Journals / Mathematical and Computational Applications / 2011 / Cilt: 16 - Sayı: 3

A comparative evaluation of performance based analysis procedures

Pages
605–616
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Furthermore non-linear procedure results are compared between 2007TEC and FEMA-440 Capacity-Spectrum Method (CSM) and Displacement- Coefficient Method (DCM)

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Chapter 7 of the 2007 Turkish Earthquake Code (TEC) entitled “Assessment and Strengthening of Existing Buildings” sets standards for assessment and rehabilitation of existing buildings.
📊
Key Findings & Data:Linear elastic and non-linear evaluation procedures of 2007 TEC are applied to reinforced concrete buildings. 2007 TEC gives two methods for assessment and rehabilitation of existing buildings.
💡
Conclusion & Impact:Furthermore non-linear procedure results are compared between 2007TEC and FEMA-440 Capacity-Spectrum Method (CSM) and Displacement- Coefficient Method (DCM)
🔬Design:Research Article
📍Scope:2007 Verileri
⚙️Variables:Domain Parameters

Abstract

Chapter 7 of the 2007 Turkish Earthquake Code (TEC) entitled “Assessment and Strengthening of Existing Buildings” sets standards for assessment and rehabilitation of existing buildings. Linear elastic and non-linear evaluation procedures of 2007 TEC are applied to reinforced concrete buildings. 2007 TEC gives two methods for assessment and rehabilitation of existing buildings. Linear elastic and non-linear static evaluation procedures are proposed for structural evaluation. A performance-based evaluation methodology is used under three levels of earthquake ground motion intensities with different return periods. The performance acceptance criteria are based on demand to capacity ratios at critical sections for the linear evaluation procedures (equivalent seismic load method and mode superposition method) and material strains for the non-linear evaluation procedures (the non-linear static pushover analysis). Member performance limits are described for three damage levels, considering the anticipated failure mode and ductility capacity of each member. Structural performance is then calculated by accounting for the distribution of member damages over the building.. Consistency between the results of the methods used for seismic evaluation of existing buildings is of prime importance. For this purpose, an irregular structure of in plane (A3 type) and 3 story is considered. The target performance level of the building is obtained by applying the linear and the non-linear evaluation procedures. The results are given comparatively on the target performance level of the building. Furthermore non-linear procedure results are compared between 2007TEC and FEMA-440 Capacity-Spectrum Method (CSM) and Displacement- Coefficient Method (DCM)

🔖

Cite This Article

ERDEM, R., BAĞCI, M., DEMİR, A. (2011). A comparative evaluation of performance based analysis procedures. Mathematical and Computational Applications, Cilt: 16 - Sayı: 3, 605–616. https://ajindex.com/articles/279891

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. TEC 2007, Specifications for buildings to be built in seismic areas. Turkish Earthquake Code 2007). Ministry of Public Works and Settlement. Ankara. (Turkey) [in Turkish]
  2. ATC-40 (1996), Seismic evaluation and retrofit of concrete buildings vols. 1–2. California. Applied Technology Council
  3. FEMA-356 (2000), Prestandard and commentary for seismic rehabilitation of buildings. Federal Emergency Management Agency, Washington (DC)
  4. FEMA-440, 2004. Improvement of Nonlinear Static Seismic Analysis Procedures, Washington (DC)
  5. SAP2000. Integrated finite element analysis and design of structures basic analysis reference manual, Computers and Structures Inc. Berkeley (CA, USA)
  6. TS500 (2000), Requirements for design and construction of reinforced concrete structures. Turkish Standards Institute (2000). Ankara. (Turkey)
  7. Sezer, F., Gençoğlu, M. and Celep Z,.(2007), A Comparative Study of Seismic Safety Evaluation of Concrete Buildings According to Turkish Seismic Code (2007), Sixth National Conference on Earthquake Engineering, 16-20 October
  8. Uygun, G. and Celep, Z. (2007), A Comparative Study of Seismic Safety Evaluation of a Concrete Building According to The Linear and The Non􀀎linear Methods of Turkish Seismic Code (2007), Sixth National Conference on Earthquake Engineering, 16-20 October
  9. Tuncer, O., Celep, Z., Yılmaz, M.B., A Comparative evaluation of the methods given in the Turkish Seismic Code (2007), WCCE – ECCE – TCCE Joint Conference: EARTHQUAKE & TSUNAMI
  10. Duzce, Z. (2006), Performance evaluation of existing medium rise reinforced concrete buildings according to 2006 Turkish Seismic Rehabilitation Code, Master Thesis, Department of Civil Engineering, METU, Ankara
  11. Fajfar, P. and Fischinger, M. (1988), N2 - a method for non-linear seismic analysis of regular RC buildings, Proc. 9thWorld Conference in Earthquake Engineering, Tokyo-Kyoto, Vol. V, 111-116 12. Fardis, M.N. (2003), Seismic assessment and retrofitting of existing buildings according to Eurocode 8, Fifth national conference on earthquake engineering, 26- 30 may 2003, Istanbul Turkey
  12. Kappos, A.J. and Panagopoulos, G. (2004), Performance-based seismic design of 3D RC buildings using inelastic static and dynamic analysis procedures, ISET Journal of Earthquake Technology. 41(1), 141-158 14. Lam, N.T.K., Gaull, B.A and Wilson J.L. (2007), Calculation of earthquake actions on building structures in Australia, EJSE Special Issue: Loading on Structures, 22- 40. 15.