Journals / Bilişim Teknolojileri Dergisi / 2016 / Cilt: 9 - Sayı: 2

Development of a Predictive Maintenance Information System Using Statistical Process Control Principles

İstatistiksel Süreç Kontrolü Prensiplerini Kullanarak Bir Kestirimci Bakım Bilgi Sisteminin Geliştirilmesi

Pages
55–0
Publication Date
2016-05-25
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The developed system has been implemented in a packaging factory and a significant reduction in the costs associated with unplanned machine stoppages has been achieved.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Statistical process control techniques are frequently used to determine whether a production process takes place within the specified limits.
📊
Key Findings & Data:The use of these techniques for the analysis of inspection data (temperature, pressure etc.), which is taken from the production machines, is a rare application.
💡
Conclusion & Impact:The developed system has been implemented in a packaging factory and a significant reduction in the costs associated with unplanned machine stoppages has been achieved.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Anahtar Kelimeler İstatistiksel süreç kontrolü · kalite kontrol grafikleri · kestirimci bakım

Abstract

Statistical process control techniques are frequently used to determine whether a production process takes place within the specified limits. The use of these techniques for the analysis of inspection data (temperature, pressure etc.), which is taken from the production machines, is a rare application. In this study, a predictive maintenance information system employing quality control charts and process capability index for the analysis of machine inspecton data has been developed. In this system, the inspection values taken from a machine can be entered into the system instantenously and a warning message comes out, if a pattern is detected in the control chart constructed with those values. The developed system has been implemented in a packaging factory and a significant reduction in the costs associated with unplanned machine stoppages has been achieved.

Özet

İstatistiksel süreç kontrol teknikleri bir üretim sürecinin belirlenen limitler içinde üretim yapıp yapmadığının belirlenmesinde yaygın olarak kullanılmaktadır. Bu tekniklerin üretimi gerçekleştiren makinelerden alınan sıcaklık, basınç gibi muayene değerlerinin analizinde kullanımı ise az rastlanan bir uygulamadır. Bu çalışmada, kalite kontrol grafiklerini ve süreç yeterlilik indeksini makinelerden alınan ölçümlerin analizinde kullanan bir kestirimci bakım bilgi sistemi geliştirilmiştir. Bu sistemde, bir makineden alınan muayene değerlerinin sisteme girişi anında yapılabilmekte ve bu değerlerle oluşturulan kalite kontrol grafiğinde bir örüntü tespit edilmesi durumunda uyarı mesajı verilmektedir. Geliştirilen sistem, bir paketleme fabrikasında uygulanmış ve plansız makine duruşlarından kaynaklanan maliyetlerde önemli bir düşme sağlanmıştır.

🔖

Cite This Article

ILGIN, M. A., SÖYLER, D., SÖZEN, K. (2016). Development of a Predictive Maintenance Information System Using Statistical Process Control Principles. Bilişim Teknolojileri Dergisi, Cilt: 9 - Sayı: 2, 55–0. https://ajindex.com/articles/251989

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. D. Bansal, D.J. Evans, B. Jones, "A real-time predictive maintenance system for machine systems", International Journal of Machine Tools & Manufacture, 44 (7-8), 759-766, 2004.
  2. L. R. Contreras, C. Modi, A. Pennathur, "Integrating Simulatıon Modeling and Equipment Condition Diagnostics for Predictive Maintenance Strategies-A Case Study", Proceedings of the 2002
  3. Winter Simulation Conference, San Diego, CA, USA, 1289-1296, 8- 11 Aralık, 2002.
  4. M. C. Garcia, M. A. Sanz-Bobi, J. del Pico, "SIMAP: Intelligent System for Predictive Maintenance Application to the health condition monitoring of a wind turbine gearbox", Computers in Industry, 57 (6), 552-568, 2006.
  5. Z. Mehrafrooz, R. Noorossana, An integrated model based on statistical process control and maintenance, Computers & Industrial Engineering, 61, 1245-1255, 2011.
  6. B. Bergquist, P. Söderholm, Data Analysis for Condition-Based Railway Infrastructure Maintenance, Quality and Reliability Engineering International, 31, 773-781, 2015.
  7. M. B. C. Khoo, M. Xie, A Study of Time-between-Events Control Chart for the Monitoring of Regularly Maintained Systems, Quality and Reliability Engineering International, 25, 805-819,2009.
  8. Liping Liu, Miaomiao Yu, Yizhong Ma, Yiliu Tu, Economic and economic-statistical designs of an X control chart for two-unit series systems with condition-based maintenance, European Journal of Operational Research, 226, 491-499, 2013.
  9. J.A. Orosa, A.M. Costa, R. Santos, "Research about New Predictive- Maintenance Methodology using VBA for Marine Engineering Applications", Applications and Experiences of Quality Control, Bölüm 21, Editör:Ivanov, O., Intech, Rijeka, Croatia, 2011.
  10. D. Aslan, Kalite Kontrol, DEÜ Mühendislik Fakültesi Basım Ünitesi, İzmir, 2001. H. M. Wadsworth, "Statistical Process Control",Juran's QualityHandbook,Editörler: Juran, J.M. ve Godfrey, A.B., New York, 1999. [11] D. Noskievicova, "Complex Control Chart Interpretation", International Journal of Engineering Business Management, 5(13), 1-7, 2013. [12] L.J. Krajewski, L.P. Ritzman, M.K. Malhotra, Operations Management, Prentice Hall, New Jersey, 2009.
  11. C. Kahraman, İ. Kaya,"Süreç Doğruluk İndeksi ve Bulanık Karar Ortamında Kullanılması", TÜBAV Bilim Dergisi, 2 (2), 148-156, 2009.
  12. D.H. Besterfield, C. Besterfield-Michna, G.H. Besterfield, M. Besterfield-Sacre, Total Quality Management, Prentice-Hall, New Jersey, 2003.