Journals / Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi / 2020 / Cilt: 7 - Sayı: 2

Factorial Design-Based Process Optimization for Continuous Quality Improvement

Sürekli Kalite İyileştirme için Faktöriyel Tasarım Tabanlı Süreç Optimizasyonu

Pages
660–669
Publication Date
2020-12-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In addition, it was concluded that the proposed factorial design-based process optimization model could reduce more variance based on the specified target value.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The design of the experiment plays a key role to develop a new process or improve an existing process.
📊
Key Findings & Data:In the literature, factorial experimental designs are used for continuous quality improvement.
💡
Conclusion & Impact:In addition, it was concluded that the proposed factorial design-based process optimization model could reduce more variance based on the specified target value.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Quality Engineering · Factorial Experimental Design · Specified Target Value

Abstract

The design of the experiment plays a key role to develop a new process or improve an existing process. In the literature, factorial experimental designs are used for continuous quality improvement. This paper presents a novel methodology with a factorial experimental design in order to conduct an experiment data analysis for the optimization of design factors. The proposed methodology has five main steps. The first step is related to pre-experimental planning. The second step is the experimental phase with a factorial design. The third step analyzes data for an experiment. Next, a factorial design-based optimization model is firstly developed to get the optimal settings of design factors. The last step is the conclusions and recommendations step in order to validate the conclusions from the experiment. Finally, comparison studies are performed using the different target values for a numerical example from the current literature. In addition, it was concluded that the proposed factorial design-based process optimization model could reduce more variance based on the specified target value.

Özet

Deneyin tasarımı, yeni bir süreç geliştirmek veya mevcut bir süreci geliştirmek için kilit bir rol oynar. Literatürde sürekli kalite iyileştirme için faktöriyel deneysel tasarımları kullanılmıştır. Bu makalede, tasarım faktörlerinin optimizasyonu için bir deney verisi analizi yapmak amacıyla faktöriyel deney tasarımına sahip yeni bir yöntem sunulmaktadır. Önerilen yöntem beş ana adıma sahiptir. İlk adım deney öncesi planlama ile ilgilidir. İkinci adım faktöriyel tasarıma sahip deneysel aşamadır. Üçüncü adım bir deneye ait verileri analiz eder. Daha sonra, tasarım faktörlerinin en uygun değerlerini elde etmek için faktöriyel tasarıma dayalı optimizasyon modeli ilk defa geliştirilmiştir. Son adım deneyden elde edilen sonuçları doğrulamak için sonuçlar ve tavsiyeler adımdır. Son olarak, güncel literatürdeki sayısal bir örnek için farklı hedef değerler kullanılarak karşılaştırma çalışmaları yapılmıştır. Ayrıca, önerilen faktöriyel tasarıma dayalı süreç optimizasyon modelinin belirtilen hedef değere göre daha fazla varyansı azaltabileceği sonucuna varılmıştır.

🔖

Cite This Article

ÖZDEMİR, A., UÇURUM, M., SERENCAM, H. (2020). Factorial Design-Based Process Optimization for Continuous Quality Improvement. Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi, Cilt: 7 - Sayı: 2, 660–669. https://ajindex.com/articles/251666

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (17)

  1. Montgomery, D. C. (2012). Introduction to Statistical Quality Control. New York: John Wiley & Sons Inc., New York, USA
  2. Vining, G. G., & Myers, R. H. (1990). Combining Taguchi and response surface philosophies: a dual response approach. Journal of Quality Technology, 22(1), 38-45
  3. Del Castillo, E., & Montgomery, D. C. (1993). A nonlinear programming solution to the dual response problem. Journal of Quality Technology, 25(3), 199-204
  4. Lin, D. K., & Tu, W. (1995). Dual response surface optimization. Journal of Quality Technology, 27(1), 34-39
  5. Copeland, K. A., & Nelson, P. R. (1996). Dual response optimization via direct function minimization. Journal of Quality Technology, 28(3), 331-336
  6. Ames, A. E., Mattucci, N., Macdonald, S., Szonyi, G., & Hawkins, D. M. (1997). Quality loss functions for optimization across multiple response surfaces. Journal of Quality Technology, 29(3), 339-346
  7. Borror, C. M. (1998). Mean and variance modeling with qualitative responses: A case study. Quality Engineering, 11(1), 141-148
  8. Kim, K. J., & Lin, D. K. (1998). Dual response surface optimization: a fuzzy modeling approach. Journal of Quality Technology, 30(1), 1-10
  9. Kim, Y. J., & Cho, B. R. (2000). Economic integration of design optimization. Quality Engineering, 12(4), 561-567
  10. Kim, Y. J., & Cho, B. R. (2002). Development of priority-based robust design. Quality Engineering, 14(3), 355-363
  11. Tang, L. C., & Xu, K. (2002). A unified approach for dual response surface optimization. Journal of Quality Technology, 34(4), 437-447
  12. Ding, R., Lin, D. K., & Wei, D. (2004). Dual-response surface optimization: a weighted MSE approach. Quality Engineering, 16(3), 377-385
  13. Shin, S., Samanlioglu, F., Cho, B. R., & Wiecek, M. M. (2011). Computing trade-offs in robust design: perspectives of the mean squared error. Computers & Industrial Engineering, 60(2), 248-255
  14. Köksoy, O. (2006). Multiresponse robust design: Mean square error (MSE) criterion. Applied Mathematics and Computation, 175(2), 1716-1729
  15. Park, H., Park, S. H., Kong, H. B., & Lee, I. (2012). Weighted sum MSE minimization under per-BS power constraint for network MIMO systems. IEEE Communications Letters, 16(3), 360-363
  16. Shaibu, A. B., & Cho, B. R. (2009). Another view of dual response surface modeling and optimization in robust parameter design. The International Journal of Advanced Manufacturing Technology, 41(7-8), 631- 641
  17. Costa, N. R. P. (2010). S