Journals / Bor Dergisi / 2020 / Cilt: 5 - Sayı: 3

First principles investigations of Ta4AlX3 (X= B, C, N) MAX phase ceramics

Pages
115–123
Publication Date
2020-09-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In this study, Ta4AlB3 has been considered for the first time along with Ta4AlC3 and Ta4AlN3 compounds and the effect of X atom to the properties of these compounds have been discussed in detail.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Ta4AlX3 (X=B, C, N) MAX phase ceramics have been examined using first principles calculations in this study.
📊
Key Findings & Data:Ta4AlX3 MAX phase ceramics have hexagonal crystal structure and the formation energies have been determined for the optimized crystal structures.
💡
Conclusion & Impact:In this study, Ta4AlB3 has been considered for the first time along with Ta4AlC3 and Ta4AlN3 compounds and the effect of X atom to the properties of these compounds have been discussed in detail.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:MAx phases · Density Functional Theory · Mechanical properties

Abstract

Ta4AlX3 (X=B, C, N) MAX phase ceramics have been examined using first principles calculations in this study. Ta4AlX3 MAX phase ceramics have hexagonal crystal structure and the formation energies have been determined for the optimized crystal structures. The elastic constants of Ta4AlX3 MAX phase ceramics have been determined and these constants satisfy the mechanical stability criteria. In addition, the mechanical properties such as bulk modulus, shear modulus, etc. have been obtained to reveal the detailed properties of these compounds. The anisotropic elastic properties have been visualized in both 3D and 2D. Moreover, the thermal properties of Ta4AlX3 MAX phase ceramics such as thermal expansion coefficient, heat capacity etc. have been studied in 0 to 1000 K temperature range and 0 to 40 GPa pressure range. In this study, Ta4AlB3 has been considered for the first time along with Ta4AlC3 and Ta4AlN3 compounds and the effect of X atom to the properties of these compounds have been discussed in detail.

🔖

Cite This Article

GENCER, A. (2020). First principles investigations of Ta4AlX3 (X= B, C, N) MAX phase ceramics. Bor Dergisi, Cilt: 5 - Sayı: 3, 115–123. https://ajindex.com/articles/252066

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Low I. M., Advances In Science and Technology of Mn+1AXn Phases, 1st Edition, Woodhead Pub, 2012.
  2. Sokol M., Natu V., Kota S., Barsoum M. W., On the chemical diversity of the max phases, Trends Chem., 1 (2), 210–223, 2019.
  3. Lin Z., Zhuo M., Zhou Y., Li M., Wang J., Microstructures and theoretical bulk modulus of layered ternary tantalum aluminum carbides, J. Am. Ceram. Soc., 89 (12), 3765–3769, 2006.
  4. Zhang J., Liu B., Wang J. Y., Zhou Y. C., Low-temperature instability of Ti2SnC: A combined transmission electron microscopy, differential scanning calorimetry, and X-ray diffraction investigations, J. Mater. Res., 24 (1), 39–49, 2009.
  5. Uddin M. M., Ali M. A., Ali M. S., Structural, elastic, electronic and optical properties of metastable MAX phase Ti5SiC4 compound, Indian J. Pure Appl. Phys., 54 (6), 386-390, 2016.
  6. Sürücü G., Erkişi A., The first principles investigation of structural, electronic, mechanical and lattice dynamical properties of the B and N Doped M2AX Type MAX Phases Ti2AlB0.5C0.5 and Ti2AlN0.5C0.5 Compounds, Boron, 3 (1), 24–32, 2018.
  7. Nowotny V. H., Strukturchemie einiger Verbindungen der Übergangsmetalle mit den elementen C, Si, Ge, Sn, Prog. Solid State Chem., 5 (C), 27–70,1971.
  8. Lapauw T., Halim J., Lu J., Cabioc'h T., Hultman L., Barsoum M. W., Lambrinou K., et al., Synthesis of the novel Zr3AlC2 MAX phase, J. Eur. Ceram. Soc., 36 (3), 943–947, 2016.
  9. Akhlaghi M., Tayebifard S. A., Salahi E., Shahedi A. M., Schmidt G., Self-propagating high-temperature synthesis of Ti3AlC2 MAX phase from mechanically-activated Ti/Al/graphite powder mixture, Ceram. Int., 44 (8), 9671–9678, 2018.
  10. Qu L., Bei G., Stelzer B., Rueß H., Schneider J. M., Cao D., Zwaag S. et al., Synthesis, crystal structure, microstructure and mechanical properties of (Ti1-xZrx)3SiC2 MAX phase solid solutions, Ceram. Int., 45 (1), 1400–1408, 2019.
  11. Drouelle E., Brunet V., Cormier J., Villechaise P., Sallot P., Naimi F., Bernard F. et al., Oxidation resistance of Ti3AlC2 and Ti3Al0.8Sn0.2C2 MAX phases: A comparison, J. Am. Ceram. Soc., 103 (2), 1270–1280, 2020.
  12. Clark D. W., Zinkle S. J., Patel M. K., Parish C. M., High temperature ion irradiation effects in MAX phase ceramics, Acta Mater., 105, 130–146, 2016.
  13. Gonzalez-Julian J., Mauer G., Sebold D., Mack D. E., Vassen R., Cr2AlC MAX phase as bond coat for thermal barrier coatings: Processing, testing under thermal gradient loading, and future challenges, J. Am. Ceram. Soc., 103 (4), 2362–2375, 2020.
  14. Jin S., Su T., Hu Q., Zhou A., Thermal