SavedAdd your journal

Journals / Turkish Journal of Chemistry / 2006 / Cilt: 30 - Sayı: 1

Synthesis of a Ruthenium Complex Bound to a Polyimide Matrix: Investigating the Catalytic Properties in a Hydrosilylation Reaction

Turgay SEÇKİN
Süleyman KÖYTEPE
İsmail ÖZDEMİR
Bekir ÇETİNKAYA
Pages
93–101
Publication Date
2006-01-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Leaching of ruthenium into the reaction mixture, found to be in the range of 60-75 ppm, was an indication of reduced catalyst bleeding.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:3,6-Bis(dimethylamino)acridine(hexamethylbenzene)dichlororuthenium(II) was used as a tricyclic heteroatomic monomer to prepare polyimides from the corresponding dianhyrides by solution condensation.
📊
Key Findings & Data:The ruthenium complex monomer was synthesized starting from [RuCl2(HMB)]2 and 3-6-bis(dimethylamino)acridine.
💡
Conclusion & Impact:Leaching of ruthenium into the reaction mixture, found to be in the range of 60-75 ppm, was an indication of reduced catalyst bleeding.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Heterogeneous catalysis · Ruthenium · Polyimide

Abstract

3,6-Bis(dimethylamino)acridine(hexamethylbenzene)dichlororuthenium(II) was used as a tricyclic heteroatomic monomer to prepare polyimides from the corresponding dianhyrides by solution condensation. The ruthenium complex monomer was synthesized starting from [RuCl2(HMB)]2 and 3-6-bis(dimethylamino)acridine. The polymers had inherent viscosities of 1.77 to 2.11 and were soluble in most polar solvents. The glass transition temperatures were in the range of 204 to 298 °C and the 10% weight loss in the range of 506-626 °C, depending upon the structure of the dianhyride monomer. The catalytic activity of the polyimides tested in a hydrosilylation reaction of acetophenone was up to 90%. Leaching of ruthenium into the reaction mixture, found to be in the range of 60-75 ppm, was an indication of reduced catalyst bleeding.

Özet

3,6-Bis(dimethylamino)acridine(hexamethylbenzene)dichlororuthenium(II) was used as a tricyclic heteroatomic monomer to prepare polyimides from the corresponding dianhyrides by solution condensation. The ruthenium complex monomer was synthesized starting from [RuCl2(HMB)]2 and 3-6-bis(dimethylamino)acridine. The polymers had inherent viscosities of 1.77 to 2.11 and were soluble in most polar solvents. The glass transition temperatures were in the range of 204 to 298 °C and the 10% weight loss in the range of 506-626 °C, depending upon the structure of the dianhyride monomer. The catalytic activity of the polyimides tested in a hydrosilylation reaction of acetophenone was up to 90%. Leaching of ruthenium into the reaction mixture, found to be in the range of 60-75 ppm, was an indication of reduced catalyst bleeding.

🔖

Cite This Article

SEÇKİN, T., KÖYTEPE, S., ÖZDEMİR, İ., ÇETİNKAYA, B. (2006). Synthesis of a Ruthenium Complex Bound to a Polyimide Matrix: Investigating the Catalytic Properties in a Hydrosilylation Reaction. Turkish Journal of Chemistry, Cilt: 30 - Sayı: 1, 93–101. https://ajindex.com/articles/227786

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (26)

  1. B. Marcinies, “Comprehensive Handbook on Hydrosilylation” Pergamon Press, London 1992.
  2. L.H. Sommer, E.W. Peietrusza and F.C. Whitmore, J. Am. Chem. Soc. 69, 188-189 (1947).
  3. J.L. Speier, J.A. Webster and G.H. Barnes, J. Am. Chem. Soc. 79, 974-979 (1957).
  4. J.L. Speier, Adv. Organomet. Chem. 17, 407-447 (1979).
  5. B.D.S. Karstedt, General Electric Co., USP 226928, 1972.
  6. Y. Seki, K. Takeshita, K. Kawamato, S. Murai and N. Sonoda, J. Org. Chem. 51, 3890-3895 (1986).
  7. F. Kakuichi, Y. Tanaka, N. Chatani and S. Murai, J. Organomet. Chem. 456, 45-47 (1993).
  8. R. Takeuchi and H. Yasue, Organometallics, 15, 2098-2102 (1996).
  9. A.M. Lapointe, F.C. Rix and M. Brookhart, J. Am. Chem. Soc. 119, 906-917 (1997).
  10. P. Steffanut, J.A. Osborne, A. Decain and J. Fisher, Chem. Eur. J. 4, 2008-2017 (1998).
  11. S. Murai, F. Kakiuchi, S. Sekine, Y. Tanaka, M. Sonoda and N. Chatani. Nature, 366, 529-531 (1993). T. Se¸ckin, S. Koytepe, ˙I. ¨Ozdemir, N. G¨urb¨uz and B. C¸ etinkaya, J. Inorg. Organomet. P. 14, 177-190 (2004).
  12. B. Marciniec, Silicon Chemistry, 1, 155-175 (2002).
  13. R. Dralce, R. Dunn, D.C. Sherrington and S.J. Thomson, Chem. Commun. 1931-1932 (2000).
  14. Z.M. Michalsca, K. Strzelec and J.W. Sobczak, J. Mol. Catal. A-Chem. 156, 91-102 (2000).
  15. A. Carmona, A. Corma, M. Iglesias, A. San. Jose and F. Sanchez, J. Organomet. Chem. 492, 11-21 (1995).
  16. J.O. Krause, S. Lubdad, O. Nuken and M. Buchmeiser, Adv. Synth. Catal. 345, 996-1004 (2003). K.L. Mittal, “Polyimides: Synthesis, characterization and applications” Vols. 1 & 2, Plenum, New York, 1984. M.K. Ghosh and K.L. Mittal, “Polyimides: Fundamentals and Applications” Marcel Dekker, New York, D. Wilson, H.D. Stenzenberger and P.M. Hergenrother, “Polyimides” Blackie, Glasgow, 1990.
  17. T. Seckin, S. Koytepe, S. Demir, I. ¨Ozdemir and B. Centinkaya, J. Inorg. Organomet. P. 13, 223-235 (2003).
  18. C.P. Yang, Y.Y. Su and F.Z. Hsiao, Polymer 45, 7529-7538 (2004).
  19. T. Seckin, S. Koytepe, I. ¨Ozdemir, B. Cetinkaya, J. Inorg. Organomet. P., 13, 9-20 (2003).
  20. Ha. Yagci and L.J. Mathias, Polymer, 39, 3779-3786 (1998).
  21. T. Seckin, I. ¨Ozdemir, B. Cetinkaya and S. Koytepe, J. Mol. Catal. A-Chem., 179, 263-270 (2002).
  22. K.U. Jeong, J.J. Kim and T.H. Yoon, Polymer 42, 6019-6030 (2001).
  23. R.H. Vora, S.H. Goh and T.S. Chung, Polymer Eng. Sci. 40, 1318-1329 (2000).
  24. D.S. Reddy, C.F. Shu and F.I. Wu, J. Polym. Sci. Pol. Chem. 40, 262-268 (2002).
  25. J.G. Liu, M.H. He, H.W. Zhou, Z.G. Qian, F.S. Wang and S.Y. Yang, J. Polym. Sci. Pol. Chem. 40, 119 (2002).
  26. S.H. Hsiao and W.T. Chen, J. P