SavedAdd your journal

Journals / Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi / 2016 / Cilt: 18 - Sayı: 54

KOLEMANİT CEVHERİNİN TEK TANE DARBE KIRILMA DAĞILIMI FONKSİYONLARININ AĞIRLIK DÜŞÜRME TEKNİĞİ İLE ANALİZİ

ANALYSIS OF SINGLE PARTICLE IMPACT BREAKAGE DISTRIBUTION FUNCTIONS OF A COLEMANITE ORE BY DROP WEIGHT TECHNIQUE

ÖMÜRDEN GENÇ
Pages
685–698
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Ecs-t10 comminution model was successfully fitted to the breakage test results. t-family curve approach [1, 4, 5] was used to re-construct specific breakage functions. t10-tn family curves were modelled and empirical regression equations were proposed to reconstruct breakage functions at different impact energy levels which could be used in models of crushers

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Single particle impact breakage distribution functions of a colemanite ore were estimated using the standard test methods and data evaluation methodology developed by Narayanan [1].
📊
Key Findings & Data:For this purpose, a modified manual version of a JK Tech drop weight test device [2] was used.
💡
Conclusion & Impact:Ecs-t10 comminution model was successfully fitted to the breakage test results. t-family curve approach [1, 4, 5] was used to re-construct specific breakage functions. t10-tn family curves were modelled and empirical regression equations were proposed to reconstruct breakage functions at different impact energy levels which could be used in models of crushers
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Kolemanit · Ufalama · Modelleme

Abstract

Single particle impact breakage distribution functions of a colemanite ore were estimated using the standard test methods and data evaluation methodology developed by Narayanan [1]. For this purpose, a modified manual version of a JK Tech drop weight test device [2] was used. Breakage test results were used to establish the relationship between specific comminution energy (Ecs) and impact breakage product fineness which was represented by the size distribution parameter t10. Ecs-t10 comminution model given by Napier Munn et.al [3] was validated for the breakage test results. Ecs-t10 comminution model was successfully fitted to the breakage test results. t-family curve approach [1, 4, 5] was used to re-construct specific breakage functions. t10-tn family curves were modelled and empirical regression equations were proposed to reconstruct breakage functions at different impact energy levels which could be used in models of crushers

Özet

Kolemanit cevherinin tek tane darbe kırılma dağılımı fonksiyonları Narayanan [1] tarafından geliştirilen standard test yöntemleri ve veri değerlendirme metodolojisi kullanılarak tahmin edilmiştir. Bu amaçla, modifiye edilmiş JK Tech ağırlık düşürme test aletinin [2] manuel versiyonu kullanılmıştır. Kırılma testi sonuçları özgül ufalama enerjisi (Ecs) ve t10 boyut dağılımı parametresi ile temsil edilen darbe kırılması ürün inceliği arasındaki ilişkinin kurulmasında kullanılmıştır. Napier Munn vd., [3] tarafından verilen Ecs-t10 ufalama modeli kırılma testi sonuçları için sınanmıştır. Test sonuçları Ecs-t10 ufalama modeline başarılı bir şekilde uyum sağlamıştır. t-aile eğrisi yaklaşımı [1, 4, 5] özgül kırılma fonksiyonlarının oluşturulmasında kullanılmıştır. t10-tn aile eğrileri modellenmiş ve eğrilerin ampirik regresyon denklemleri kırıcı modelleri için kırılma fonksiyonunun farklı enerji seviyelerinde oluşturulması için önerilmiştir

🔖

Cite This Article

GENÇ, Ö. (2016). KOLEMANİT CEVHERİNİN TEK TANE DARBE KIRILMA DAĞILIMI FONKSİYONLARININ AĞIRLIK DÜŞÜRME TEKNİĞİ İLE ANALİZİ. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, Cilt: 18 - Sayı: 54, 685–698. https://ajindex.com/articles/222299

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Narayanan, S.S. Development of a Laboratory Single Particle Breakage Technique and Its Application to Ball Mill Modelling and Scale-up, PhD Thesis. JKMRC, The University of Queensland, Australia, 1985
  2. Brown, D., Grimes, A. Procedure for JKTech drop weight breakage test, JKTech Operating Manual, The University of Queensland, Australia, 2005
  3. Napier Munn, T.J., Morrell, S, Morrison, R.D, Kojovic, T, Mineral Comminution Circuits Their Operation and Optimization. JKMRC Monograph Series in Mining and Mineral Processing, Australia, Brisbane: No. 2, The University of Queensland, 2005
  4. Narayanan, S.S. Single particle breakage tests: a review of principles and applications to comminution modelling, Bull. Proc. Australas. Inst. Min. Metall., 291(4), 1986, p49-58
  5. Narayanan, S.S. Modelling the performance of industrial ball mills using single particle breakage data, International Journal of Mineral Processing, 20, 1987a, p211- 228
  6. Kogel, E.J. Trivedi, C.N. Barker, M.J. Krukowski, T.S. Industrial Minerals and Rocks, 7 th Edition, Society for Mining, Metallurgy and Exploration, Inc. 2006
  7. Weedon, D.M. A perfect matrix model for ball mills, Minerals Engineering, Permagon Pres.,14 (10), 2001, p1225-1236
  8. Andersen, J.S. Development of a Cone Crusher Model, M.Eng.Sc. Thesis, The University of Queensland, JKMRC, 1988
  9. Man, Y.T. A Model-based Scale-up Procedure for Wet, Overflow Ball Mills, PhD Thesis, JKMRC, Department of Mining, Minerals and Materials Engineering, The University of Queensland, 2000
  10. Weichert, R. Herbst, J.A. An ultrafast load cell device for measuring particle breakage, Nürnberg: Proceedings, 1st World Congress on Particle Technology, Part 2, 1986. p3- 14
  11. Fandrich, R.G. Clout, J.M.F. Bourgeois, F.S. The CSIRO Hopkinson Bar facility for large diameter particle breakage, Minerals Engineering, 11 (9), 1998, p861-869
  12. Tavares, L.M. King, R.P. Single particle fracture under impact loading, International Journal of Mineral Processing, 12 (1), 1998, p43-50
  13. Bourgeois, F.S. Banini, G.A. A portable load cell for in-situ ore impact breakage testing, International Journal of Mineral Processing, 65, 2002, p31-54
  14. Austin, L.G. Luckie, P.L. Methods for determination of breakage distribution parameters, Powder Technology, 5, 1971/72, p215-222
  15. Weller, K.R. Sterns, U.J. Artone, E. Bruchard, W.J. Multicomponent models of grinding and classification for scale-up from continuous small or pilot scale circuit