Journals / Bor Dergisi / 2019 / Cilt: 4 - Sayı: 1

Synthesis and characterization of Mn2B nanocrystals by mechanical alloying method

Pages
25–30
Publication Date
2019-03-16
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Mn2B sample shows ferromagnetic behavior at room temperature with saturation magnetization of 13 emu/g and coercivity of 90 Oe.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, elemental Mn and B initial materials were used to synthesize pure Mn2B nanocrystals by ball milling.
📊
Key Findings & Data:Milling experiments were conducted with highenergy planetary ball mill in a hardened steel vial with hardened steel balls, under Ar atmosphere at 40:1 ball-to-powder ratio and 300 rpm rotating speed.
💡
Conclusion & Impact:Mn2B sample shows ferromagnetic behavior at room temperature with saturation magnetization of 13 emu/g and coercivity of 90 Oe.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Mn2B · nanoparticle · mechanochemical method

Abstract

In this study, elemental Mn and B initial materials were used to synthesize pure Mn2B nanocrystals by ball milling. Milling experiments were conducted with highenergy planetary ball mill in a hardened steel vial with hardened steel balls, under Ar atmosphere at 40:1 ball-to-powder ratio and 300 rpm rotating speed. As synthesized Mn2B nanocrystals phase structures and morphological/microstructural investigation were analyzed by X-Ray diffractometry (XRD) and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM/EDX), respectively. Particle size of Mn2B were calculated as 34.5 nm by Rietveld refinement. Furthermore, the magnetic behavior of nanocrystals were determined by vibrating sample magnetometer (VSM). Mn2B sample shows ferromagnetic behavior at room temperature with saturation magnetization of 13 emu/g and coercivity of 90 Oe.

🔖

Cite This Article

ŞİMŞEK, T., ŞİMŞEK, T., ÖZCAN, Ş. (2019). Synthesis and characterization of Mn2B nanocrystals by mechanical alloying method. Bor Dergisi, Cilt: 4 - Sayı: 1, 25–30. https://ajindex.com/articles/252173

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (16)

  1. Wang B., Li X., Wang Y.X., Tu Y.F., Phase Stability and physical properties of manganese borides: A firstprinciples study, J. Phys. Chem. C, 115, 21429–21435, 2011
  2. Liu G., Li J., Chen K., Combustion synthesis of refractory and hard materials: A review, Int. J. Refract. Met. Hard Mater., 39, 90–102, 2013
  3. Kang S. H., Kim D. J., Synthesis of nano-titanium di-boride powders by carbothermal reduction, J. Eur. Ceram. Soc., 27, 715–718, 2007
  4. Barış M., Şimşek T., Taşkaya H., Chattopadhyay A.K., Synthesis of Fe-Fe2B catalysis via solvothermal route for hydrogen generation by hydrolysis of NaBH4, BORON, 3 (1) 51-62, 2018
  5. Y., Zhang J., Zou C., Lin H.T., An L., Zhang F., Wang C., Synthesis of osmium borides by mechanochemical method, J. Am. Chem. Soc., 100 (6), 2419-2428, 2017
  6. Suryanarayana C., Mechanical Alloying and Milling, 1st edition, Marcel Dekker, New York, 2004
  7. Avar B., Ozcan S., Characterization and amorphous phase formation of mechanically alloyed Co60Fe5Ni5Ti25B5 powders, J. Alloys Compd., 650, 53-58, 2015
  8. Suryanarayana C., Phase formation under nonequilibrium processing conditions: rapid solidification processing and mechanical alloying, J. Mater. Sci., 53 (19), 13364–13379, 2018
  9. Avar B., Simsek T., Gogebakan M., Mekanik alaşımlama ile üretilen Nanokristal Fe60Al30Cu10 (at.%) tozların yapısal ve mekanik özellikleri, G.U. J. Sci. Part C, 7 (1) 184-191, 2019
  10. Simsek, T, Baris M, Kalkan B, Mechanochemical processing and microstructural characterization of pure Fe2B nanocrystals, Adv. Powder Technol., 28 (11), 3056-3062, 2017
  11. Adil S., Karati A., Murty B.S., Mechanochemical synthesis of nanocrystalline aluminium boride (AlB12), Ceram. Int., 44 (16), 20105-20110, 2018
  12. Long Y., Zhang J., Zou C., Lin H.T., An L., Zhang F., Wang C., Synthesis of osmium borides by mechanochemical method, J. Am. Ceram. Soc., 100, 2419–2428, 2017
  13. Bilen B., Gürü M., Çakanyildirim Ç., Conversion of KCl into KBH4 by Mechano-Chemical Reaction and its Catalytic Decomposition, Journal of Electronic Materials, 46 (7), 4126–4132, 2017
  14. Kalay S., Yilmaz Z., Sen O., Emanet M., Kazanc E., Çulha M., Synthesis of boron nitride nanotubes and their applications, Beilstein J. Nanotechnol., 6, 4–102, 2015
  15. Mohammad O. T., Golabgir H., Tajizadegan H., Jamshidi A., Mechanochemical behavior of magnesium–boron oxide–melamine ternary system in the synthesis of h-BN nanopowder, Ceram. Int., 42 (5) 6450-6456, 2016
  16. Makarenko G.