SavedAdd your journal

Journals / Mathematical and Computational Applications / 2011 / Cilt: 16 - Sayı: 2

Experimental and comparative study of different fibers on the strength and failure of quasi-isotropic plastic composite with a hole

Fuat OKUMUŞ
Pages
404–413
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

And also three different types of reinforcing material (steel, aluminum and Eglass) were employed.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In the present study, the effects of different types of fibers on the strength and failure Mechanism of quasi-isotropic silicon carbide/epoxy composite laminate with reinforced hole has been carried out experimentally.
📊
Key Findings & Data:Composite plate is meshed into 64 elements and 288 nodes with simply supported and in-plane loading conditions.
💡
Conclusion & Impact:And also three different types of reinforcing material (steel, aluminum and Eglass) were employed.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In the present study, the effects of different types of fibers on the strength and failure Mechanism of quasi-isotropic silicon carbide/epoxy composite laminate with reinforced hole has been carried out experimentally. The composite panels under compression loadings have been investigated In order to verify the experimental results were compared with the finite element method. A rectangular element with nine nodes has been chosen. Composite plate is meshed into 64 elements and 288 nodes with simply supported and in-plane loading conditions. Two types of reinforcement boundary conditions were investigated; adhesive bonded and snug-fit unbounded plug. For each case, five different sizes of hole diameter were used. And also three different types of reinforcing material (steel, aluminum and Eglass) were employed.

🔖

Cite This Article

OKUMUŞ, F. (2011). Experimental and comparative study of different fibers on the strength and failure of quasi-isotropic plastic composite with a hole. Mathematical and Computational Applications, Cilt: 16 - Sayı: 2, 404–413. https://ajindex.com/articles/279896

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. L.H. Kocher and S.L.Cross, Reinforced Cutouts in Graphite composite Structure, Composite Materials (2 nd Conference), ASTM STP 497, pp.382-389,1972
  2. S.C.Tan and S.W.T, Notched Strength, Composites Design, 3 rd Edition,1987
  3. D.H.Pickett and P.D. Sullivan, Analysis of Symmetrical Reinforcement of Quasi- Isotropic Gr/Ep Plates with a Circular Cutout under Uniaxial Tension Loading. MS Thesis, NPGS, Monterey, CA,1983
  4. J.H.Lee and S.Mall, Experimental Investigation of Quasi-Isotropic Graphite/Epoxy Laminate with a Reinforced Hole. Composite Materials, 45:384- 391,1992
  5. G.Jeronimidis and A.T. Parkyn, Residual Stress in Carbon Fiber-Thermoplastic Matrix Laminates. Journal of Composite Materials; 22-5: 401-15,1998
  6. Bahei-El-Din YA, GJ. Dvorak, Plasticity Analysis of Laminated Composite Plates. Transactions of the ASME; 49: 740-6,1982
  7. R. Karakuzu, and O. Sayman, Elasto-plastic finite element analysis of orthotropic rotating Discs with holes, Computers and Structures; 51: 695-703,1994
  8. R. Karakuzu, and A. Özel and O. Sayman, Elasto-Plastic Finite Element Analysis of Metal Matrix Plates with Edge Notches. Composite Structures; 63: 551- 8,1997
  9. S. Canumalla and SA.Dynan, Mechanical Behaviour of Fiber Reinforced Aluminum Alloy Composites. Journal of Composite Materials; 29: 653-69,1995
  10. TW. Chou and A. Kelly and A. Okura, Fiber-Reinforced Metal-Matrix Composites, Journal of Composite Materials; 16:187-206,1985.