SavedAdd your journal

Journals / Bor Dergisi / 2018 / Cilt: 3 - Sayı: 2

Dry sliding behaviour of boron waste reinforced epoxy matrix composites

Bilge Yaman
Nurcan Çalış Açıkbaş
Pages
63–70
Publication Date
2018-07-05
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was found that, hardness, flexural modulus and wear resistance properties were increased with the incorporation of boron wastes.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The demand for utilization of boron wastes related to the generation of massive amounts in each year is on the rise.
📊
Key Findings & Data:In order to meet this growing need and demand for fabrication of environmentally friendly products, epoxy matrix composites containing 60wt% of boron wastes was developed.
💡
Conclusion & Impact:It was found that, hardness, flexural modulus and wear resistance properties were increased with the incorporation of boron wastes.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:boron waste · epoxy matrix composites · friction

Abstract

The demand for utilization of boron wastes related to the generation of massive amounts in each year is on the rise. In order to meet this growing need and demand for fabrication of environmentally friendly products, epoxy matrix composites containing 60wt% of boron wastes was developed. The influence of boron waste addition and the particle size of boron waste on epoxy matrix composites on physico-mechanical and tribological properties were evaluated. It was found that, hardness, flexural modulus and wear resistance properties were increased with the incorporation of boron wastes. Wear resistance increased with increasing boron waste particle size. The lowest specific wear rate was achieved for the largest particle size added composites. The physico-mechanical properties as well as microstructure wear behavior correlation were evaluated comprehensively.

🔖

Cite This Article

Yaman, B., Açıkbaş, N. Ç. (2018). Dry sliding behaviour of boron waste reinforced epoxy matrix composites. Bor Dergisi, Cilt: 3 - Sayı: 2, 63–70. https://ajindex.com/articles/252104

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Eti Mine Works General Management, Project Report, Eskişehir/Turkey, 2013 (
  2. Bentli T., Özdemir O., Çeük M. S., Ediz N., Bor atıkları ve değerlendirilme -stratejileri, The First International Boron Symposium, Kütahya, Turkey, 250-258, 2002 http://www.maden.org.tr/resimler/ekler/c4e a5258ef3fb3f_ek.pdf
  3. Kavas K., Emrullahoğlu, Ö. F., Seydişehir kırmızı çamuru ve Kırka bor atıklannın endüstriyel hammadde olarak kullanımı, LButı Anadolu Hammadde Kaynakları Sempozyumu, TMMOB Jeoloji Mühendisleri Odası, İzmir, 216-225, 1999
  4. Genç S., Sevinç V., Özşeker A., Çakı M., Etibank Kırka boraks işletmesi konsantratör atığının sır hammaddesi olarak değerlendirilmesi, 4. Seramik Kongresi. Türk Seramik Derneği Yayınları No: 20 Eds Turan, Kara&Pfltun, Eskişehir, 119-124, 1998
  5. Kavas T., Christogerou A., Pontikes Y., Angelopoulos G. N., Valorisation of different types of boron-containing wastes for the production of lightweight aggregates, J. Hazard. Mater., 185 (2-3), 1381-1389, 2011
  6. Özdemir M., Öztürk N. U., Utilization of clay wastes containing boron as cement additives, Cem. Concr. Res., 33 (10), 1659-1661, 2003
  7. Sönmez E., Özdağ H., Özler A., Sümer G., Kırka boraks işletmesi atık killerinin seramik endüstrisinde kullanılabilirliğinin araştırılması, Türkiye 13. Madencilik Kongresi, TMMOB Maden Mühendisleri Odası Istanbul, 561-566, 1993
  8. Sönmez E., Yorulmaz S., Kırka boraks işletmesi atık killerinin tuğla yapımında kullanılabilirliğinin araştırılması, Endüstriyel Hammaddeler Sempozyumu, TMMOB Maden Mühendisleri Odası, İzmir, 163-168, 1995
  9. Ediz N, Özdag H., Kırka boraks işletmesi atık killerinin tuğla yapımında kullanılabilirliğinin araştırılması, TMMOB Madencilik Dergisi, Cilt 34, Sayı 4, Ankara, 27-34, 1995
  10. Wang R. M., Zheng S. R., Zhen Y. P., Polymer Matrix Composites and Technology, Woodhead Publishing in Materials, 2011
  11. Acikbas G., Gocmez H., Characterization and properties of industrial polymer matrix composite sanitarywares, Materials Testing, 59 (11-12), 1067-1074, 2017
  12. Menezes R. R., Santana L. N. L., Neves and Ferreira H. C., Recycling of Mine Wastes as Ceramic Raw Materials: An Alternative to Avoid Environmental Contamination, Environmental Contamination, Dr. Jatin Srivastava (Ed.), InTech, 199-220, 2012
  13. Ashori A., Hybrid composites from waste materials, J. Polym. Environ.,18, 65–70, 2010
  14. Medupin R.