Journals / Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2016 / Cilt: 6 - Sayı: 3

The Electrical Characterization Effect of Insulator Layer between Semiconductor and Metal

Metal ve Yarıiletken Arasındaki Yalıtkan Tabakanın Elektriksel karakterizasyon Etkisi

Pages
57–67
Publication Date
2016-09-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was observed that from the C-Vcharacterizations at 500 kHz dual, contact behaved similarly memristor structure.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Metal-Insulator-semiconductor contacts (MIS) have been studied its importance inelectronic and optoelectronic.
📊
Key Findings & Data:For this reason, Si3N4 were deposited with PECVD technique onp-type Si about 5 nm thickness layers.
💡
Conclusion & Impact:It was observed that from the C-Vcharacterizations at 500 kHz dual, contact behaved similarly memristor structure.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Al/Si 3N4/p-Si · kapasitör özelliği · metal-yalıtkan-yarıiletken yapılar

Abstract

Metal-Insulator-semiconductor contacts (MIS) have been studied its importance inelectronic and optoelectronic. Their importance comes from its so high dielectric constant, storage layerproperty and effect of capacitance. For this reason, Si3N4 were deposited with PECVD technique onp-type Si about 5 nm thickness layers. The thicknesses of Si3N4 were measured with an elipsometre andobtained MIS contact with Al contact. It was researched the insulator layer effect on the Al/p-Si contact.Its electrical characterizations were inquired by use of the forward and reverse bias I-V, C–V and G-Vmeasurements and were seen that the insulator Si3N4 layer influenced characterizations of the contact.Effect of the interface states (Nss), the series resistance (Rs) and the other some electrical parameterswere investigated by calculating from I-V and C–V measurements. It was observed that from the C-Vcharacterizations at 500 kHz dual, contact behaved similarly memristor structure.

Özet

Metal-yalıtkan-yarıiletken (MIS) aygıtlar elektronik ve optoelektronikteki önemlerindendolayı çalışılmaktadır. Bu önem aygıtların yüksek dielektrik sabitine, depolama tabakası ve kapasitansözelliklerine sahip olmalarından kaynaklanmaktadır. Bu yüzden Si3N4 tabakası p-tipi Si üzerinePECVD tekniği kullanılarak büyütülmüş, kalınlığı elipsometre ile 5 nm olarak ölçülmüştür ve Alkontak sayesinde MIS yapısı elde edilmiştir. Elde edilen Al/p-Si yapısı üzerine Si3N4 tabakasının etkisiaraştırılmıştır. Bunun için aygıtın elektrik karakterizasyonları ileri ve ters beslem I-V, C–V ve G-Völçümleriyle yapılmış ve yalıtkan Si3N4 tabakanın diyot özelliklerini oldukça etkilediği görülmüştür. Arayüzey halleri (Nss), seri direnç (Rs) ve diğer bazı elektriksel parametrelerin aygıt üzerine etkileri I-Vve C–V ölçümlerinden hesaplanarak araştırılmıştır. C-V ölçümlerinden aygıtın memristör bir yapı gibidavrandığı tespit edilmiştir

🔖

Cite This Article

ORAK, İ., KOÇYİĞİT, A. (2016). The Electrical Characterization Effect of Insulator Layer between Semiconductor and Metal. Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Cilt: 6 - Sayı: 3, 57–67. https://ajindex.com/articles/257296

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Ataseven T, Tatatroğlu A, 2013. Temperature-dependent dielectric properties of Au/Si3N4/n-Si (metal insulator semiconductor) structures. Chin. Phys. B, 22(11): 117310-1- 117310-6.
  2. Bilkan Ç, Zeyrek S, San SE, Altındal Ş, 2015. A compare of electrical characteristics in Al/p-Si(MS) and Al/C20H12/pSi (MPS) type diodes using current–voltage (I–V) and capacitance–voltage(C–V) measurements. Materials Science in Semiconductor Processing 32: 137–144.
  3. Bülbül MM, Zeyrek S, 2006. Frequency dependent capacitance and conductance–voltage characteristics of Al/Si3N4/p-Si(100) MIS diodes. Microelectronic Engineering 83: 2522–2526.
  4. Bülbül MM, Zeyrek S, Altındal Ş, Yüzer H, 2006. On the profle of temperature dependent series resistance in Al/Si3N4/pSi (MIS) Schottky diodes. Microelectronic Engineering 83: 577–581.
  5. Card HC, Rhoderick EH, 1971. E. H. Studies of tunnel MOS diodes I. Interface effects in silicon Schottky diodes. J. Phys. D: Appl. Phys 4:1589–1601.
  6. Cheung SK, Cheung NW, 1986. Extraction of Schottky diode parameters from forward current‐voltage characteristics. Appl.Phys.Lett. 49 (2): 85-88.
  7. Demircioglu Ö, Karataş Ş, Yıldırım N, Bakkaloglu ÖF, Türüt A, 2011. Temperature dependent current–voltage and capacitance–voltage characteristics of chromium Schottky contacts formed by electrodeposition technique on n-type Si Journal of Alloys and Compounds 509: 6433- 6439. El-Nahass NN, Metwally HS, El-Sayed HEA, Hassanien AM, 2011. Electrical and photovoltaic properties of FeTPPCl/p-Si heterojunction. Synthetic Metals 161: 2253– 2258. Gökçen M, Altuntaş H, Altındal Ş, Özçelik S, 2012. Frequency and voltage dependence of negative capacitance in Au/ SiO2/n-GaAs structures. Materials Science in Semiconductor Processing 15: 41–46.
  8. Güllü Ö, Türüt A, 2010. Electrical analysis of organic dye-based MIS Schottky contacts. Microelectronic Engineering 87: 2482-2487.
  9. Güllü Ö, Aydoğan Ş, Türüt A, 2012. High barrier Schottky diode with organic interlayer. Solid State Communications 152: 381-385.
  10. Karataş Ş, Yildirim N, Türüt A, 2013. Electrical properties and interface state energy distributions of Cr/n-Si Schottky barrier diode. Superlattices and Microstructures 64: 483-494.
  11. Korucu D, Duman S, 2015. Frequency and Temperature Dependent Interface States and Series Resistance in Au/SiO2/p-Si (MIS) Diode. Science of advanced materials 7(7): 1291-1297.
  12. Lee J, Uhrmann T, Dimopoulos T, Bruckl H, Fidler J, 2010. TEM Study on Diffusion Process of NiFe Schottky and MgO/ NiFe Tunneling Diodes for