Journals / Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi / 2017 / Cilt: 19 - Sayı: 55

The Failure Probability of The Coupling Beams with Monte Carlo Simulation

Bağ Kirişlerinin Göçme Olasılıklarının Monte Carlo Simülasyonu ile Belirlenmesi

Pages
92–99
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In order to evaluate the r-values by using magnified beam algorithm, an adequate number of coupled shear walls having several geometries commonly used in construction were considered and then failure probabilities of coupling beams were calculated using Monte Carlo simulation

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Since lateral loads cause bending with high shear stresses in coupling beams, the structural behavior of a coupled shear walls is greatly affected by the behavior of the coupling beams which depends on its geometrical, mechanical properties and also coupling ratio (r).
📊
Key Findings & Data:The value of r considered to be one of the major issues in nonlinear analysis in coupled shear walls represents the proportion of overturning moment resisted by the coupling action.
💡
Conclusion & Impact:In order to evaluate the r-values by using magnified beam algorithm, an adequate number of coupled shear walls having several geometries commonly used in construction were considered and then failure probabilities of coupling beams were calculated using Monte Carlo simulation
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Boşluklu perdeler · Bağ kirişi katkı oranı · Rijitlik düzeltme katsayısı

Abstract

Since lateral loads cause bending with high shear stresses in coupling beams, the structural behavior of a coupled shear walls is greatly affected by the behavior of the coupling beams which depends on its geometrical, mechanical properties and also coupling ratio (r). The value of r considered to be one of the major issues in nonlinear analysis in coupled shear walls represents the proportion of overturning moment resisted by the coupling action. In order to evaluate the r-values by using magnified beam algorithm, an adequate number of coupled shear walls having several geometries commonly used in construction were considered and then failure probabilities of coupling beams were calculated using Monte Carlo simulation

Özet

Yatay yükler bağ kirişlerinde eğilme ve beraberinde önemli oranda kesme gerilmelerine neden olduğu için, boşluklu perdeli sistemlerin yapısal davranışları bağ kirişlerinin geometrik, mekanik özellikleri ve bağ kirişi katkı oranı (r) ile yakından alakalı olan davranışlarından oldukça fazla etkilenmektedir. Bu nedenle, r-değerleri boşluklu perdeli sistemlerin doğrusal olmayan hesabında önemli bir parametre olarak düşünülebilir. Bu çalışmada “r” değerlerini belirlemek amacıyla uygulamada sıkça karşılaşılan geometriye sahip yeterli sayıda boşluklu perdeli sistemler dikkate alınarak bağ kirişi katkı oranları genişletilmiş çubuk teorisi yardımı ile ifade edilmiş ve Monte Carlo simülasyonu ile sözkonusu bağ kirişlerin göçme olasılıkları hesaplanmıştır

🔖

Cite This Article

DORAN, B., ALACALI, S. (2017). The Failure Probability of The Coupling Beams with Monte Carlo Simulation. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, Cilt: 19 - Sayı: 55, 92–99. https://ajindex.com/articles/222265

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Pala S, Özmen G. Effective Stiffness of Coupling Beams in Structural Walls, Computer and Structures 54(5): 1995, pp.925-931.
  2. Chaallal O, Gauthier D. Malenfant P. Classification Methodology For Coupled Shear Walls, Journal of Structural 122(12): 1996, pp.1453-1458.
  3. Tezcan SS, Kaya ZD. The Effective Rigidity of a Coupled Shear Wall. Bogazici University, Department of Civil Engineering, Vedat Yerlici- Engineering and Education, A Volume Honoring Prof.Dr. Vedat Yerlici, Istanbul, 1997, pp.361-370.
  4. Harries KA, Gong B, Shahrooz BM. Behavior and Design of Reinforced Concrete, Steel, and Steel-concrete Coupling Spectra 16(4): 2000, pp.775-799.
  5. El-Tawil S, Kuenzli CM. Pushover of Hybird Coupled Walls. I: Analysis and Behavior, Journal of Structural Engineering, ASCE 128(10): 2002, pp.1282-1289.
  6. El-Tawil S, Kuenzli CM, Hassan M. Pushover of Hybird Coupled Walls. I: Design and Modeling, Journal of Structural 128(10): 2002, pp.1272-1281.
  7. Hassan M, El-Tawil S. Inelastic Dynamic Behavior of Hybird Coupled Walls, Journal of Structural Engineering, ASCE 130(2): 2004, pp.285-296.
  8. Kent A, Harries et al. Parametric Study of Coupled Wall Behavior- Implications for the Design of Coupling Structural 2004, pp.480-488. Journal of 130(3): Xilin-L, Yuantao C. Modeling of Coupled Shear Walls and Its Experimental Verification, Journal of Structural Engineering 131(1): 2005, pp.75-84.
  9. Wan-Shin P, Hyun-Do Y, Jae-Yong C, Yong-Chul K. Experimental studies on seismic behavior of steel coupling Engineering and Mechanics, Techno Press Journal 20(6), 2006. Doran B. Elastic-Plastic Analysis Of R/C Coupled Shear Walls: The Equivalent Stiffness Ratio Of The Tie Elements, Indian Institute of Science 83: 2004, Pp.87-94. Doran B. A Magnified Beam Algorithm To Determine The Coupling Ratios of R/C Coupled Shear Walls. Struct. Design Tall Spec. Build. 18 (8): 2009, Pp.921-929. Wadsworth HM. Handbook of Statistical Methods for Engineers and Scientists. McGrawHill Inc, NewYork, 1997.
  10. Saatcioglu M, Derecho AT, Corley WG. Parametric Study of Eartquake- Resistant Coupled Walls. ASCE Journal of the Structural Division 113(1): 1987, pp.141-157.
  11. Guizani L, Chaallal O. Demande en Ductilité des murs de Refend Couplés. Proceeding of the Seventh Canadian Conference on Earthquake Engineering, pp.461-468. 1995,
  12. Harries KA, Mitchell D, Redwood RG, Cook WD. Seismic Design and Analysis of Prototype Coupled Wall Structures. Canadian Journal of Civil Engineering 25(5): 1998, pp.808- 818. Pekau OA, Cistera V. Behaviour