SavedAdd your journal

Journals / Balıkesir Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2009 / Cilt: 11 - Sayı: 1

Definition of fault resources and quality improvement by design failure mode and effect analysis for machinery manufacturing company

Makine imalatı yapan bir işletmede tasarım hata türü ve etkileri analizi ile hata kaynaklarının belirlenmesi ve kalitenin iyileştirilmesi

Muzaffer Kadıoğlu
Muzaffer KADIOĞLU
Emine Uçmuş
Demet Gönen
Pages
42–55
Publication Date
2009-06-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In this study, determining the design failures of a product before its production is intended to make FMEA analysis and the evaluation of this study is presented.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Failure Mode and Effect Analysis (FMEA) is a method which displays existing or probable faults and also takes into consideration the effects of them and by giving priorities to faults effects to provide opportunities of minimizing their effects.
📊
Key Findings & Data:Faults mean costs, that is why the main reasons of existing and probable faults must be found in order to prevent their occurrences.
💡
Conclusion & Impact:In this study, determining the design failures of a product before its production is intended to make FMEA analysis and the evaluation of this study is presented.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Quality · failure mode · design failure mode and effect analysis

Abstract

Failure Mode and Effect Analysis (FMEA) is a method which displays existing or probable faults and also takes into consideration the effects of them and by giving priorities to faults effects to provide opportunities of minimizing their effects. Faults mean costs, that is why the main reasons of existing and probable faults must be found in order to prevent their occurrences. In this study, determining the design failures of a product before its production is intended to make FMEA analysis and the evaluation of this study is presented.

Özet

Hata Türü ve Etkileri Analizi (FMEA), mevcut veya olası hataları ortaya koyan, bu hataların yaratabileceği etkileri göz önünde bulunduran ve etkilerine göre hataları önceliklendirerek oluşmalarının minimize edilmesini sağlayan bir yöntemdir. Hata maliyet getirir, bu nedenle, mevcut veya olası hataların nedenlerine inilerek oluşmalarının önlenmesi gerekmektedir. Bu çalışmada, bir ürünün tasarımından kaynaklanabilecek hataların, üretime başlamadan belirlenmesi amacıyla Tasarım FMEA çalışması yapılmış ve çalışmanın değerlendirilmesi verilmiştir.

🔖

Cite This Article

Kadıoğlu, M., KADIOĞLU, M., Uçmuş, E., Gönen, D. (2009). Definition of fault resources and quality improvement by design failure mode and effect analysis for machinery manufacturing company. Balıkesir Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Cilt: 11 - Sayı: 1, 42–55. https://ajindex.com/articles/251246

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (5)

  1. Stamatis, D.H., “Failure Mode and Effect Analysis FMEA from Theory to Execution”, Quality Press,
  2. Milwuakee (1995) (2) Chin. K.-S., ve diğerleri, “Failure mode and effects analysis using a group-based evidential reasoning approach”, Computers & Operations Research, 36, p:1768–1779 (2009) (3) Potential Failure Mode And Effects Analysis In Design (Design FMEA) And Potential Failure Mode And Effects Analysis In Manufacturing And Assembly Processes (Process FMEA) Reference Manual-SAE J1739 JUL94 SAE Recommended Practice (4) Musubeyli, N., “Tasarım Hata Türü ve Etkileri Analizinin Etkinliği için Bir Model ve Uygulaması”, Endüstri Mühendisliği Dergisi, Cilt: 15, Sayı: 3, Sayfa:17-26 (2002). (5) Potential Failure Mode And Effects Analysis (FMEA) Reference Manual, Third Edition,
  3. April (2001),
  4. DaimlerChrysler Corporation, Ford Motor Company, General Motors Corporation (6) Gönen, D., “Hata Türleri ve Etkileri Analizi ve Bir Uygulama Çalışması”, Yüksek Lisans Tezi, Balıkesir Üniversitesi,
  5. Fen Bilimleri Enstitüsü, Balıkesir (2004). (7) Narayanagounder S., and Gurusami K.,“A New Approach for Prioritization of Failure Modes in Design FMEA using ANOVA”, Proceedings of World Academy of Science, Engineering and Technology, 37, (2009)