Journals / Bor Dergisi / 2021 / Cilt: 6 - Sayı: 1

Optimization of Ni-B Catalyst with Response Surface Methodology in Hydrogen Production

Ni-B katalizörünün hidrojen üretiminde yanıt yüzey yöntemi ile optimizasyonu

Pages
216–226
Publication Date
2021-03-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As a result of the validation tests, itwas revealed that the predictions obtained from the model developed using the response surface methodology are in good agreement with the experimental results.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The COVID-19 pandemic shows once again how important the use of clean and renewable energy sources is.
📊
Key Findings & Data:In this study, clean hydrogen, which is considered as the energy source of the future, was produced by the hydrolysis of NaBH4 using Ni-B catalysts.
💡
Conclusion & Impact:As a result of the validation tests, itwas revealed that the predictions obtained from the model developed using the response surface methodology are in good agreement with the experimental results.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Hidrojen · Ni-B Katalizörü · taguchi

Abstract

The COVID-19 pandemic shows once again how important the use of clean and renewable energy sources is. In this study, clean hydrogen, which is considered as the energy source of the future, was produced by the hydrolysis of NaBH4 using Ni-B catalysts. During the hydrolysis reaction, the effects of parameters such as reaction temperature, stirring speed, solid-liquid ratio and NaBH4_NaOH ratio in the fuel used, which are known to have a direct effect on the reaction kinetics, on the reaction rate were studied in detail by the response surface methodology. Experimental studies in the response surface methodology used were carried out using the Taguchi L9 orthogonal array and the efficiency of the parameters was determined by analysis of variance. As a result of the created model, optimum parameters for obtaining the maximum hydrogen production rate; reaction temperature347.17ºK; stirring speed 200.21 rpm; solid-liquid ratio 2.86 mgcatalyst/mlfuel; and the ratio of NaBH 4-NaOH 1.04. According to the analysis of variance, the efficiency of the parameters affecting the hydrogen generation rate was determined as reaction temperature, stirring speed and NaBH4_NaOH ratio, respectively. On the other hand, it has been seen that the effect of solid-liquid ratio does not appear clearly. As a result of the validation tests, itwas revealed that the predictions obtained from the model developed using the response surface methodology are in good agreement with the experimental results.

Özet

Son günlerde yaşanan COVID-19 salgını, temiz ve yenilenebilir enerji kaynaklarının kullanımının ne derece önemli olduğunu birkez daha göstermiştir. Bu çalışmada, geleceğin enerji kaynağı olarak düşünülen temiz hidrojen, Ni-B katalizörleri kullanılarak NaBH4’ün hidrolizi ile üretilmiştir. Hidroliz reaksiyonu esnasında reaksiyon kinetiğine doğrudan etkisinin olduğu bilinen ortam sıcaklığı, karıştırma hızı, katı-sıvı oranı ve kullanılan yakıtta NaBH4 _NaOH oranı gibi parametrelerin reaksiyon hızına olan etkileri yanıt yüzey metodu ile ayrıntılı olarak incelenmiştir. Kullanılan yanıt yüzey metodunda deneysel çalışmalar Taguchi L9 ortogonal dizisi kullanılarak gerçekleştirilmiş ve parametrelerin etkinliği varyans analizi ile belirlenmiştir. Oluşturulan model sonucunda, maksimum hidrojen üretimhızının eldesi için optimum parametreler; ortam sıcaklığı 347,17ºK; karıştırma hızı 200,21 rpm; katı-sıvı oranı 2,86 mgkatalizör/mlyakıt; ve NaBH4--NaOH oranı 1,04 olarak belirlenmiştir. Varyans analizine göre hidrojen üretim hızını etkileyen parametrelerin etkinliği sırasıyla reaksiyon sıcaklığı, karıştırma hızı ve NaBH4_NaOH oranı olarak belirlenmiştir. Buna karşılık katı-sıvı oranının etkisinin belirgin bir şekilde ortaya çıkmadığı görülmüştür. Yanıt yüzey yöntemi kullanılarak geliştirilen modelden elde edilen tahmin sonuçları ile deneysel verilerin birbirilerini doğruladığı, yapılan doğrulama deneyleri sonucunda ortaya konulmuştur.

🔖

Cite This Article

ELÇİÇEK, H. (2021). Optimization of Ni-B Catalyst with Response Surface Methodology in Hydrogen Production. Bor Dergisi, Cilt: 6 - Sayı: 1, 216–226. https://ajindex.com/articles/252055

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Wong, I. C. K., Ng, Y K., & Lui, V. W. Y (2014). Can¬cers of the lung, head and neck on the rise: perspecti¬ves on the genotoxicity of air pollution. Chinese Jour¬nal of Cancer, 33(10), 476-480
  2. Gilliland, F. D., Berhane, K., Rappaport, E. B., Tho¬mas, D. C., Avol, E., Gauderman, W. J.,. & Peters, J. M. (2001). The effects of ambient air pollution on school absenteeism due to respiratory illnesses. Epi¬demiology, 43-54
  3. Dincer, I. (2020). Covid-19 coronavirus: closing carbon age, but opening hydrogen age. International Journal of Energy Research, 44(8), 6093-6097
  4. Zoungrana, A., & Qakmakci, M. (2020). From non-renewable energy to renewable by harvesting salinity gradient power by reverse electrodialysis: A review. International Journal of Energy Research, 45(3), 3495-3522
  5. Mao, J., Zou, J., Lu, C., Zeng, X., & Ding, W. (2017). Hydrogen storage and hydrolysis properties of core-shell structured Mg-MFx (M= V, Ni, La and Ce) nano-composites prepared by arc plasma method. Journal of Power Sources, 366, 131-142
  6. Ma, M., Duan, R., Ouyang, L., Zhu, X., Chen, Z., Peng, C., & Zhu, M. (2017). Hydrogen storage and hydrogen generation properties of CaMg2-based alloys. Journal of Alloys and Compounds, 691, 929-935
  7. Wang, Y, Shen, Y, Qi, K., Cao, Z., Zhang, K., & Wu, S. (2016). Nanostructured cobalt-phosphorous catalysts for hydrogen generation from hydrolysis of sodium bo- rohydride solution. Renewable Energy, 89, 285-294
  8. Cui, Z., Guo, Y, & Ma, J. (2016). In situ synthesis of graphene supported Co-Sn-B alloy as an efficient ca-talyst for hydrogen generation from sodium borohy- dride hydrolysis. International Journal of Hydrogen Energy, 41(3), 1592-1599
  9. Aydin, M., Hasimoglu, A., Bayrak, Y, & Ozdemir, O. K. (2015). Kinetic properties of co-reduced Co-B/graphe- ne catalyst powder for hydrogen generation of sodium borohydride. Journal of Renewable and Sustainable Energy, 7(1), 013117
  10. Rakap, M. (2015). PVP-stabilized Ru-Rh nanopartic¬les as highly efficient catalysts for hydrogen generation from hydrolysis of ammonia borane. Journal of Alloys and Compounds, 649, 1025-1030
  11. Xu, D., Wang, H., Guo, Q., & Ji, S. (2011). Catalytic behavior of carbon supported Ni-B, Co-B and Co-Ni-B in hydrogen generation by hydrolysis of KBH4. Fuel Processing Technology, 92(8), 1606-1610
  12. Tong, D. G., Han, X., Chu, W., Chen, H., & Ji, X. Y. (2007). Preparation of mesoporous Co-B catalyst via self-assembled triblock copolymer templates. Ma