Journals / İşletme Araştırmaları Dergisi / 2018 / Cilt: 10 - Sayı: 4

Application of Activity Based Costing in Reverse Logistics Environment: A Case of End-of-life Vehicle Recovery in Turkey

Pages
953–973
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Results show that while most cost of the company (52.7%) was related with the output of B Group of components/parts (sent to shredders); the minimum cost (12.3%) was realized for the output of A Group components/parts (sent to recyclers).

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Nowadays, there has been a growing interest in reverse logistics in both theory and practice due to legislations, economic and ecological benefits, and social responsibilities.
📊
Key Findings & Data:Traditional accounting methods are inadequate for accurate assignment of overhead costs.
💡
Conclusion & Impact:Results show that while most cost of the company (52.7%) was related with the output of B Group of components/parts (sent to shredders); the minimum cost (12.3%) was realized for the output of A Group components/parts (sent to recyclers).
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

Nowadays, there has been a growing interest in reverse logistics in both theory and practice due to legislations, economic and ecological benefits, and social responsibilities. If enterprises incorporating reverse logistics activities to its structure want to realize the required level of customer service and comply with related obligations at the lowest total cost, analyzing the actualized reverse logistics activities and correct determination and reduction of costs of these activities are essential for them. Traditional accounting methods are inadequate for accurate assignment of overhead costs. In this paper, an actual application of Activity Based Costing (ABC) to reverse logistics activities is presented in order to help managers to improve their understanding of costs that arises from reverse logistics activities. An illustrative case study in the end-of-life vehicle (ELV) recovery industry in Turkey is presented to demonstrate the steps of how ABC is applied to reverse logistics systems. The results enable to efficient management of reverse logistics activities and their costs in an ELV recovery chain and exhibit which reverse logistics activities performed by a dismantler cause the highest cost and can be improved. In the case study, products (ELVs) are evaluated as inputs and the obtained materials from reverse logistics activities are evaluated as outputs of the system by force of the nature of reverse logistics. Results show that while most cost of the company (52.7%) was related with the output of B Group of components/parts (sent to shredders); the minimum cost (12.3%) was realized for the output of A Group components/parts (sent to recyclers). The remaining 35% of the costs belong to the C Group of outputs (sent to secondary markets).

🔖

Cite This Article

AKSOYLU, S., DEMİREL, N. (2018). Application of Activity Based Costing in Reverse Logistics Environment: A Case of End-of-life Vehicle Recovery in Turkey. İşletme Araştırmaları Dergisi, Cilt: 10 - Sayı: 4, 953–973. https://ajindex.com/articles/268961

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Al-Omiri, M.; Drury C. (2007). Organizational and behavioral factors influencing the adoption and success of ABC in the UK. Cost Manag, 21, 38. Arslan, S.; Varol N.B. (2010). Storage costs in respect to activity-based cost on the logistics chain and a case study. Account Auditing Rev, 69-88.
  2. Askarany, D.; Yazdifar, H.; Askary, S. (2010). Supply chain management, activity-based costing and organisational factors. Int J Prod Econ, 127 (2010): 238-248.
  3. Askarany, D.; Yazdifar, H.; Askary, S. (2012). An investigation into the mixed reported adoption rates for ABC: Evidence from Australia, New Zealand and the UK. Int J Prod Econ, 135 (1): 430-439.
  4. Baykasoğlu, A.; Kaplanoğlu, V. (2008). Application of activity-based costing to a land transportation company: A case study. Int J Prod Econ, 116 (2): 308-324.
  5. Bras, B.; Emblemsvag J. (1995). The use of activity-based costing, uncertainty, and disassembly action charts in demanufacture cost assessments. 1995 ASME Advances in Design Automation Conference, Boston, Massachusetts, September, 17-20.
  6. Brierley, J.A.; Cowton, C.J.; Drury, C. A (2006). Comparison of product costing practices in discrete-part and assembly manufacturing and continuous production process manufacturing. Int J Prod Econ, 100: 314–321.
  7. Chen, F.F. (1996). Activity-Based Approach to Justification of Advanced Factory Management Systems. Ind Man Data Sys, 96 (2): 17-27.
  8. Chileshe, N.; Rameezdeen, R.; Hosseini, M.R. (2016). Drivers for adopting reverse logistics in the construction industry: a qualitative study. Eng Constr Archit Manag, 23 (2): 134-157.
  9. Chileshe, N.; Rameezdeen, R.; Hosseini, M.R.; Lehmann, S.; Udeaja, C. (2016). Analysis of reverse logistics implementation practices by South Australian construction organizations. Int J Oper Prod Manag, 36 (3): 332-356.
  10. Coates, G.; Rahimifard, S. A cost estimation framework to support increased value recovery from end-of-life vehicles. Int J Comput Integr Manuf, 2008, 21 (8): 895-910.
  11. Dekker, H.C.; van Goor, A.R. (2000). Supply chain management and management accounting: a case study of activity based costing. Int J Logist: Res Appl, 3(1): 41–52.
  12. Deran, A.; Arslan, S.; Köksal, A.G. İşletmelerde Lojistik Maliyetlerin Hesaplanması. Eğitim Press,
  13. Konya, Turkey. Demirel, E.; Demirel, N.; Gökçen, H. (2016). A mixed integer linear programming model to optimize reverse logistics activities of end-of-life vehicles in Turkey. J Clean Prod, 112(3): 2101–2113.
  14. Demirel, N.Ö.; Gökçen, H. (2008). A mixed integer program