Journals / Mathematical and Computational Applications / 2013 / Cilt: 18 - Sayı: 3

NUMERICAL INVESTIGATION OF IMPINGING JETS WITH NANOFLUIDS ON A MOVING PLATE

Pages
428–437
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In the unsteady case, heat transfer enhancement is seen at low frequencies.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study a numerical investigation of an impinging jet flow, on a heated moving plate, is presented.
📊
Key Findings & Data:It is observed that adding nanoparticles increases the peak value of Nusselt number.
💡
Conclusion & Impact:In the unsteady case, heat transfer enhancement is seen at low frequencies.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study a numerical investigation of an impinging jet flow, on a heated moving plate, is presented. The purpose of this study is to numerically investigate the effects of various parameters such as nanoparticle volume fraction, pulsating frequency, plate velocity, Reynolds number on the heat transfer characteristics. Navier-Stokes equations and energy equations are solved with a commercial finite volume based code. It is observed that adding nanoparticles increases the peak value of Nusselt number. It is also observed that the value of Nusselt number at the stagnation point is higher at the low velocities of impingement surface. In the unsteady case, heat transfer enhancement is seen at low frequencies.

🔖

Cite This Article

ERSAYIN, E., SELİMEFENDİGİL, F. (2013). NUMERICAL INVESTIGATION OF IMPINGING JETS WITH NANOFLUIDS ON A MOVING PLATE. Mathematical and Computational Applications, Cilt: 18 - Sayı: 3, 428–437. https://ajindex.com/articles/279828

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Y. C. Chen, C. F Ma, M. Qin and Y. X Li, Theoretical study on impingement heat transfer with single-phase free-surface slot jets, International Journal of Heat and Mass Transfer 48, 3381-3386, 2005
  2. M. Sharif and A. Banerjee, Numerical analysis of heat transfer due to confined slotjet impingement on a moving plate, Applied Thermal Engineering 29, 532-540, 2009
  3. D. Zumbrunnen, P. Incropera and R. Viskanta, A laminar boundary layer model of heat transfer due to a nonuniform planar jet impinging on a moving plate, Warme-und Stofffibertragung 27, 311-319, 1992
  4. K. Ibuki, T. Umeda, H. Fujimoto and H. Takuda, Heat transfer characteristics of a planar water jet impinging normally or obliquely on a flat surface at relatively low Reynolds numbers, Experimental Thermal and Fluid Science 33, 1226-1234, 2009
  5. F. T. Dórea and M. de Lemos, Simulation of laminar impinging jet on a porous medium with a thermal non-equilibrium model, International Journal of Heat and Mass Transfer 53, 5089-5101, 2010
  6. Y. T. Yang, T. C. Wei and Y. H. Wang, Numerical study of turbulent slot jet impingement cooling on a semi-circular concave, International Journal of Heat and Mass Transfer 54, 482-489, 2011
  7. P. Naphon and S. Wongwises, Investigation on the jet liquid impingement heat transfer for the central processing unit of personal computers, International Communications in Heat and Mass Transfer 37, 822-826, 2010
  8. S. Choi, Enhancing thermal conductivity of fluids with nanoparticles, developments and applications of non-Newtonian flows, ASME FED 231, 99-105, 1995
  9. G. Roy, C. T. Nguyen and P. Lajoie, Numerical investigation of laminar flow and heat transfer in a radial flow cooling system with the use of nanofluids, Superlattices and Microstructures 35, 497-511, 2004.10. G. Roy, C. T Nguyen and M. Comeau, Numerical investigation of electronic component cooling enhancement using nanofluids in a radial flow cooling system, Journal of Enhanced Heat Transfer 13, 101-115, 2006
  10. O. Manca, P. Mesolella, S. Nardini and D. Ricci, Numerical study of a confined slot impinging jet with nanofluids, Nanoscale Research Letters 6, 188, 2011
  11. Q. Li, Y. Xuan, F. Yu, Experimental investigation of submerged single jet impingement using Cu-water nanofluid, Applied Thermal Engineering 36, 426-433, 2012
  12. G. Di Lorenzo, O. Manca, S. Nardini and D. Ricci, Numerical study of laminar confined impinging slot jets with nanofluids, Advances in Mechanical Engineering 2012 14. C. T.