SavedAdd your journal

Journals / Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2020 / Cilt: 10 - Sayı: 1

Preparation of Polyethylene-Reduced Graphene Oxide and Polyethylene-Reduced Graphene Oxide-Aramid Composites

Polietilen-İndirgenmiş Grafen Oksit ve Polietilen-İndirgenmiş Grafen Oksit-Aramid Kompozitlerinin Hazırlanması

Bahar MERYEMOĞLU
Oktay ERBATUR
Pages
427–438
Publication Date
2020-03-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results showed that these solid composites containing very low amounts (0.1%) of nano additives can be used easily in conventional plastic processing.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, reduced graphene oxide and aramid/ reduced graphene oxide were used a filler in polyethylene which is easy to process.
📊
Key Findings & Data:Composite materials containing 0.1% of polymer were prepared by melt blending method using thermokinetic mixer and hot-cold isostatic press.Mechanical tensile analysis of the composites were examined.
💡
Conclusion & Impact:The results showed that these solid composites containing very low amounts (0.1%) of nano additives can be used easily in conventional plastic processing.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Grafen · aramid · kompozit

Abstract

In this study, reduced graphene oxide and aramid/ reduced graphene oxide were used a filler in polyethylene which is easy to process. Composite materials containing 0.1% of polymer were prepared by melt blending method using thermokinetic mixer and hot-cold isostatic press.Mechanical tensile analysis of the composites were examined. The results showed that these solid composites containing very low amounts (0.1%) of nano additives can be used easily in conventional plastic processing.

Özet

Bu çalışmada işlenebilirliği kolay olan polietilene (PE) dolgu materyali olarak indirgenmiş grafen oksit (iGO) ve Aramid/iGO eklenmiştir. Polimerin % 0.1’ini içerecek şekilde kompozit materyaller eriyik harmanlama metodu ile termokinetik mikser ve sıcak-soğuk izostatik pres ile hazırlanmıştır. Elde edilen kompozitlerin mekanik çekme testleri incelenmiştir. Çok düşük oranlarda (% 0.1) nano katkı maddeleri içeren bu katı kompozit maddelerin konvansiyonel plastik işlemelerinde rahatlıkla kullanılabilecekleri gösterilmiştir.

🔖

Cite This Article

MERYEMOĞLU, B., ERBATUR, O. (2020). Preparation of Polyethylene-Reduced Graphene Oxide and Polyethylene-Reduced Graphene Oxide-Aramid Composites. Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Cilt: 10 - Sayı: 1, 427–438. https://ajindex.com/articles/256994

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Ansari S, Giannelis EP, 2009. Functionalized graphene sheet-poly(vinylidene fluoride) conductive nanocomposites. J Polym Sci Part B - Polym Phys, 47, 888. Aranda P, Ruiz-hitzky E, 1992, Poly(ethylene-oxide) / Silicate Intercalation Materials, Chemical Materials, 4;1395-1403.
  2. Choi H, KIM S, HYUN Y, JOHN M, 2001. Preparation and Rheological Characteristics of Solvent Cast Poly (ethylene-oxide)/Montmorillonite Nanocomposites, Macromolecular Rapid Communication, 22;320. Dreyer DR, Park S, Bielawski CW, Ruoff RS, 2010.
  3. The chemistry of graphene oxide, Chem. Soc. Rev, 39;228–240. Erikli E, 2014. Grafen oksit/aramid ve Grafen/aramid Kompozitlerinin Geliştirilmesi, Çukurova Üniversitesi Fen Bilimleri Enstitüsü, Yüksek Lisans Tezi (Basılmış). Gómez-Navarro C, Weitz RT, Bittner AM, Scolari M, Mews A, Burghard M, Kern K, 2007. Electronic Transport Properties of Individual Chemically Reduced Graphene Oxide Sheets, Nano Lett, 7;3499–3503.
  4. Graf D, Molitor F, Ensslin K, Stampfer C, Jungen A, Hierold C, Wirtz L, 2007. Spatially resolved Raman spectroscopy of single- and few-layer graphene. Nano Lett, 7;238–42.
  5. He H, Klinowski J, Forster M, Lerf A, 1998. A new structural model for graphite oxide, Chemical Physics Letters 287; 53–56. Hummers WS ve Offeman RE, 1958. Preparation of Graphitic Oxide. Journal of the American Chemical Society, 80;1339-1339.
  6. Jang BZ, Zhamu A, 2008. Processing of nanographene platelets (NGPs) and NGP nanocomposites: a review. J Mater Sci, 43:5092-101.
  7. Jeon H, JUNG H, LEE S, HUDSON S, 1998. Morphology of Polymer/Silicate Nanocomposites, Polymer Bulletin, 41; 107-113.
  8. Jiang L, Shen XP, WU, J.L., SHEN, K.C., 2010. Preparation and characterization of graphene/poly(vinyl alcohol) nanocomposites, J.Appl Polym Sci, 118;275. Kim H, Macosko CW, 2008. Morphology and Properties of Polyester/Exfoliated Graphite Nanocomposites, Macromolecules, 41;3317–3327.
  9. Kim H, Macosko CW, 2009. Processing-property relationships of polycarbonate/graphene composites. Polymer, 50;3797–3809. Kotov N, 2006. Materials science: Carbon sheet solutions. Nature, 442;254. Kudin KN, 2008. Raman spectra of graphite oxide and functionalized graphene sheets. Nano Lett. 8(1);36–41.
  10. Liang Y, Wu D, Feng X, Mullen K, 2009. Dispersion of Graphene Sheets in Organic Solvent Supported by Ionic Interactions. Adv Mater. 21;1679–1683.
  11. Li D, Müller MB, Gilje S, Kaner RB, Wallace GG, 2008. Processable aqueous dispersions of graphene nanosheets.Nat. Nanotechnol, 3;101-106.
  12. Marcano DC, Kosynkin DV, Berl