Journals / Megaron / 2019 / Cilt: 14 - Sayı: 4

A Design-Decision Making Model for Detail Design of Building Elements

Yapı Elemanlarının Detay Tasarımı İçin Bir Tasarım-Karar Verme Modeli

Journal
Megaron
Pages
623–648
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Automating the model and integrating it with BIM systems will eliminate the process length and time loss, enabling more efficient use of the model.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, it is aimed to develop a design-decision making model which helps the building element detail designers to create design alternatives according to the design factors and determine the most appropriate solution by evaluating the alternatives.
📊
Key Findings & Data:In the development of the model, the general design-decision-making process phases (analysis-synthesis-evaluation) adopted by various theorists looking at design in terms of system approach were followed as a method.
💡
Conclusion & Impact:Automating the model and integrating it with BIM systems will eliminate the process length and time loss, enabling more efficient use of the model.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, it is aimed to develop a design-decision making model which helps the building element detail designers to create design alternatives according to the design factors and determine the most appropriate solution by evaluating the alternatives. In the development of the model, the general design-decision-making process phases (analysis-synthesis-evaluation) adopted by various theorists looking at design in terms of system approach were followed as a method. In the analysis phase, the preliminary information obtained from the previous design phases is analyzed and design factors that can affect the detail design are determined. In the synthesis phase, alternative detail design solutions are developed according to the design factors and the relations between them. Thus, feasible detail design alternatives that can meet the design objectives of the building element can be obtained. In the evaluation phase, by using an appropriate evaluation method, feasible alternatives are evaluated according to design factors and the most suitable detail design alternatives are selected. The developed design-decision-making model allows designers to use his intuitive power and creativity during the creation of a detail design alternative and simplifies the understanding and control of decisions both in the creation of alternatives and in the evaluation process. Automating the model and integrating it with BIM systems will eliminate the process length and time loss, enabling more efficient use of the model.

Özet

Bu çalışmada, yapı elemanı detay tasarımcılarının, tasarım etmenlerine göre sistemli biçimde tasarım alternatifleri oluşturmasına ve alternatifleri değerlendirerek en uygun çözümü belirlemesine yardımcı olacak bir tasarım-karar verme modelinin geliştirilmesi amaçlanmıştır. Modelin geliştirilmesinde, tasarıma sistem yaklaşımı açısından bakan çeşitli kuramcılar tarafından kabul edilen, genel tasarım-karar verme süreci evreleri (analiz-sentez-değerlendirme) yöntem olarak izlenmiştir. Analiz evresinde, daha önceki tasarım evrelerinden elde edilen ön bilgiler analiz edilerek, detay tasarımını etkileyebilecek tasarım etmenleri belirlenir. Sentez evresinde, tasarım etmenlerine ve aralarındaki ilişkilere göre alternatif detay tasarım çözümleri geliştirilmeye çalışılır. Böylece, yapı elemanının tasarım amaçlarını karşılayabilecek olası detay tasarım alternatifleri elde edilebilir. Değerlendirme evresinde, oluşturulan olası alternatifler, uygun bir değerlendirme yöntemi kullanılarak ve tasarım etmenlerine göre değerlendirilerek en uygun detay tasarım alternatifleri seçilir. Geliştirilen tasarım-karar verme modeli, detay tasarım alternatifi oluşturma evresinde tasarımcılara sezgisel gücünü ve yaratıcılığını kullanma olanağı tanır ve hem alternatifleri oluşturma hem de değerlendirme sürecinde kararların anlaşılmasında ve denetlenmesinde kolaylık sağlar. Modelin otomatikleştirilmesi ve BIM sistemleriyle bütünleştirilmesi, işlem uzunluğunu ve zaman kaybını ortadan kaldırarak, modelin daha etkin kullanımına olanak sağlayacaktır.

🔖

Cite This Article

DENİZ, Ö. Ş. (2019). A Design-Decision Making Model for Detail Design of Building Elements. Megaron, Cilt: 14 - Sayı: 4, 623–648. https://ajindex.com/articles/276492

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (2)

  1. AfsariK.andEastman,C.(2016)“AComparisonofConstruction ClassificationSystemsUsedforClassifyingBuildingProduct Models”,Proceedingsof52ndAnnualInternationalConferenceoftheAssociatedSchoolsofConstruction.Provo,Utah, April13-16,2016. Akçalı,Ü.(1983)AktarmasızAnalizlerle1983YılıİnşaatBirimMaliyetleri,TÜBİTAKYAE,Ankara. Alibaba,H.Z.andÖzdeniz,M.B.(2004)“ABuildingElements SelectionSystemforArchitects”,BuildingandEnvironment, 39:3,pp.307-316. Allen,E.andRand,P.(2016)ArchitecturalDetailing:Function, Constructability,Aesthetics,JohnWiley,NewYork. Altun,M.C.,Türkay,I.,Koyaz,M.(2015)“ADesignSupportTool forBuildingEnvelope’sTypicalAreaDetails”,VII.InternationalCongressonArchitecturalEnvelopes,SanSebastian-Donostia,Spain,pp.229-236. AygünM.(Yürütücü),Çetiner,İ.,Göçer,C.(1999)“YapıElemanlarındaSeçenekÜretimiveDeğerlendirilmesi”,TÜBİTAKProje No:İNTAG108,Ankara. Balanlı,A.(1997)YapıdaÜrünSeçimi,YıldızÜniversitesiMimarlıkFakültesiEğitimveKültürHizmetleriDerneğiYayını.No:4. İstanbul. Bayazıt,N.(1994)EndüstriÜrünlerindeveMimarlıktaTasarlama MetotlarınaGiriş,LiteratürYayını,İstanbul.
  2. BSI(1993)BS-7642:1993:PerformanceStandardsinBuildingContentsandFormatofStandardsforEvaluationofPerformance,BritishStandardsInstitution. BSI(2016)BS-1192:2007+A2:2016:CollaborativeProductionof Architectural,EngineeringandConstructionInformationCodeofPractice,BritishStandardsInstitution. Cross,N.(2008)EngineeringDesignMethods:StrategiesforProductDesign,JohnWileyandSons,NewYork. CSI(2004)TheProjectResourceManual:CSIManualofPractice, 5thEdition,McGraw-HillEducation. CSI(2016)UniFormat,ConstructionSpecificationsInstitute,USA. CSI(2018)MasterFormat,ConstructionSpecificationsInstitute, USA. Deniz,Ö.Ş.andEkinci,S.(2016)“ADecision-MakingProcessfor SelectingBuildingEnvelopeAssemblies”,JournalofAsian ArchitectureandBuildingEngineering,15:3,pp.549-555. Deniz,Ö.Ş.(2011)“BinaÇevreleyiciSistemi”,YalıtımDergisi, Sayı.90,sf.60-68;Sayı.91,sf.56-60. Edis,F.E.(2007)“MimariYapısalÖğelerinTasarımıİçinBirYöntem”,DoktoraTezi,İstanbulTeknikÜniversitesi,FenBilimleri Enstitüsü. Emmitt,S.(2002)ArchitecturalTechnology,BlackwellScience Ltd.,Oxford. Emmitt,S.,Olie,J.,Schmid,P.(2004)PrinciplesofArchitectural Detailing,BlackwellPublishing,Oxford. Ginevicius,R.,Podvezko,V.,Raslanas,S.(2008)“Evaluatingthe alternativesolutionsofwallinsulationbymulticriteriamethods”,JournalofCivilEngineeringandManagement,14:4, pp.217-226. Gray,C.andHughes,W.(2001)BuildingDesignManagement, Butterworth-Heinemann,Oxford. Hwang,C.L.andYoon,K.(1981)Multipl