SavedAdd your journal

Journals / International Journal of Advances in Engineering and Pure Sciences / 2019 / Özel Sayı II:

Utiziling Recycled High Density Polyethylene Caps of Polyethylene Terephthalate Bottles in Composite Plates

Polietilen Tereftalat Şişelerin Geri Dönüştürülmüş Yüksek Yoğunluklu Polietilen Kapaklarının Kompozit Yapılarda Değerlendirilmesi

Hande SEZGİN
İpek YALÇIN ENİŞ
Merve KÜÇÜKALİ ÖZTÜRK
Telem GÖK SADIKOĞLU
Pages
108–112
Publication Date
2019-12-20
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

These bi-layered and three-layered composite plates are physically and mechanically tested for appropriate end use areas.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, composite plates that are consisted of recycled HDPE polymer matrix and reinforced with woven fabrics (cellulosic fiber content; flax and jute) are manufactured in order to contribute polymer waste management.
📊
Key Findings & Data:Plates are than reinforced with 100% jute and 100% flax woven fabrics with different sequence combinations by hot press machine.
💡
Conclusion & Impact:These bi-layered and three-layered composite plates are physically and mechanically tested for appropriate end use areas.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:kompozit · geri dönüşüm · ambalaj atığı

Abstract

In this study, composite plates that are consisted of recycled HDPE polymer matrix and reinforced with woven fabrics (cellulosic fiber content; flax and jute) are manufactured in order to contribute polymer waste management. Used HDPE bottle caps are collected for recycling and hot press method is used to produce HDPE matrix plates. Plates are than reinforced with 100% jute and 100% flax woven fabrics with different sequence combinations by hot press machine. Temperature, production time, pressure and cooling rate are the crucial parameters that are optimized for forming composite materials. These bi-layered and three-layered composite plates are physically and mechanically tested for appropriate end use areas.

Özet

Bu çalışmada, polimer atık yönetimine katkıda bulunmak amacıyla geri dönüştürülmüş yüksek yoğunluklu polietilen (YYPE) polimer matrisinden oluşan ve dokuma kumaşlarla (selülozik elyaf içeriği; keten ve jüt) takviyelendirilmiş kompozit plakalar üretilmiştir. Kullanılmış YYPE şişe kapakları geri dönüşüm için toplanmış ve YYPE matris plakaları üretmek için sıcak presleme yöntemi kullanılmıştır. Plakalar, sıcak pres makinası ile farklı sıralama kombinasyonlarında % 100 jüt ve % 100 keten dokuma kumaşlarla takviyelendirilmiştir. Sıcaklık, üretim süresi, basınç ve soğutma oranı kompozit malzemeleri oluşturmak için optimize edilmiş kritik parametrelerdir. Bu iki katmanlı ve üç katmanlı kompozit plakalar, uygun son kullanım alanlarına göre fiziksel ve mekanik olarak test edilmiştir.

🔖

Cite This Article

SEZGİN, H., ENİŞ, İ. Y., ÖZTÜRK, M. K., SADIKOĞLU, T. G. (2019). Utiziling Recycled High Density Polyethylene Caps of Polyethylene Terephthalate Bottles in Composite Plates. International Journal of Advances in Engineering and Pure Sciences, Özel Sayı II:, 108–112. https://ajindex.com/articles/257865

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Campbell F.C. (2010). Structural Composite Materials. ASM International
  2. Das K., Gon D., Maity S., Paul P. (2012). Jute Composites as Wood Substitute. Int J Text Sci, 1(6), 84-93
  3. Aran, A. (1990).Elyaf Takviyeli Karma Malzemeler. Course Notes, Istanbul Technical University, Istanbul, Turkey
  4. Jabbar A., Militký J., Wiener J., Madhukar Kale B., Ali U., Rwawiire S. (2017). Nanocellulose coated woven jute/green epoxy composites: Characterization of mechanical and dynamic mechanical behavior. Compos. Struct, 161, 340–349
  5. Smith P.A., Yeomans J. A. (2009). Benefits of fiber and particulate reinforcement. Mater Sci Eng, 2, 133-154
  6. Mohammed L., Ansari M.N.M., Pua G., Jawaid M., Islam M.S. (2015). A Review on Natural Fiber Reinforced Polymer Composite and Its Applications. Int J of Polym Sci, 1-15
  7. Faruk O., Bledzki A.K., Fink H.P., Sain M. (2012). Biocomposites reinforced with natural fibers: 2000-2010. Prog in Polym Sci., 37(11), 1552–1596
  8. Dicker M.P.M., Duckworth P.F., Baker A.B., Francois G., Hazzard M.K., Weaver P.M. (2014). Green composites: A review of material attributes and complementary applications. Compos. Part A: Appl S, 56, 280-289
  9. Lancioniand R.A., Chandran R. (1990). The role of packaging in international logistics. Int J Phys Distribut Logistics Manage, 20(8), 41–43
  10. Addy R. (2012). Rigid Losing to Flexible Packaging in North America, http://www.foodproductiondaily.com/ Packaging/Rigid-losing-to-flexiblepackaging-in-North-America
  11. PAGEV, Turkey Pet Thermoform Sector Report, (2016)
  12. Noorunnisa Khanam P., Al Ali AlMaadeed M. (2015). Processingandcharacterization of polyethylene-based composites. Adv Manuf: Polymer Compos Sci, 1:2, 63-79
  13. McCarty J.A., Shrum L.J. (1994). The recycling of solid wastes: Personal values, value orientations, and attitudes about recycling as antecedents of recycling behavior. J Bus Res, 30(1), 53
  14. VanGuilder C. (2018). Hazardous waste management: an introduction. Stylus Publishing, LLC, 193 - 194.