  10. M. Banimahd, S. S. Yasrobi, and P. Woodward, Artificial neural network for stressstrain behavior of sandy soils: Knowledge based verification, Computers and Geotechniques 32, 377-386, 2005
  11. J. M. Zurada, Introduction to artificial neural systems, West, St. Paul, Minn, 1992
  12. L. V. Fausett, Fundamentals of neural networks: Architecture, algorithms, and applications, Prentice-Hall, Englewood Cliffs, N.J., 1994
  13. R. Hecht-Nielsen, Neurocomputing, Addison-Wesley, Boston, 1990
  14. A. Maren, C. Harston and R. Pap, Handbook of neural computing applications, Academic press, San Diego, California, 1990
  15. P. Orbanić and M. Fajdiga, A neural network approach to describing the fretting fatigue in aluminum-steel couplings, International Journal of Fatigue 25, 201-07, 2003
  16. I. Kaastra and M. Boyd, Designing a neural network for forecasting financial and economic time series, Neurocomputing 10 (3), 215-236, 1996
  17. M. A. Grima, R. Babuska, Fuzzy model for the prediction of unconfined compressive strength of rock samples. International Journal of Rock Mechanics and Mining 36, 339-49, 1999. 18