Journals / Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2011 / Cilt: 1 - Sayı: 2

The Effects of Supporting Electrolyte type and Concentration on the Phosphate Removal from Wastewater By Electrocoagulation With Aluminum Plate Electrodes

Alüminyum Elektrotlar Kullanılarak Elektrokoagülasyon Yöntemiyle Atıksulardan Fosfat Giderimine Destek Elektrolit Tipi Ve Konsantrasyonunun Etkisi

Pages
35–40
Publication Date
2011-06-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Consequently, it can be said thatoptimal electrolyte type is NaCI and optimal concentration is 5 mM.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, The effects of type and concentration of electrolyte on phosphate removal fromwastewater by electrocoagulation with aluminum plate electrodes have been investigated.Effect of supporting electrolyte type was investigated using NaCI , KCI, NaNO3 and Na2SO4.
📊
Key Findings & Data:Although Na2SO4 isoptimal supporting electrolyte according to energy consumption, it is obtained higher removal efficiencies usingNaCI and KCI.
💡
Conclusion & Impact:Consequently, it can be said thatoptimal electrolyte type is NaCI and optimal concentration is 5 mM.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Fosfat giderimi · elektrokimyasal arıtım · elektrokoagülasyon

Abstract

In this study, The effects of type and concentration of electrolyte on phosphate removal fromwastewater by electrocoagulation with aluminum plate electrodes have been investigated.Effect of supporting electrolyte type was investigated using NaCI , KCI, NaNO3 and Na2SO4. Although Na2SO4 isoptimal supporting electrolyte according to energy consumption, it is obtained higher removal efficiencies usingNaCI and KCI. It is determined optimal supporting electrolyte dosage using NaCI. Consequently, it can be said thatoptimal electrolyte type is NaCI and optimal concentration is 5 mM.

Özet

Bu çalışmada alüminyum elektrotlar kullanılarak elektrokoagülasyon yöntemiyle atıksulardan fosfat iyonlarının giderilmesinde kullanılan destek elektrolit türü ve konsantrasyonunun etkisi çalışılmıştır. Destek elektrolit tipi araştırılırken NaCI , KCI, NaNOand NaSO kullanılmıştır. Enerji tüketimi açısından NaSOen uygun destek elektrolit olarak görünmesine rağmen NaCI ve KCI ile elde edilen giderme verimleri daha yüksektir. En uygun destek elektrolit NACI ve en uygun destek elektrolit konsantrasyonu 5 mM olarak tespit edilmiştir

🔖

Cite This Article

İRDEMEZ, Ş., DEMİRCİOĞLU, N., TOSUNOĞLU, V. (2011). The Effects of Supporting Electrolyte type and Concentration on the Phosphate Removal from Wastewater By Electrocoagulation With Aluminum Plate Electrodes. Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Cilt: 1 - Sayı: 2, 35–40. https://ajindex.com/articles/257525

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Agyei, N.M., Strydom, C.A., Potgieter, J.H., 2003. Discussion: Reply to the discussion by A. Demirbaş of the paper “ the removal of phosphate,ons from aqueous solution by fly ash, slag, ordinary Portland cement and related blends, Cement and Concrete. Research, 33, 937. APHA, 1985, Standard Methods for Examination of Water and Wastewater. Ayala, J., Blanco, F., Garcia, P., Rodriguez, P., Sancho, J., 1998. Asturian fly ash as a heavy metals removal material, Fuel 77, 1147-1154.
  2. Batabyal, D., Sahu, A., Chaudhuri, S.K., 1995. Kinetics and mecha- nism of removal 2,4- dimethyl phenol from aqueous solutions with coal fly ash, Seperation Technology, 5, 179-186.
  3. Board, A.J., Persons, R., Jordan, J., 1985. Editors Standarts poten- tials in aqueous solution New York. Chen, G., Chen, X., Yue, P., L., 2000a. Electrocoagulation and elec- troflotation of restaurant wastewater. Journal of Environmen- tal Engineering 858-863.
  4. Donini, J.C., Kan, J., Szynkarczuk, J., Hassan, T.A., Kar, K.L., 1994. The operating cost of electrocoagulation. The Canadian Journal of Chemical Engineering. 72, 1007-1012.
  5. Eilbeck, W.J., Mattock, G., 1987. Chemical processes in wastewater treatment. John Wiley & Sons, New York. Gupta, G., Torres, N., 1998. Use of fly ash in reducing toxicity of and heavy metals in wastewater effluent Journal of Hazardous Materials, 57, 243-248.
  6. Hequet, V., Ricou, P., Lecuyer, I., 2001.
  7. Le Cloirec, P., Removal os Cu2+ and Zn2+ in aqueous solution onto mixed fly ash, Fuel 80, 851-856.
  8. İrdemez, Ş., Yıldız, Y.Ş., Demircioğlu, N., 2004. Phosphate removal from wastewaters using fly ash adsorption, International Soil Congress, Erzurum, Turkey. Kao, P.J., Tzeng, J.H., Huang, T.L., 2000. Removal of chlorophe- nols from aqueous solution by fly ash, Journal of Hazardous Materials. 76, 237-249.
  9. Koparal, A.S., Öğütveren, Ü.B., 2002a. Removal of nitrate from water by electroreduction and electrocoagulation. Journal of Hazardous Materials. B89 83-94.
  10. Koumanova, B., Drame, M., Popangelova, M., 1997. Phosphate re- moval from aqueous solutions using red mud wasted in baux- ite Bayer’s process, Resources Conservation and Recycling, 19, 11-20.
  11. Lin, C.J.,Chang, J.E., 2001. Effect of fly ash characteristics on the removal of Cu(II) from aqueous solution, Chemosphere, 44, 1185-1192. Öğütveren,,Ü.B., Koparal, S.,1997a. Electrocoagulation for oil- water emülsion treatment. Journal of Environmental Science and Health A32 (9&10),2507-2520.
  12. Rao, M., Parwate, A.V., Bhole, A.G., 2002. Removal